Reviews
Cost-effective. We make it compact.
2023.As of June, the OEM Product is less than 7,000 yen and the TwinAir is just over 4,000 yen. Other Brand Product is cheaper, perhaps because it is no longer in print.
I have purchased TwinAir air filters 3.4 times now, including other models.
Mounting Rubber for mounting is included.
TwinAir's Sticker comes as a bonus.
Unlike the OEM product, which has a square corner on the outside corner, this product has rounded corners and is generally smaller in size.
Of course, the small size does not impede the installation. It can be installed as usual. In fact, it is a good impression because Dust does not adhere to the walls of the Air cleanerBox when inserting and removing it.
Unlike the OEM Product's slightly harder and coarser Sponge, the white surface with the logo is made of a softer, denser, and chewier Sponge. The inner backside is made of a slightly sugar-crystal, scuffier Sponge.
I didn't notice any change in the intake performance of either OEM Product or TwinAir that would require a Setting change in my case.
For maintenance, I use kerosene to lightly clean the oil and then wash with diluted dishwashing detergent.
It is durable, but there are some things to note and things I have noticed over the years of using several of them. Below is a comparison with OEM Product.
I have the impression that the adhesive that glues the sponges together is not as strong as the OEM product. Therefore, it is recommended not to clean the Sponge with kerosene many times in one maintenance. The white sponge on the outside and the black sponge on the back side came off once.
Secondly, it is better not to squeeze harder when cleaning than the OEM product, as the Sponge is softer than the OEM product and will become squishy and deteriorate faster if squeezed harder.
However, the adhesive strength of Sponge is also relatively weak, so moisture must be dried thoroughly.
In my case, I shake it gently by hand to drain water, apply a weak air blow, or wrap it gently with a Paper towel to absorb water. After that, I dry it in the shade enough to let it dry, apply Oil, and dry it in the shade again to let the Oil's water evaporate before putting it on.
If the above precautions are taken, the product is a little inferior to OEM products, but it shows reasonable durability.
Poor air cleaner performance can cause clogging of the carburetor and injector, as well as unexpectedly introducing wounds around the piston. It is also common for the filter itself to deteriorate and fall apart, becoming the cause of troublemaking itself, so it is best not to use cheap products with unclear filter capabilities.
In this respect, TwinAir is a product that has been around for a long time, so it is Brand-oriented.
However, I personally think that the most important thing is frequent maintenance.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Joint link in Chain
I bought RossiMODEL's Chain, but only LINK was fluorescent yellow color, so I bought Silver color as same as other LINK.
I haven't put it on yet, but I think it will be a calming color scheme.
View detail
Fits: YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ450F, YAMAHA YZ450FX, HONDA XLR200R, HONDA XR200R, YAMAHA WR250, YAMAHA WR250F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR450F, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ400F, YAMAHA YZ426F
Both toothpaste and tooth Brush and Sprocket are SUNSTAR!
*Motivation to purchase
I think the setting is close to the limit with normal chain. However, in order to increase the number of LINKs and replace the chain this time, I'd like to swing even shorter." I thought that I would be able to order a 48th, but at the time it was sold out, so I bought a 47th.
I have been using a 0.45, and I felt that the chain was not too tight due to mud adhesion, and it was lightweight and wonderfully durable! I felt that it is lightweight and durable.
The design was different from the usual aluminum and steel Sprocket, and was novel.
0Because I liked the surface treatment, which is not too flashy and calm.
Installation
With the vehicle mounted, loosen all the mounting bolts/nuts on the nut side.
0Wheel was removed from the vehicle body and all HEXBolt was removed using an electric Driver.
0Bolt nut came with a new one, but it seemed to have no problems, so we reused it.
The bolt is then tightened several times in equal groups, ending with the final tightening using a hex wrench and long glasses.
*Feelings after use
0The speed of the car was only 2 guns different from before, but on long climbs, the car was able to accelerate even at GEAR and vehicle speeds that used to stall, and I felt that I was able to easily achieve speed without stalling.
I feel like the front up is easier when going over the 0 log/stiretc.
0When descending a gravel road, if done as with the previous GEAR selection, Engine braking became too effective and unstable.
I wanted to try 48 Ding, considering both the 0 up/down.
I could not exchange them without tools this time, but I could ask the shop to do it for me.
View detail
Fits: YAMAHA YZ85, YAMAHA YZ85, YAMAHA SR400, YAMAHA SR400, YAMAHA YZ85, YAMAHA YZ85, YAMAHA SR400, YAMAHA SR400, YAMAHA STRYKER, YAMAHA STRYKER, YAMAHA YZ85, YAMAHA SR400, YAMAHA SR400, YAMAHA STRYKER, YAMAHA STRYKER, YAMAHA STRYKER, YAMAHA STRYKER, YAMAHA STRYKER BULLET COWL, YAMAHA STRYKER BULLET COWL, YAMAHA STRYKER BULLET COWL
OEM VALVE PACKING INSTALLATION
TW200 PETCOCK VALVE PACKING GASKET IS VERY HARD FIND THESEDAYS.So I ordered one from The Webike Shop.Valve Packing Installation process is very easy. First I had to remove all the fuel in the tank and removed the petcock from the tank .Older petcock valve gasket might need to replace cause sometime rubber material may worn out or cracked . mine still in a good shape but I got a brand new one inmy hand. to reach the older valve packing ,first unscrew the two phillips bolt that hold the valve in place. valve has a o-ring seal that fuel doesn't leak out .then the older valve packing. place a new valve packing and install the rest in an order .product price is so cheap.I ordered so many product from the WEBIKE store and never had a problem. Great Communication and Smooth Transaction.Highly Recommended .Webike Shop Beyond 5star View detail
Fits: YAMAHA YZ400 F, YAMAHA YZ125, YAMAHA WR400 F, YAMAHA WR250 F, KAWASAKI KLX250, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HONDA XR250, KAWASAKI KX100 95-17, KAWASAKI KX80 90-17, KAWASAKI KX85 90-17, YAMAHA WR250 R, YAMAHA WR250 X, YAMAHA WR426 F 01-02, YAMAHA WR450 F 03-04, YAMAHA YZ250 90-03, YAMAHA YZ250 F 90-03, YAMAHA YZ426 F 00-02, YAMAHA YZ450 F 03, YAMAHA YZ80 90-17
Comfortable to work with
Used for Front forkOverhaul of Tenere700.
DamperROD could be attached and detached safely and securely.
View detail
Fits: ADIVA N125, ADIVA R125, APRILIA Leonardo 125, APRILIA Leonardo 150, bimota Bellaire 600, KYMCO Racing 125, KYMCO Racing 150, MALAGUTI Madison 125, MALAGUTI Madison 150., PIAGGIO X9-200 Amalfi, SUZUKI Intruder LC125, YAMAHA FZS600 Fazer, YAMAHA WR400F, YAMAHA YZ400F, bimota YB-7 Folgore, APRILIA Scarabeo 125, APRILIA Scarabeo 150, BENELLI Velvet 125, BENELLI Velvet 250, BETA rr 4t lc enduro
Reliable Quality
It was used on a 1997 KLX250es. The mileage is 38,000 km, and since we purchased a used vehicle with 36,000 km mileage, we do not trust anything other than engine oil replacement because it is the standard delivery maintenance of a certain large-hand motorcycle dealership. So, I replaced the Plug with Timing Oil and Element replacement.
The KLX250es is easy because you can simply remove the Right Shroud and replace it quickly and easily without having to remove the Tank!
Of course, before removing the plug cord, I used an air duster to remove dust and garbage from around the plug.
It takes less than 5 minutes and is easy to replace.
The removed Plug was so rusted and black that I was amazed that the Engine had been able to hang on to it.
After all, Motorcycle is the most trustworthy one that you can manage and ride by yourself.
View detail
Fits: ADIVA N125, ADIVA R125, APRILIA Leonardo 125, APRILIA Leonardo 150, bimota Bellaire 600, KYMCO Racing 125, KYMCO Racing 150, MALAGUTI Madison 125, MALAGUTI Madison 150., PIAGGIO X9-200 Amalfi, SUZUKI Intruder LC125, YAMAHA FZS600 Fazer, YAMAHA WR400F, YAMAHA YZ400F, bimota YB-7 Folgore, APRILIA Scarabeo 125, APRILIA Scarabeo 150, BENELLI Velvet 125, BENELLI Velvet 250, BETA rr 4t lc enduro
Reliable Performance from the Standard NGK Spark Plug on the Grom BBK
About quality and texture: I am happy with the quality of the CR8E standard spark plug from NGK, the properties of the standard NGK spark plug like copper cored center electrode ensure a reliable spark. About the feeling of use: The NGK CR8E spark plug is better suited to the Grom BBK then the original installed NGK CPR6EA-9, the cooler rating ensures a trouble free spark with the higher compression piston of the BBK. Products to buy together: NGK also offer high performance spark plug caps which would also be desirable to purchase alongside the NGK CR8E standard spark plug to remove any chance of the performance of the standard spark plug being decreased. Difficulty of installation: The process to install takes about 5 minutes. Firstly, check the spark plug gap and adjust if required, then simply remove and install the spark plug and refit the spark plug cap securely. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a quality standard spark plug at a great price that is more then suitable for the perforamce requirement of the Grom BBK when considering the additional cost and minimal performace advantage of the iridium spark plug. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: The original Honda spark plug heat rating is 6. Recommended heat rating for the stock engine is 6 or 7 and recommended heat rating for a big bore or high compression engines is 8 or 9. View detail
Fits: SUZUKI DR-Z400S, KAWASAKI KLX450R, KAWASAKI KX450F, KAWASAKI KX250F, KAWASAKI KX250, SUZUKI DR-Z250, KAWASAKI KX125, SUZUKI RMX450Z, SUZUKI RM125, SUZUKI RM250, YAMAHA WR400F, YAMAHA WR250F, YAMAHA WR250Z, YAMAHA YZ450F, YAMAHA YZ426F, YAMAHA YZ400F, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ125, HONDA CR250
I'm glad I can customize it to my liking.
Being able to customize it to my liking is a fun process to work with. I didn't feel the lightness, but it must be effective. w
Yellow color looks like Gold.
View detail
Fits: ADIVA N125, ADIVA R125, APRILIA Leonardo 125, APRILIA Leonardo 150, bimota Bellaire 600, KYMCO Racing 125, KYMCO Racing 150, MALAGUTI Madison 125, MALAGUTI Madison 150., PIAGGIO X9-200 Amalfi, SUZUKI Intruder LC125, YAMAHA FZS600 Fazer, YAMAHA WR400F, YAMAHA YZ400F, bimota YB-7 Folgore, APRILIA Scarabeo 125, APRILIA Scarabeo 150, BENELLI Velvet 125, BENELLI Velvet 250, BETA rr 4t lc enduro
The 8 heat rating spark plug works best with my modified engine setup
About quality and texture, I can confirm that the quality is great and that the materials used are a combinations of copper, porcelain and nickel alloy for the standard plugs from NGK. About the feeling of use, After 1000 kms of use with the previous 9 heat rating spark plug the bike would stall and be difficult to start in colder weather conditions. The 8 heat rating spark plug works best with my modified engine setup with no negative side effects. Products to buy together, To maximize the performance of your spark it would be ideal to also add an upgraded hyper ignition coil from Takegawa to your cart. Difficulty of installation, I can say the fitment of the spark plug for my installation was very easy due to the ease of access to the cylinder head and simple nature of the task. Cost performance and comparison with other products, The pricing of the product is great. You receive a spark plug made of quality materials from a well known brand. Pricing of stand spark plugs from other brands is similar where as iridium spark plugs are much more expensive. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA XR200R, HONDA XLR200R, YAMAHA YZ450FX, YAMAHA YZ450F, YAMAHA YZ426F, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA WR450F, YAMAHA WR426F, YAMAHA WR400F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250, YAMAHA WR250F, YAMAHA YZ400F, YAMAHA YZ400F
Forest Road Dentistry STENZ [Stenz]
I purchased this product to REPEAT what I currently have installed.
Chain and Driven Sprocket (ENG side) will be installed at the same time (front 14, rear 46)
Gold chain also eliminates friction loss and lasts longer.
The speed is stable and reasonable even at high speeds.
View detail
Fits: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400
Plug must be oriented 2ValveEngine required
Especially with 2Valve's sideways plug-in Engine, the Idol can be stabilized by centering the orientation of the Minus electrode.
The insulators will be beautifully burnt.
This plug is tightened 60 degrees after it hits according to NGK's instructions, so it is tightened for one side of the hexagon.
So, the four bottles purchased and used this time are Quantity:Only 2pcs were left.
It is a cheap item and I think this is about as good as it gets. The rest will be sold unused used.
This is loss-free.
The photo shows Marking in Pink color and the orientation of the electrode.
View detail
Fits: KAWASAKI Ninja 650R, KAWASAKI Ninja650, KAWASAKI Ninja 400, KAWASAKI Ninja 400R, KAWASAKI ER-4n, YAMAHA R1-Z, YAMAHA MT-25, YAMAHA MT-03, YAMAHA FZ400, SUZUKI WOLF250, SUZUKI V-STROM650, SUZUKI RGV250Γ SP, SUZUKI TEMPTER, SUZUKI SV650, SUZUKI SV650X, SUZUKI GSR400, SUZUKI SV400S, SUZUKI SV400, SUZUKI RGV250Γ SP2, SUZUKI GSR400
Expecting better fuel economy when touring!
My impression after installation is that there is little difference in fuel consumption, acceleration/deceleration, etc. in town.
I haven't gone on any long-distance Touring trips yet.
I am looking forward to seeing how much it will affect fuel economy when touring since it is now about 200 to 300 rpm lower in the same speed range as before.
View detail
Fits: YAMAHA WR250F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR400F-450F, YAMAHA WR450F, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ450F, YAMAHA YZ65, YAMAHA YZ85, YAMAHA YZ450FX, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA WR450F, YAMAHA WR400F-450F, YAMAHA WR400F
You can stand firm.
They are non-slip even when wet and allow me to step on them firmly so I can concentrate on running. View detail
Fits: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400
I just replaced the plug on my SV650!
The car has not yet been driven more than 1,000 miles since delivery, but I replaced it.
On the SV650, the replacement process is a hassle.
View detail
Fits: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400
That's good.
It's a different Motorcycle! Acceleration is good, Idling is stable. View detail
Fits: YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SR400, YAMAHA SR400, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES
New O-ring for crank case plug
The dreaded leak and this is why I decided to buy genuine as opposed to the aftermarket which often fail. The last one which has started leaking was an aftermarket one. Go figure.The part was super easy to find witht hte help of the tools available on Webike. The price was brilliant and even though it's only an o ring, would you really want to risk a pathetic aftermarket one which will bring your riding to a halt... no. So, this was also ordered aloong with a few other parts and the shipping was very good indeed. Arrived with me within a week of ordering all the parts needed.All packaged really well as expected and fitted within a coule of minutes. Very pleased with my purchase and from now on, I will ONLY buy genuine OEM for my baby.Great service Webike, thank you veyr much View detail
Fits: HUSABERG FE600e, HUSABERG FE501e, HUSABERG FE400e, HUSABERG FE600e, ADIVA N125, ADIVA R125, APRILIA SCARABEO125, APRILIA SCARABEO100150, APRILIA SCARABEO200, APRILIA LEONARDO125, APRILIA LEONARDO150, BENELLI VELVET125, BENELLI VELVET125250, BETA RR 4T LC ENDURO, BETA RR 4T LC MOTARD, bimota Bellaria600, CAGIVA V RAPTOR1000, CAGIVA V RAPTOR650, CAGIVA EXTRA RAPTOR1000, CAGIVA NAVIGATOR
Maybe it doesn't mean anything in particular...
I feel that the more solid the ignition is, the better the stalling and vibration, and the longer the service life (all of these things are true). I have a feeling." (Level)
Compared to the Standard Plug BP5HA, the price is 5~600 yen higher and more than twice as much, and yet the service life may be slightly longer. (Lol) 。
This may be one of the reasons why the old Motorcycle has almost one-shot startability in winter...
View detail
Fits: YAMAHA TENERE700, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR400F-450F, YAMAHA WR450F, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ400F, YAMAHA YZ400F-450F, YAMAHA YZ450F
Stabilizer
Buy Parenthesis good only
As a layman, I have no idea about its performance.
View detail
Fits: HUSABERG FE600e, HUSABERG FE501e, HUSABERG FE400e, HUSABERG FE600e, ADIVA N125, ADIVA R125, APRILIA SCARABEO125, APRILIA SCARABEO100150, APRILIA SCARABEO200, APRILIA LEONARDO125, APRILIA LEONARDO150, BENELLI VELVET125, BENELLI VELVET125250, BETA RR 4T LC ENDURO, BETA RR 4T LC MOTARD, bimota Bellaria600, CAGIVA V RAPTOR1000, CAGIVA V RAPTOR650, CAGIVA EXTRA RAPTOR1000, CAGIVA NAVIGATOR
GSX400 Plug replacement
I have been using the Meter for 20000 km and recently I felt that the starting performance was getting worse, so I replaced the plug.
Idling is stable even in recent cold weather with vigorous one-shot starting and a short warm-up time.
View detail
Fits: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400
NGK MOTODX
Replaced the plug from NGK Windshield IRIDIUM to MOTO DX. I don't know if it was too long since I replaced the plug, but I got the impression that the blow off was lighter. View detail