Reviews
Fits: SUZUKI GSX-S1000F, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1400, SUZUKI GSX1400, SUZUKI BANDIT1250, SUZUKI BANDIT1200, SUZUKI INAZUMA750, SUZUKI INAZUMA400, SUZUKI INAZUMA1200, SUZUKI SV650S, SUZUKI SV650S, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650, SUZUKI SV1000S, SUZUKI SV1000S, SUZUKI SV1000, SUZUKI SV1000
circumstances being favorable (advantageous)
There is no discomfort in the Large shape, and it is just the right Size.
Key insertion and removal is not smooth.
It seems a little tricky.
Maybe if you use it, it will work better.
View detail
Fits: APRILIA SHIVER 750, APRILIA SRV850, BMW C650 Sport, DUCATI MONSTER 1100, DUCATI MONSTER696, DUCATI MONSTER796, HONDA CBF1000, HONDA CBF500, HONDA CBF600 N, HONDA CBF600S, HONDA CBR600F, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA VFR1200F, HONDA VFR800, HONDA VFR800, HONDA VFR800F, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6n
Screw hole mismatch
It did not fit the fitting (bracket) slightly, so I had to modify it a little. If possible, it might be safer to have someone with knowledge or a store install it. View detail
Fits: YAMAHA MT-10, YAMAHA MT-10, SUZUKI SV650, SUZUKI SV650, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI Z250, KAWASAKI Z250, HONDA VFR800F, HONDA VFR800F, HONDA CBF1000, HONDA CBF1000, HONDA CB650F, HONDA CB750, YAMAHA XJ6DIVERSION, HONDA CB1300SUPER BOLDOR, HONDA CB500, HONDA CB1300SUPER BOLDOR
Touring and commuting.
The Helmet also has a quantity, depending on the shape.:1 Set of 2pcs
As for Waterproof, there was no flooding even after driving in a reasonable amount of rain.
I could easily fit a helmet, a jacket, and gloves in it, so I could easily fit a pair of shoes in the Pannier for a day trip up a mountain.
The price is moderate because a dedicated mounting base is required, but it is a reasonable price considering the convenience of this product.
View detail
Fits: YAMAHA XJ6DIVERSION, YAMAHA XJR1300, YAMAHA XJ600, YAMAHA XJR1200, BMW R1100R, SUZUKI BANDIT600 (GSF600), YAMAHA XJ6DIVERSIONF, BMW R1100S, YAMAHA XJ6DIVERSION, YAMAHA XJ6DIVERSION, YAMAHA XJ6DIVERSION, YAMAHA XJ6DIVERSION, YAMAHA MT-07, YAMAHA FZS1000 FAZER, YAMAHA XJ6DIVERSION, DUCATI MONSTER1100EVO, YAMAHA MT-03, YAMAHA MT-07, YAMAHA MT-10, YAMAHA MT-10
Rugged Trunk
I bought the GIVI Aluminum Mono Key tail box on webike. I have been paying attention to this tail box before. The domestic price is very expensive and I have not bought it. I saw the price on webike and placed an order. The workmanship of the tail box is still good, and the capacity is also good. big enough. Usually, you can put a helmet, car clothes and other items. If you have a demand for capacity, I recommend this one. Although it is relatively large, it can really hold it. -------------------------------------------------- -------- I bought the GIVI Aluminum Mono Key rear box I bought at Webike. I have been paying attention to this tail box before. The domestic price is very expensive. price is good on the Webike, the price is placed. big enough. Usually put a helmet and car jackets and other items can be put. If there is a demand for capacity, this one is more recommended. Powered by Google Translator View detail
Fits: YAMAHA TMAX500, KAWASAKI ZX-6R, HONDA VTR1000SP, HONDA VTR1000SP, HONDA CBR600F, HONDA CB1300SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA VTR1000FVTR1000F FIRESTORM, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA400R, KAWASAKI NINJA650R, KAWASAKI ZZR1100/ZX-11, SUZUKI RGV250 (Gamma), YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FZ6-S2FAZER, YAMAHA FZ1FAZER, YAMAHA FZS600FAZER, YAMAHA TMAX500
useful car cover
YAMAHA’s TMAX is relatively large. In addition, I installed a tail box. Many car covers on the market cannot be used. This YAMAHA car cover purchased from webike is specially made for medium and large vehicles. It is long enough and can completely cover it. The vehicle, plus the design of the drawstring at the opening, can be well fixed on the vehicle without being blown by the wind, and the fabric has an excellent waterproof effect. -------------------------------------------------- -------- Yamaha's Tmax is relatively large, coupled with the tail box, many hoods on the market cannot be used. The vehicle, the bundle rope design at the outside opening can be fixed well in the car that it will not be blown by the wind, and the waterproof effect of the fabric is outstanding. Powered by Google Translator View detail
Fits: YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300AS, YAMAHA FJR1300AS, YAMAHA FZ8, YAMAHA MT-07, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA YZF-R6, YAMAHA SCR950, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1
Easy to use original burglar alarm
My motorcycle is YAMAHA MT07. I often need to park the car on the side of the road. In order to prevent the car from being stolen, I need to install an alarm. I have seen other brands on other websites before, but most of them need to be broken. Or punch holes for the vehicle, I don't like this installation method, so I bought this original alarm on webike, non-destructive installation, the motorcycle has a reserved interface, just plug it in directly, the sensor has three The three induction modes can be adjusted, the vehicle shakes, and a loud alarm will sound. -------------------------------------------------- -------- My motorcycle is YAMAHA MT07. Because the bike is often parked on the side of the road. In order to prevent the vehicle from being theft, I need to install an alarm. I have seen other brands on other websites before, but most of them need to break the line. Or punching the vehicle, I don't like this way of installation, so I bought this original alarm on the webike, which is not damaged, and the motorcycle has a reserved interface. The sponsor mode can be adjusted, the vehicle shakes, and a loud alarm will be made. Powered by Google Translator View detail
Fits: YAMAHA TMAX500, KAWASAKI ZX-6R, HONDA VTR1000SP, HONDA VTR1000SP, HONDA CBR600F, HONDA CB1300SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA VTR1000FVTR1000F FIRESTORM, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA400R, KAWASAKI NINJA650R, KAWASAKI ZZR1100/ZX-11, SUZUKI RGV250 (Gamma), YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FZ6-S2FAZER, YAMAHA FZ1FAZER, YAMAHA FZS600FAZER, YAMAHA TMAX500
I'm soooo glad the front section is Blue!
Yamaha is the best for Oil and Body Cover! is my sentiment, and it applies to this product as well!
The front part is Blue, so it's easy to see when you put it on and it's Stress-free!
And the thickness of the Cover. Just right!!!!" The price is not so expensive, so it can be recommended to everyone.
I think it's a Body Cover! The string part at the bottom of the Cover is also very strong and easy to tie!
It's Recommendation!
View detail
Fits: APRILIA MANA850, APRILIA MANA850, APRILIA MANA850GT, APRILIA MANA850GT, APRILIA SHIVER 750, APRILIA SHIVER 750, APRILIA SHIVER 750, APRILIA SRV850, APRILIA SRV850, BMW C650 Sport, BMW C650 Sport, BMW F650 GS, BMW F650GS Dakar, BMW K1200GT, BMW K1200RS, BMW R1100R, BMW R1100S, BMW R1200R, BMW R1200R, BMW R1200R
Mono Key type security!
Installed on BURGMAN 400.
I don't do Tandem riding, so I think 40L capacity is enough for me. the OEM specified box is 47L Large type, but the price is also Big, so the price is also Big at Monokey.
I chose V40 because it is more affordable. monokeyCarrier, an option of SEA BASS, is made of steel and looks very strong.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI VN 2000 Vulcan models, KAWASAKI Z 1000 R, KAWASAKI Z 1000, KAWASAKI Z 1000, KAWASAKI Z 800, KAWASAKI Versys 1000, KAWASAKI Z 750 R, KAWASAKI Z 750, KAWASAKI Versys 650, KAWASAKI ER6F, KAWASAKI ER6N, KAWASAKI Ninja250, YAMAHA SEROW250, YAMAHA Midnight Star, YAMAHA XV 1900, YAMAHA V-Max, YAMAHA FJR 1300, YAMAHA YZF R1, YAMAHA Fazer FAZER
Is Large sturdy enough to install? ,.
I bought one with 1 pc. left in stock. Maybe it was an old one?
I opened the package and found that there are a lot of white dusts all around the Knob on the Setting side. I don't want the ECU to throw up a disconnection error if it's crushed or something, so I've sent an inquiry to the ECU to see if there's any problem using the Knob.
All ratings are in the middle because they have not been used yet.
View detail
Fits: APRILIA MANA850, APRILIA MANA850, APRILIA MANA850GT, APRILIA MANA850GT, APRILIA SHIVER 750, APRILIA SHIVER 750, APRILIA SHIVER 750, APRILIA SRV850, APRILIA SRV850, BMW C650 Sport, BMW C650 Sport, BMW F650 GS, BMW F650GS Dakar, BMW K1200GT, BMW K1200RS, BMW R1100R, BMW R1100S, BMW R1200R, BMW R1200R, BMW R1200R
Once you use it, you can't stop.
I had a lot of trouble with Monokey, Mono-lock, and capacity, but settled on MonokeyV40.
The deciding factors were the price, which is less than 20,000 yen for a Monokey, and the perfect large size.
In terms of capacity, there is a little room for a Helmet and Rain Coat.
As for the helmet, the X14 XL fits perfectly when placed horizontally, and the lid will close even when placed upright. (If you want to place it upright, change the orientation of the helmet.)
The Mirror position of the GSX1300R HAYABUSA is low and the box is rather high, so I was worried about the reflection on the Mirror, but the V40 is narrow and the edge of the box is only slightly visible.
I am not dissatisfied, but the box is attached to the rear side, so the overall length is longer, and I have to be careful when backing up.
Overall, we are very satisfied.
View detail
Fits: SUZUKI GSX1400, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX750F, SUZUKI GSX600, SUZUKI GSX600, SUZUKI GSX650F, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX750F, SUZUKI GSX650F, SUZUKI GSX1400, SUZUKI GSX750F, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSR750, SUZUKI GSX-S1000, SUZUKI GSR750, SUZUKI GSF1200S, SUZUKI GS500, SUZUKI GSF1200, KAWASAKI NINJA400R
Reliable construction
It is new from E52 after 11 years. The construction is solid and I have no worries, but the installation to Base is harder than the previous one, so I have to open the lid and push the inside bottom to install it. I am hoping that it will get used to it in the future. View detail
Fits: YAMAHA TDM900, YAMAHA TZR250R, YAMAHA YZF-R6, YAMAHA MT-10, YAMAHA FZ1 Feather, YAMAHA MT-10, YAMAHA TDM900, YAMAHA MT-10, YAMAHA TMAX530, YAMAHA TZR250, YAMAHA TZR250R, YAMAHA XJR1300, YAMAHA XSR700, YAMAHA TZR250, YAMAHA XSR700, YAMAHA XSR900, YAMAHA XSR900, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R1
It works very well.
[How is it used?
Long touring on highways and Winding at touring destinations.
Only a small amount of city driving is done.
Was the one you received as per Image?
The appearance of the Brake Pads was neither good nor bad, as shown in the Image.
Was the installation difficult?
It is not difficult, but it is an important safety part, so if you have any concerns about it, leave it to Motorcycle shop.
How was your experience with it?
It was as advertised by Manufacturer.
The MT-10 decelerates as much as you grip it, and the OEM had a situation with the MT-10 where you thought it wasn't working (like running on empty) when you did hard braking. (This is not the case with this product.
If you grip it, it only works as long as you grip it.
On the other hand, if the effect is too strong and I brake with the same sensation as before, my body will stumble and I will lose 15 to 20 km/h of the speed that I was trying to lose.
However, once you get used to it, there is no better way to slow down as you wish.
It can be used on public roads with little worry, with almost no effect on temperature or rain.
It seems to have good durability thanks to Ceramic.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
It's the price that is disappointing.
OEM +2000 yen is an expense... (And 2Quantity):(Set required)
[Notes]
The part number that fits my motorcycle was out of stock for a while, probably due to the Corona disaster.
However, even if the item is listed as out of stock, you may be able to purchase it by making an inquiry via the Inquiry Button.
[ITEMS TO BUY TOGETHER
Brake rotor should be new if possible.
[Opinions and requests to Manufacturer
Please bring back the TYPE-C. Thank you very much.
View detail
Fits: KAWASAKI GPZ1100, KAWASAKI ER-6n, KAWASAKI EX-4, KAWASAKI GPZ1000RX NINJA, KAWASAKI GPZ400, KAWASAKI GPZ750, KAWASAKI GPZ900R NINJA, KAWASAKI NINJA400R , KAWASAKI NINJA650 R, KAWASAKI W400, KAWASAKI W800, KAWASAKI Z1-R, KAWASAKI Z1, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 KZ, KAWASAKI Z1000 Air cooling, KAWASAKI Z2, KAWASAKI Z400, KAWASAKI Z750, KAWASAKI ZEPHYR1100
I like hard ones
The OEM grips on my HONDA SCOOPY110 are getting dirty and the insides are starting to wear out. So I installed this product. This product of Italian Domino brand looks mature and cool. When riding without gloves, I felt it was hard at first, but now it is familiar to my hand. With gloves on, this level of hardness is just right. View detail
Fits: YAMAHA MT-10, YAMAHA MT-10, SUZUKI SV650, SUZUKI SV650, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI Z250, KAWASAKI Z250, HONDA VFR800F, HONDA VFR800F, SUZUKI BANDIT600S (GSF600S), HONDA CBF500, YAMAHA FAZER8, HONDA CBF1000, HONDA CBF1000, HONDA CB1300SUPER BOLDOR, HONDA CB750, HONDA CBF1000
Matching like an OEM
Installed on HondaFORZA250.
I like the color and appearance of the MATCH as if it were OEM.
It is reliable with no vibration etc. when running.
IMPRESSION DETAILS
0Base (sold separately)
We wanted to keep the height as low as possible, so we installed the Universal type Monokey base on the FORZAOEM Carrier, and it was installed as low as we wanted it to be.
I have not been able to find a Universal type Monokey base from Daytona. Webig does not sell them, but GIVI does, so I looked elsewhere.
I did not need a bracket in two places, and in the other two places, I connected the bracket with a slight slant.
Since the Monokey base is large, the Bolt connection with the Carrier was made as wide as possible to ensure good balance.
The Bolt threads do not reach the Nut loosening stop due to the lack of length of the Bolt in this diagonal section. (Bolt will be replaced again).
0Stop lamp (sold separately)
https://www.webike.net/sd/21113309/
Please check out our impressions on ↑ as well.
I think a retrofit Tail lamp is necessary because of the proximity of the Carrier and Box to the Stop lamp.
0BOXBody
The storage is not so good due to the many irregularities inside.
I have a 2mm thick non-slip Matte from 100s on the bottom of the box. I think that's why ↓
I have a GT-Air2 and NeoTEC2 from SHOEI and the lid does not close. (Please check by yourself).
I am thinking that I could have bought a 1Size larger one, though I might be able to store two helmets if I pushed myself. I am also thinking that it would have been better to buy one size larger.
I like the balance of the appearance, including the large size.
I use it in the summer, but I have to be careful when putting food in it because it gets hotter than expected.
that's all
View detail
Fits: APRILIA SHIVER 750, APRILIA SRV850, BMW C650 Sport, DUCATI MONSTER 1100, DUCATI MONSTER696, DUCATI MONSTER796, HONDA CBF1000, HONDA CBF500, HONDA CBF600 N, HONDA CBF600S, HONDA CBR600F, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA VFR1200F, HONDA VFR800, HONDA VFR800, HONDA VFR800F, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6n
Made by GIVI for peace of mind.
Used on CB400, HORNET and PCX.
I laughed here because of the design of the look of the Top case when it is removed.
Personally, I think Parenthesis is good.
It is more expensive than other cheaper products, but it is robustly built.
As a base, it has many holes and cavities, so it can be universally installed depending on the device.
If you are interested in installing a Large-format Case and also care about its appearance, this is a product that we recommend.
View detail
Fits: YAMAHA MT-07, HONDA NC750X, YAMAHA MT-07 TRACER, HONDA NC750S, YAMAHA FZS600FAZER, YAMAHA MT-03, YAMAHA MT-03, YAMAHA MT-03, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZ6-SFAZER, YAMAHA FZ6-SFAZER, YAMAHA FZ6-S2FAZER, YAMAHA FZ6-S2, YAMAHA FZ6-S2, YAMAHA FZ6-S2FAZER
I was finally able to purchase it after saving up my Gold.
The Dolomites were better suited for my use in terms of capacity and weight. View detail
It cmUP(s) pure twist 5 and appearance is also good. However, it is necessary to return pure at the time of an automobile inspection.
It cmUP(s) pure twist 5 and appearance is also good.
However, it is necessary to return pure at the time of an automobile inspection.
View detail
Fits: YAMAHA FZ6 S2 ABS, YAMAHA FZ6 S2 ABS, YAMAHA FZ6 S2, YAMAHA FZ6 Fazer-S2 ABS, YAMAHA FZ6 Fazer-S2, YAMAHA FZ10, YAMAHA FZ1, YAMAHA FZS1000, YAMAHA FZR600 Fazer, YAMAHA FZR400RR, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ6SHG, YAMAHA MT-09, YAMAHA MT-07A ABS, YAMAHA MT-07, YAMAHA MT-01
It's an easy to use Pad!
I use it with brembo radipon and OEMCaliper.
It is easy to use from city driving to mountain passes, as it feels like it has a firm grip without being severe. 。 Circuit doesn't run, so I don't know.
This Pad is great! It's my ideal Brake effect!
View detail
Fits: APRILIA MANA850, APRILIA MANA850, APRILIA MANA850GT, APRILIA MANA850GT, APRILIA SHIVER 750, APRILIA SHIVER 750, APRILIA SHIVER 750, APRILIA SRV850, APRILIA SRV850, BMW C650 Sport, BMW C650 Sport, BMW F650 GS, BMW F650GS Dakar, BMW K1200GT, BMW K1200RS, BMW R1100R, BMW R1100S, BMW R1200R, BMW R1200R, BMW R1200R
Helmet storage
[How is it used?
Touring and shopping
Was the one you received as per Image?
It was bigger than expected.
How was your experience with it?
It is easy to use because of its capacity.
[Points to note]
I guess the important thing to note is not to leave the key inserted.
How did it compare to other products?
We compared with other companies, but we decided to go with GIVI.
Other items that would be helpful
Point or hang for mounting/There is no hang as it is mounted on a dedicated Base. Maybe Items/Base or Frame that should be purchased together.
Opinions and requests to Manufacturer A little cheaper.
View detail
Fits: KAWASAKI GPZ1100, KAWASAKI ER-6n, KAWASAKI EX-4, KAWASAKI GPZ1000RX NINJA, KAWASAKI GPZ400, KAWASAKI GPZ750, KAWASAKI GPZ900R NINJA, KAWASAKI NINJA400R , KAWASAKI NINJA650 R, KAWASAKI W400, KAWASAKI W800, KAWASAKI Z1-R, KAWASAKI Z1, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 KZ, KAWASAKI Z1000 Air cooling, KAWASAKI Z2, KAWASAKI Z400, KAWASAKI Z750, KAWASAKI ZEPHYR1100
Happy!
The SR OEMGrip makes my hands sore and the throttle slippery after long rides.
I thought it might be vibration, but I also wondered if the Large size of my hand and the thickness of the Grip did not match and decided to replace it.
I was concerned about the NORMAL look, so I decided on this product with Closed End. As a result, I am satisfied with the Large size. I also added vibration suppression, so long-distance touring is now more enjoyable!
However, there was a little BALI, so one star is Minus.
View detail