Reviews
Fits: HONDA AX-1, HONDA CB-1, HONDA CB600F, HONDA CB750F, HONDA CBR1000F, HONDA CBR1100XX Super Blackbird, HONDA CBR250R (2011-), HONDA CBR250R (MC17/19), HONDA CBR250R (MC17/19), HONDA CBR400R, HONDA CBR400R, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
Corrosion protection only
I've been sticking with the Tokico 6 pods. This time I adopted CaliperOverhaul and baked paint instead of OEM. I think it's a good corrosion protection. I've heard that some people use seal tape to prevent leaks, but I don't use seal tape because I have to loosen the Breeder repeatedly to keep the air out. I've had OEM jams in the past, but I'm not sure if it's because of the stainless steel. I'll have to wait and see. View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200/R, YAMAHA XJ600, YAMAHA VMAX, YAMAHA VMAX, YAMAHA TT600R, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA SZR660, YAMAHA TDM850, YAMAHA STRATOLINER DELUXE, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400, YAMAHA GTS1000/A, YAMAHA GRIZZLY660, YAMAHA FZX750, YAMAHA FZ750, YAMAHA FZR750
Use with Ootani Coil
[How is it used?
Model used:FTR223
Applications:Street riding, Touring, Circuit
Period of use:About 3 years or so
Number of bottles used:About 4 Repeat purchases
Was the one you received as per Image?
As you can see in the image, the electrode is thicker than the one made by Denso, so I felt I could use it with the Votani Coil.
Was the installation difficult?
As long as you have a plug wrench, you should be able to do it without any problem if you are careful about the angle when tightening. There was no need to remove the tank.
How was your experience with it?
As mentioned in the Title, I will describe my impressions of using it with the Uotani Coil.
First of all, I was able to run with no trouble with the Utani Coil for the duration of its use. The electrode melted and I could not run. This was not the case.
The Iridium plugs themselves are good, as they are used in conjunction with the Utani Coil, but the start-up was very good, and the torque feeling was Large.
The Iridium plugs were excellent in terms of starting and torque, but once the electrodes got dirty from getting covered up, starting became extremely difficult, so I think the Standard Plug BP5HA would be a better choice for car bodies that use Watani Coil and tend to get covered up.
The Life had been replaced with a new one between 5,000km and 6,000km, as the Torque feeling changes after about 5,000km.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
Anti-seizure agent on the screw part of the Plug (Anti-seeds、CopperCompoundetc.) can be applied to prevent it from becoming a Trouble the next time it is replaced.
I've been doing it that way for more than a decade, and I've never had a problem with the plug burning off.
Also, it's not enough to tighten the plug as hard as you can, so read the product description carefully and do the work.
View detail
Fits: YAMAHA Zeal, YAMAHA YZF750SP, YAMAHA YZF750R, YAMAHA YZF600R Thundercat, YAMAHA YZF-R7, YAMAHA YZF1000R ThunderAce, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XSR700, YAMAHA XJR400R2, YAMAHA XJR400R
I want to know what the limit is.
How far can we use it?
I want to know the wear limit value.
It was rattling, but I could use it if I wanted to.
If you say it's a life-saving part, I'll replace it as soon as possible.
I would like to see a quantitative display.
View detail
Fits: HONDA VFR1200F, HONDA XR250, KAWASAKI D tracker, KAWASAKI 1400GTR, KAWASAKI KDX250R (for competition), KAWASAKI KDX250SR, KAWASAKI KLX250, SUZUKI GSX-R1100, SUZUKI GSX-R1100, SUZUKI TL1000R, YAMAHA TDM900, SUZUKI TL1000S, YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA V-MAX 1200, KAWASAKI ZRX1200, KAWASAKI ZZR1100/ZX-11, SUZUKI GSX-R1000
Green Light for differentiation
You can feel how smooth it is when you put it together.
As well as the function, the look of Parenthesis is nice.
Green Light will look great.
View detail
Fits: YAMAHA FZ1, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, HONDA CB1300 SF, HONDA CB400SF, HONDA CRF250L, HONDA CRF250M, HONDA MAGNA(V-TWIN MAGNA), HONDA X4, KAWASAKI D Tracker, KAWASAKI KDX125/SR, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI SUPER SHERPA, KAWASAKI ZEPHYRX, KTM 690DUKE, KTM 690DUKE R, KTM 990SUPER DUKE, KTM 990SUPER DUKE R
It's good.
I keep mine in the garage, but I bought it to keep the cobwebs away.
In the case of the SEROW 250, the hems of the front and rear Center sections reach the ground.
It would be great if the height could be adjusted with Velcro tape.
View detail
Fits: YAMAHA FAZER8, YAMAHA FZ8S, YAMAHA MT-07, YAMAHA MT-09 TRACER GT, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA TDM900, YAMAHA XSR700, YAMAHA XSR900, YAMAHA YZF-R1, YAMAHA YZF-R1M
You can't go wrong with SUNSTAR!
[How is it used?
YZF-R1 (2CR) I decided to change to Other Brand Product along with Rear Sprocket because the OEMSprocket of
Since the rear sprocket is SUNSTAR, the front side is also SUNSTAR.
Was the one you received as per Image?
Unlike the OEM, there is no rubber or plastic guide. This is the type without guide.
As expected, the weight difference between the OEM and the front sprocket is not that much, and the OEM is light enough.
I chose the same 525 Size 16T as the OEM.
[Was it difficult to install?
YZF-R1 (2CR) can be replaced as soon as the Nut claw is raised.
However, Nut is quite torquey, so you need to turn it with all your might while stepping on the rear brake.
The accuracy of the installation on the shaft was perfect. There is no rattle at all.
I also replaced the Nut with a new one. (Part number:90179-22018×1pc.) The price was 572 as of February 2022.
How was your experience with it?
I drove around town after the replacement, but I couldn't really tell much.
I also cleaned the chain after replacing the Sprocket, so it runs very smooth, but I don't know if it's because of this product. LOL!
【Review】
I don't know if it's because of this product or not, but it runs very smooth!
I do have some concerns about durability, but I'm hopeful!
View detail
Fits: YAMAHA XV750E, YAMAHA VIRAGO750 XV750, YAMAHA XVVIRAGO400, YAMAHA XVVIRAGO400, YAMAHA VIRAGO1100 XV1100S, YAMAHA XV250 S, YAMAHA XV250, YAMAHA TRX850, YAMAHA VSTARclassicI1, YAMAHA VIRAGO1100 XV1100, YAMAHA TDM850, YAMAHA TDM900 A, YAMAHA TDM900, YAMAHA SRX600, YAMAHA TDM850, YAMAHA TDM850, YAMAHA SRV250, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRV250 RENAISSA
To change the oil.
I bought this one because it is a cheaper replacement than OEM.
It's nice to be able to change it easily while changing Oil.
Note that the O-ring is not included.
I was able to use it without any problems.
If you want to do it cheaply, I recommend it.
View detail
Fits: YAMAHA XV750E, YAMAHA VIRAGO750 XV750, YAMAHA XVVIRAGO400, YAMAHA XVVIRAGO400, YAMAHA VIRAGO1100 XV1100S, YAMAHA XV250 S, YAMAHA XV250, YAMAHA TRX850, YAMAHA VSTARclassicI1, YAMAHA VIRAGO1100 XV1100, YAMAHA TDM850, YAMAHA TDM900 A, YAMAHA TDM900, YAMAHA SRX600, YAMAHA TDM850, YAMAHA TDM850, YAMAHA SRV250, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRV250 RENAISSA
To ZrX1200DAEG
Purchased to replace Filter on ZrX1200DAEG
It's cheaper than buying OEM, so I'll be using it for a while.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSR400, SUZUKI B-KING, Others Moto master, Others Beringer, Others brembo, Others brembo, Others brembo, Others SUNSTAR, Others Breaking, YAMAHA YZF-R3, YAMAHA MT03, HONDA CBR500R, YAMAHA Zeal
floater
The rotor was left as OEM, but the floater was changed to a flashy Anodized Color one.
This is an effective way to increase the custom look and feel.
View detail
Fits: KAWASAKI ELIMINATOR 250V, KAWASAKI EN400 TWIN, KAWASAKI ELIMINATOR 750, KAWASAKI ELIMINATOR 900, KAWASAKI 1400GTR, KAWASAKI 1400GTR, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman SS, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman SS, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI BURGMAN400, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI XF650 FREEWIND, SUZUKI DL650 V-STROM XT
Cospa best
[How is it used?
I bought this product because I moved into a great house where I could leave my Motorcycle all I wanted in the back, and I immediately added more Motorcycles.
I bought another Size last year, but it was well made for the price and still hasn't torn, so I bought a Repeat.
Was the one you received as per Image?
It is as per Image. And I'm using it.
Was the installation difficult?
It's a little hard to tell the front from the back (the front side of the chain hole is Red), but you just put it on your motorcycle, pull the drawstring on the rear, and attach the center belt to prevent wind flying.
How was your experience with it?
Not too bad, not too bad. I don't ask for much because of the price. It's enough to prevent theft.
[Included Parts:were they on?
It comes with an insulated Seat that can be applied to high temperature areas.
You can cut the size to fit your motorcycle and hang it inside.
I don't put it on because I put it on after it cools & it's a pain in the ass.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
As the description notes, it is a bit Tight, so you may want to use a One sizeLarge threshold size than your Motorcycle.
View detail
Fits: KAWASAKI ELIMINATOR 250V, KAWASAKI EN400 TWIN, KAWASAKI ELIMINATOR 750, KAWASAKI ELIMINATOR 900, KAWASAKI 1400GTR, KAWASAKI 1400GTR, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman SS, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman SS, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI BURGMAN400, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI XF650 FREEWIND, SUZUKI DL650 V-STROM XT
Motorcycle Cover
[How is it used?
Used under a carport
Was the one you received as per Image?
It was everything I thought it would be.
How was your experience with it?
I haven't had many rainy days since I bought it.
I don't think the rain protection will be a problem.
Prevention of Dust etc. is not a problem.
Black, so it won't stand out in the dark of night.
[Points to note]
It is the heat shield Seat of the attached Exhaust System.
I'm going to paste it myself, so I'm going to make sure the Cover is in place.
We need to stretch him out.
Cover will be WrinkleWrinkle
How did it compare to other products?
The price is good and cheap.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA FAZER8, YAMAHA FZ8S, YAMAHA MT-07, YAMAHA MT-09 TRACER GT, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA TDM900, YAMAHA XSR700, YAMAHA XSR900, YAMAHA YZF-R1, YAMAHA YZF-R1M
It's nice to be used for something like this.
As soon as the rear sprocket arrives, it will be replaced at the motorcycle shop, so I can't write any impressions of the bike yet, but part of the proceeds will be donated to Gold. View detail
Fits: HONDA VFR1200F, HONDA XR250, KAWASAKI D tracker, KAWASAKI 1400GTR, KAWASAKI KDX250R (for competition), KAWASAKI KDX250SR, KAWASAKI KLX250, SUZUKI GSX-R1100, SUZUKI GSX-R1100, SUZUKI TL1000R, YAMAHA TDM900, SUZUKI TL1000S, YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA V-MAX 1200, KAWASAKI ZRX1200, KAWASAKI ZZR1100/ZX-11, SUZUKI GSX-R1000
I've been using it for about 4 years and so far no leaks.
I use it on my GSX1300R HAYABUSA.
I did not install it as a Single Item, but when I sent it to Technics for a suspension overhaul, I was able to choose it as an Option, so I put it in as a trial.
It seems that the improvement in operability and durability by low friction are the main points.
As for the operativity, I was not able to feel it with my sensitivity, but the durability seems to be functioning to a certain extent because Oil blot is not seen even now when four years have passed.
However, this seal has a structure that the Dust Seal is held by the Spring, so it is very thick and looks strong against cracking.
You can also choose between Green and Black.
I chose Green to give it a custom look, but it was a dark Green color instead of a good Green with a custom look.
Basically, I don't think it's necessary to put this on, but I think it's worth a try if you have a motorcycle with a pre-existing condition where the fork pees.
The price is reasonable if you look at the Single Body, but if you think about the difference between the OEM Parts and …?
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB600F, HONDA CB750F, HONDA CBR1000F, HONDA CBR1100XX Super Blackbird, HONDA CBR250R (2011-), HONDA CBR250R (MC17/19), HONDA CBR250R (MC17/19), HONDA CBR400R, HONDA CBR400R, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
It's safer to change it.
The OEM Bleeder Bolt is always going to Rust and Decay, so this Material:It is safer to replace it with Stainless Steel.
Be sure to bleed the air and refill the fluid in the MASTER after replacement.
The Bleeder Cap was made by Straight.
View detail
Fits: KAWASAKI GPZ1000RX, YAMAHA VIRAGO1100, YAMAHA XS-1, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XT125, YAMAHA XS650, YAMAHA XS250, YAMAHA XT250, YAMAHA XT250, YAMAHA XT200, YAMAHA SEROW225, YAMAHA XT500, YAMAHA XT250X, YAMAHA XT400, YAMAHA YB125, YAMAHA XT600Z TENERE, YAMAHA YB-1, YAMAHA YD250, YAMAHA YBR125
It's been about a year since I bought it, and it's good, no deformation!
[How is it used?
Was the one you received as per Image?
It was exactly as I saw it!
Was the installation difficult?
It is easy because it is simpleParts.
How was your experience with it?
I am using it without feeling any discomfort.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather
Easy to use
Although it is not published in the conformity MODEL of the product Page, it is possible to install it without a problem also in 2003 type FZS600.
I used it to mount my GIVI Tank Bag ST602.
[How is it used?
I usually leave it attached to the Tank when not touring, but there is no inconvenience.
Was the one you received as per Image?
It was as Image in the picture.
Was the installation difficult?
The instructions are large sketchy, but there are only a few parts, so it was easy.
How was your experience with it?
It's so convenient! I can't imagine Touring without it!
[Included Parts:were they on?
It comes with 3 Screws and 3 collars (Sleeves).
[Was there anything that disappointed you?
Wouldn't it be better if the price was a little lower, Manufacturer?
View detail
Fits: その他 , HONDA XL250, HONDA XL230, HONDA XL200, HONDA TLM220, HONDA TLM200, HONDA SL230, HONDA MTX250, HONDA Elsinore 250, HONDA FTR250, HONDA CTX200, HONDA CRM250 AR, HONDA CRM250 R, HONDA CRF250L, HONDA CL72, HONDA CL175., HONDA AX-1, YAMAHA DT200 WR, YAMAHA DT200 R, YAMAHA DT-1
Numbness in the fingertips
It is a former mechanic, and I installed it carefully while considering the position of the Waffle on the back side. However, I noticed that the thumb of the left hand had become numb by the vibration when I ran 80km on the mountain road by touring (was there also some cold?). I'm not sure if it was cold or not.
Even though it is an off-road motorcycle, it is relatively new (WR250R/2015) I've never had such a problem with OEM grips before. If you look closely, you'll see that the OEM grip has a waffle finish up to the thumb area, but the domino grip is made similarly but without the waffle finish. The grip is a little thicker than the OEM grip.
And I felt a bit of numbness in the fingertips of my Right hand. (5BE-26240-00) I think that the grid size of Waffle is Smaller in the case of the "Mere Old Man", so that the fingertips are less likely to become numb.
P.S.
After that, I still don't get numb with OEMGrip anymore.
View detail
Fits: その他 , HONDA XL250, HONDA XL230, HONDA XL200, HONDA TLM220, HONDA TLM200, HONDA SL230, HONDA MTX250, HONDA Elsinore 250, HONDA FTR250, HONDA CTX200, HONDA CRM250 AR, HONDA CRM250 R, HONDA CRF250L, HONDA CL72, HONDA CL175., HONDA AX-1, YAMAHA DT200 WR, YAMAHA DT200 R, YAMAHA DT-1
Numbness in the fingertips
It is ex-Mechanic, and I installed it carefully while considering the Waffle position of the back side.
But after 80 miles of touring, I noticed that my left thumb had gone numb from the vibration.
Even though it is an off-road motorcycle, it is relatively new (2015) This has never been the case with OEM grips.
If you look closely, you'll see that the OEMGrip has a Waffle process that extends all the way to the thumb area, but
The grip of this domino is made close, but the Waffle processing does not extend that far.
Also, the grip felt slightly thicker than OEM.
And I felt a bit of numbness in the fingertips of my Right hand.
OEM (5BE-26240-00) I think that the grid size of Waffle is Smaller in the case of the "Mere Old Man", so that the fingertips are less likely to become numb.
View detail
Fits: SUZUKI SV650, YAMAHA Dragster 400 Classic, YAMAHA Dragster 1100 Classic, YAMAHA warrior, YAMAHA Dragster 250, KAWASAKI Z1000, KAWASAKI ZR-7/S, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI Eliminator 125, KAWASAKI Eliminator 250, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 400, KAWASAKI Zephyr 750, KAWASAKI Vulcan 1500, KAWASAKI Vulcan 400, KAWASAKI Vulcan 800, MV AGUSTA F4-BRUTALE, SUZUKI gsx1100s katana (sword), SUZUKI GSX1400
scratch-resistant
I used it to prevent scratching when storing my Motorcycle outdoors. The texture of the article is good and the function is good. Quantity for indoor storage:I thought it would be good to use 1pc. View detail
Fits: YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ6 FAZER, YAMAHA FZ6, YAMAHA FZ8 FAZER, YAMAHA FZ8, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA NIKENGT, YAMAHA TDM900, YAMAHA XJ6, YAMAHA XJR1300C, YAMAHA XSR900, YAMAHA XT660Z TENERE, YAMAHA FZ6R, YAMAHA MT-07, YAMAHA FZ-09, YAMAHA FZ-07
It's still a little short.
If you are replacing the OEM lever with the Clutch, it is still a bit short, but I prefer to grip the end of the lever with two fingers and operate it lightly using the lever principle, so the round part at the end of the lever was in the way. View detail