Reviews
Fits: YAMAHA FJR1300, SUZUKI BANDIT1250F, YAMAHA BOLT, SUZUKI DL1000 V-STROM1000, SUZUKI BANDIT1250, SUZUKI TL1000S, SUZUKI TL1000R, SUZUKI KATANA(KATANA), SUZUKI KATANA(KATANA), SUZUKI HAYABUSA, SUZUKI HAYABUSA, SUZUKI GSX1400, SUZUKI GSX-S1000F, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600
One point of the foot
The floater of the STD disc is almost fixed and does not move, but after the replacement, it will move laterally and follow the brake pads better. To replace the floater, remove the disc and remove the crimp from the reverse side of the floater with a sander. View detail
Fits: YAMAHA TDM900, YAMAHA TZR250R, YAMAHA YZF-R6, YAMAHA MT-10, YAMAHA FZ1 Feather, YAMAHA MT-10, YAMAHA TDM900, YAMAHA MT-10, YAMAHA TMAX530, YAMAHA TZR250, YAMAHA TZR250R, YAMAHA XJR1300, YAMAHA XSR700, YAMAHA TZR250, YAMAHA XSR700, YAMAHA XSR900, YAMAHA XSR900, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R1
It works amazingly well and is controllable.
I'm using it on my Yamaha MT-01. I replaced the NORMALPad with an external brake rotor (Wave Disc) at the same time, so I haven't been able to compare the exact fee ring change. However, it is certain that it works very well. It works very hard. However, it is not so extreme that it locks up, and is quite controllable. After the bite comes out, it works so well that I was confused by the excessive deceleration at first. Of course, I didn't feel any shortage in OEM, but it is more than that.
The good thing is that the disc rotor of the NORMAL was shaved and had uneven surface after 20,000km, but the new rotor of the ZICOO was not shaved in any strange way.
View detail
Fits: YAMAHA FZ1, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, HONDA CB1300 SF, HONDA CB400SF, HONDA CRF250L, HONDA CRF250M, HONDA MAGNA(V-TWIN MAGNA), HONDA X4, KAWASAKI D Tracker, KAWASAKI KDX125/SR, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI SUPER SHERPA, KAWASAKI ZEPHYRX, KTM 690DUKE, KTM 690DUKE R, KTM 990SUPER DUKE, KTM 990SUPER DUKE R
I like the size and lightness of it!
I used Cover of Black color, but Black color came to stick to Motorcycle whether it deteriorated with age, and I replaced it.
It's lighter than the old one and the Blue line makes it easy to see the front and back. There is a rope around the bottom of the bike so that you can squeeze it in front and back. Therefore, if the size is wrong, the squeezing function will not work.
SEROW is just right for 2L.
View detail
Fits: SUZUKI Gladius 400, SUZUKI Impulse 400, TRIUMPH SPEED TRIPLE, YAMAHA SR400, YAMAHA SR500, YAMAHA FZ1, HONDA CB500X, HONDA CB500F, HONDA Hornet 600, HONDA CB750, HONDA CB400SS, HONDA CB400 SUPER FOUR, HONDA CB1300 Super Four, HONDA CB1000R, BMW R1200R, BMW F800R, DUCATI monster, KAWASAKI ZRX II, KAWASAKI Z750, KAWASAKI Z1000
Reliability that I use all the time.
A little pricey, but the texture and feel is excellent! View detail
Fits: YAMAHA SR250(ALL MODEL), YAMAHA SR125(ALL MODEL), YAMAHA SR400(ALL MODEL), YAMAHA TW200(ALL MODEL), YAMAHA TW125(ALL MODEL), YAMAHA TT250R Raid(ALL MODEL), YAMAHA TT-R250(ALL MODEL), YAMAHA TDR50(ALL MODEL), YAMAHA TDR250(ALL MODEL), YAMAHA TDR125(ALL MODEL), YAMAHA TDM900(ALL MODEL), YAMAHA TDM850(ALL MODEL), YAMAHA SRX250(ALL MODEL), YAMAHA SRV250(ALL MODEL), YAMAHA TW200E(ALL MODEL), YAMAHA TW225(ALL MODEL), YAMAHA TZr250R(ALL MODEL), YAMAHA VINO(ALL MODEL), YAMAHA WR250R(ALL MODEL), YAMAHA VOX(ALL MODEL)
It's a little hard.
The texture was good and the grip felt good, but...
I'll preface this by saying it's not bad. However, because my hand is a little small, Lever operation became distant and there was a sense of discomfort.
Also, it's harder than the Pro grip I've been using, so my palm hurts when I use it for a long time.
I'm an old man now, so if you're a young man with relatively big hands, you might have no complaints about this product. (Lol)
View detail
Fits: KAWASAKI ELIMINATOR 250V, KAWASAKI ELIMINATOR 250, KAWASAKI ELIMINATOR 400, KAWASAKI ELIMINATOR 400SE, KAWASAKI ELIMINATOR 400LX, KAWASAKI ELIMINATOR 400, KAWASAKI EN400 TWIN, KAWASAKI ELIMINATOR 750, KAWASAKI ELIMINATOR 900, KAWASAKI 1400GTR, SUZUKI DL650 V-STROM, SUZUKI V-STROM1000, SUZUKI V-STROM1000, SUZUKI V-STROM1050, SUZUKI V-STROM1050XT, YAMAHA DSC400, YAMAHA DS400, YAMAHA TDM900A, YAMAHA TDM900, YAMAHA DSC1100
For outdoor storage
[How is it used?
outdoors
Was the one you received as per Image?
Street Image
How was your experience with it?
It's easy to put on and provides plenty of protection from the sun, rain and wind.
I bought it to protect my shadow400 from theft and to store it outdoors. The Ventilation function works well and I feel it is durable enough even though I have not used it long enough.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200/R, YAMAHA XJ600, YAMAHA VMAX, YAMAHA VMAX, YAMAHA TT600R, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA SZR660, YAMAHA TDM850, YAMAHA STRATOLINER DELUXE, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400, YAMAHA GTS1000/A, YAMAHA GRIZZLY660, YAMAHA FZX750, YAMAHA FZ750, YAMAHA FZR750
If you want to replace the plug, this is the one.
I always change the plug at about 3000k, but this Iridium plugs makes less ignition error, and when I change the oil at the same time, the engine sound becomes stable and a little quiet. View detail
Fits: YAMAHA Dragster 250, YAMAHA TDM850, YAMAHA TDM850, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900
It doesn't have an O-ring.
The O-ring that attaches to the lid was not attached.
Next time I'll buy a non-OEM conscientious Oil Filter.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), KAWASAKI ZZR1100/ZX-11, HONDA XR250, HONDA VFR1200F, KAWASAKI 1400GTR, HONDA XR250MOTARD, KAWASAKI D Tracker, KAWASAKI D-TRACKER-X, KAWASAKI KDX250R (for competition), KAWASAKI KDX250SR, KAWASAKI KLX250SR, KAWASAKI KLX250R (for competition), KAWASAKI ZX-14R, KAWASAKI KLX300R, KAWASAKI KX125, KAWASAKI ZRX1100, SUZUKI GSR600, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZrX1200ZrX1200 DAEG
Leaking & hellip;?
I've used it a few times now and it leaked right away last time.
Specifically, the Inner Tube was fine right after the replacement, but on my first 200km touring trip home after the replacement, the Inner Tube was sticky on one side.
I've seen a lot of comments on the net about leaks, but I thought it must be a faulty assembly, but I never thought it would leak on me…
I took it to a motorcycle shop (an authorized dealer) because I didn't have any tools for some reason, but they told me that they don't use them because they might leak soon.
(However, this is not the response of the store Level, but the judgment of a Mechanic who personally experienced a leak on his own motorcycle.
It's true that the friction is lowered when you look at the Single Item, but it's not at a level that you can tell by actual driving, so there is no repeat.
Just absolutely bad! It's not so bad that I can say for sure that it's bad, but it's just an impression to avoid just in case, so I gave it an intermediate rating.
If it doesn't leak, I myself have a track record of not leaking at all (used it a few times in the past, no problems at all), so it's a difficult product to judge…
If it were at least cheaper, I might try it in the future for verification, but it's expensive…
View detail
Fits: YAMAHA FZ1, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, HONDA CB1300 SF, HONDA CB400SF, HONDA CRF250L, HONDA CRF250M, HONDA MAGNA(V-TWIN MAGNA), HONDA X4, KAWASAKI D Tracker, KAWASAKI KDX125/SR, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI SUPER SHERPA, KAWASAKI ZEPHYRX, KTM 690DUKE, KTM 690DUKE R, KTM 990SUPER DUKE, KTM 990SUPER DUKE R
It lasted five years.
I think I used it for over 5 years and it finally tore.
It lasts a long time and I have no complaints, so I bought the same product. All the Motorcycle Covers I use are now Yamaha's.
This time I bought it again for Motocrosser, and it is a car without Mirror, but there is nothing to be concerned about the size etc.
View detail
Fits: APRILIA RSV4 R FACTORY, APRILIA RSV4 R APRC, APRILIA RSV4 R, KAWASAKI Z1000, KAWASAKI VERSYS 1000 SE, KAWASAKI Ninja1000SX, KAWASAKI Ninja H2, SUZUKI V-STROM650XT, SUZUKI V-STROM650, SUZUKI V-STROM1050XT, SUZUKI V-STROM1050, SUZUKI KATANA, HONDA VFR400Z, HONDA VFR400R, HONDA STEED400 VSE, HONDA STEED400 VLX, HONDA STEED400 VCL, HONDA SHADOW600, HONDA CBR1000RR-R FIREBRADE SP, HONDA CBR1000RR-R FIREBRADE
Reasonable price, authentic DID
I can’t find this accessory around, all of which are only buckle type, no rivet type. I didn’t expect to find it on the webike. The price is very reasonable and the freight is cheap. It just works when installed, and it is suitable for the chain of DID525ZVM-X-- -------------------------------------------- I can't find this accessory around, I only have a buckle, there is no rivet type, I can't think of it in Webike, the price is still very reasonable, the freight is also cheap, it is just the use of DID525ZVM-X Powered by Google Translator View detail
Fits: KAWASAKI BALIUS, KAWASAKI BALIUS II, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI GPZ900R, KAWASAKI VERSYS1000, KAWASAKI VERSYS650, KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI ZEPHER, KAWASAKI ZEPHER1100, KAWASAKI ZEPHER750, KAWASAKI ZR-7S, KAWASAKI ZRX1100, KAWASAKI ZX-11, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZZR1200, SUZUKI BANDIT1200
Installed on V-Strom 1050XT
I bought it because the brake lever part number is the same for 1000 (XT) and 1050 (1050XT is different, but probably only the lever color is different). As I thought, I just put it on and no problem with brake and brake switch operation.
One point, please note that it is about one finger shorter than OEM. In my case, the ball of OEM Lever was in the way, so it's just right to get rid of it……
View detail
Fits: YAMAHA FZ1, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, HONDA CB1300 SF, HONDA CB400SF, HONDA CRF250L, HONDA CRF250M, HONDA MAGNA(V-TWIN MAGNA), HONDA X4, KAWASAKI D Tracker, KAWASAKI KDX125/SR, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI SUPER SHERPA, KAWASAKI ZEPHYRX, KTM 690DUKE, KTM 690DUKE R, KTM 990SUPER DUKE, KTM 990SUPER DUKE R
I'll be Repeating all the time.
It is a motorcycle cover of Y's Gear, and I use it while replacing it for more than 10 years.
There are many inexpensive motorcycle covers, but this Y's Gear motorcycle cover is cheap because it will last for more than 4 or 5 years.
Thanks to this, the exterior of the Scooter is still Polished after several years and it prevents deterioration. The shape is also good, and you can fix the string through the Wheel to prevent it from flying away, so it is easy to use.
If you are confused about Motorcycle Cover, you can't go wrong with this Motorcycle Cover.
Size is the size of Exactly with the Top case installed in NMAX.
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FZ1FAZER, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-10R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000
Fashionable Design
The design is not just a hexagon but a spiral. The design is not only hexagonal but also spiral. View detail
Fits: HONDA CBR750F, HONDA FX650 Vigor, HONDA XL400V, HONDA XL650V Transalp, HONDA Gold Wing Aspen Cade, HONDA doo-building, HONDA Phantom 200, HONDA Bross Products 1, HONDA Bross Products 2, HONDA Valkyrie Tourer, HONDA valkyrie, HONDA Valkyrie Interstates, HONDA valkyrie tourer, KAWASAKI Bayou 400, SUZUKI LS650P, SUZUKI VS800, SUZUKI VS800GL, YAMAHA TT600R, YAMAHA XT600E, YAMAHA Royal Star Venture
I'm glad we have it in stock.
Home center and the local motorcycle supply store didn't have it in stock and I was in a bind.
I replaced the worn plug and it seems to start better.
View detail
Fits: YAMAHA MT-10, YAMAHA MT-10, SUZUKI SV650, SUZUKI SV650, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI Z250, KAWASAKI Z250, HONDA VFR800F, HONDA VFR800F, HONDA CBF1000, HONDA CBF1000, HONDA CB650F, HONDA CB750, YAMAHA XJ6DIVERSION, HONDA CB1300SUPER BOLDOR, HONDA CB500, HONDA CB1300SUPER BOLDOR
GIVI for peace of mind
It is being used as a top case of CRF1000L.
The capacity is quite large type in 52L and Top case, but it is not as heavy as it looks, and the storage capacity is outstanding, Helmet can stand and Quantity:2pc. It can hold a helmet and a jacket. However, if you have a helmet that sticks out like an off-helmet, 1pc. is the limit because the lid won't close unless you turn it sideways.
The case itself is Plastic but quite sturdy, and the top panel is Material:There is a sense of luxury in aluminum, and even if Side case is combined with WreckerOutBack, there is no sense of discomfort in appearance.
Although you need to prepare a special base plate to attach it to the car body, you can attach and detach it with a single motion and it is quite easy to use. That's not to say it's prone to falling off, and it doesn't look like it's going to rattle even if you're driving on a bouncy road.
The waterproofing is fine, and as long as the lid is closed tightly, it doesn't seem to get flooded by a little rain. I don't know because I haven't ridden in real rain yet, but when I washed the mud stains on the exterior with Shower, it didn't soak.
SizeThe price is reasonable, but I feel that it is worth it.
I would highly recommend it to anyone who is having trouble choosing a top case for their AdventureMotorcycle.
View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
My journey to find the optimal Grip has ended with this product.
Compared with OEMetc. Just a little thicker. The thickness is exquisite.
It was a nice relief from the overly agile High Solo and the slightly heavy Throttle.
Also, it works really well with Throttle assist.
With the NORMAL thickness, it will gradually drop and you'll have to adjust it again and again, but with this Grip, once the position is decided, you don't need to adjust anything else.
The thicker it gets, the more gradual the Axel opening becomes, so if you don't like that, be careful.
This NORMAL design, slightly hard grip, and (My) The perfect thickness to fit your hand.
I don't need anything but this Grip anymore, and I hope they keep selling it.
View detail
Fits: KAWASAKI Z400LTD, KAWASAKI Z400 (KZ), KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI Z250LTD, KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI Z1000R, KAWASAKI Z1000 MkII, KAWASAKI Z1000J, KAWASAKI Z1-R/Z1-RII, KAWASAKI W800, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI W650, KAWASAKI W400, KAWASAKI W1 S/SA, KAWASAKI W3/650RS, KAWASAKI Z900 (KZ900), KAWASAKI Z1000 MkII
I like the fat Grip.
I used it on my GPZ900R.
I'm used to the Inch bar, so I thought I'd get a slightly thicker Grip.
It is thick and easy to grip, and the operation feeling is good.
It's also inexpensive, so it's Wallet-friendly when it comes to wear and tear.
I wish I could have chosen Design.
View detail
Fits: HONDA GYROUP, HONDA GYRO CANOPY, HONDA GORILLA, HONDA ELSINORE 250(MT250), HONDA APE TypeD, HONDA XR50 MOTARD, HONDA TL125IHATOVO(TL125S), HONDA XR400 Motard, HONDA XR250MOTARD, HONDA XR250, HONDA XR230MOTARD, HONDA XR100MOTARD, HONDA XR230, HONDA XLX250, HONDA XLR250, HONDA XL500, HONDA XLR250, HONDA XL400R, HONDA XL250, HONDA XL125
If you are looking for a slightly thicker Grip, this is the one for you!
The design is very good and I like it. one pointYou can choose the color of your motorcycle.
To install, simply remove the original Grip, put on the Bond, spray with Parts cleaner, and screw in. It is not too hard or too soft, so you can install it smoothly.
The reason I chose this Grip was because my previous Grip sometimes made my hands numb from the vibration, so I decided to replace it to try it out. As for the impression that I tried to use it, there is no Direct feeling in Axel from the thickness. It is a mellow feeling. Because the grip is hard, it is not a strange feeling, but there was a little uncomfortable feeling at first. The vibration to the hand was about the same. If you are looking for a slightly thicker Grip, I recommend it.
View detail
Fits: KAWASAKI ELIMINATOR 250V, KAWASAKI EN400 TWIN, KAWASAKI ELIMINATOR 750, KAWASAKI ELIMINATOR 900, KAWASAKI 1400GTR, KAWASAKI 1400GTR, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman SS, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman SS, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI BURGMAN400, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI XF650 FREEWIND, SUZUKI DL650 V-STROM XT
The size is generous, so you don't have to worry.
I bought this for my DRAGSTAR400. The cover of DAYTONA is also used for other motorcycles, but it is good and long lasting! The color is Black and it becomes a little white after long term use, but the waterproof is OK. View detail