Reviews
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
I finally see the road!
I'm useing for Honda Giorcub, but the headlight bulb was too long, and I cut the end. Not heating, not flashing. It1s very good for my bike. View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
After cutting, I put it in.
I removed 3−4mm from the last conical section to avoid putting it in Original's Light. Glass is still touching, I think 5mm is better.
Socket fits, brighter than OEM, light flickers while idling.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
I'm sure it's my Motorcycle, but it flickers a lot when I put it on as it is.
It flickered quite a bit. My Motorcycle does not have a Battery, so that may be the reason. Naturally, I don't recommend using LEDs in a battery reply. View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
XRMOTARD requires processing.
[How is it used?
Commuter Vehicle.
Was the one you received as per Image?
Heat Radiation Fin is long and the depth of the fin is too long, which is a disappointment because it hits the light lens hard when it is supposed to be guaranteed to fit the webig!
Was the installation difficult?
The tip of the LED Light Heat Radiation Fin was a little too close to the Lens as it was, so a spacer was made and the tip of the Heat Radiation Fin was modified to fit.
How was your experience with it?
The high beam is a simultaneous light, so it illuminates the front of the lamp as well as the front of the lamp. The Meter panel and Neutral lamp are also brighter due to lower power consumption.
[Included Parts:were they on?
There is not
[Was there anything that disappointed you?
Not so much Manufacturer, but rather Webeig's conformity check is not good enough!
Other items that would be helpful
XRMOTARD is guaranteed to fit, but in the end, the User will need to use Spaceretc.
If the shape of the tip of the Heat Radiation Fin were made shorter and more radial, etc., the Heat Radiation Fin would not be visible from the front and the number of compatible cars would increase. I don't know how long it will last, but overall, I think it's almost there.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Used for NSR50
Headlight went out and was replaced.
I don't know how bright it is because I basically don't ride at night.
Replacement was easy.
View detail
Fits: YAMAHA RZ250, SUZUKI COLLEDA 50, SUZUKI WOLF50, SUZUKI GEMMA 50, SUZUKI BIRDIE DX, SUZUKI VERDE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI STREETMAGIC II, SUZUKI SEPIA, SUZUKI RG50, SUZUKI MOLLET, SUZUKI LETS2 , SUZUKI K90SUPER, SUZUKI K50, SUZUKI HI R, SUZUKI GS50, SUZUKI ADDRESSV100 , YAMAHA NewsMATE , YAMAHA MATE90
Commonly usable
It's not like White, as others have written.
But considering the price, I think it's good because it's normal.
View detail
Fits: YAMAHA RZ250, SUZUKI COLLEDA 50, SUZUKI WOLF50, SUZUKI GEMMA 50, SUZUKI BIRDIE DX, SUZUKI VERDE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI STREETMAGIC II, SUZUKI SEPIA, SUZUKI RG50, SUZUKI MOLLET, SUZUKI LETS2 , SUZUKI K90SUPER, SUZUKI K50, SUZUKI HI R, SUZUKI GS50, SUZUKI ADDRESSV100 , YAMAHA NewsMATE , YAMAHA MATE90
Used with KSR80Headlight
I used it on my KSR80 MX08B6 Headlight.
NORMAL is 25W× quite dark with a 25W bulb.
I bought this product to see if I could eliminate some of the problem.
The process was very easy.
It is brighter than NORMAL.
Durability is still to come
Price is cheap, I just hope it lasts longer.
View detail
Fits: SUZUKI Let's5G, SUZUKI Let's5, SUZUKI LETS, SUZUKI LETS II, SUZUKI LETS II, SUZUKI LETS II, SUZUKI MODE GT, SUZUKI CHOINORI SS, SUZUKI MOLLET, SUZUKI CHOINORI, SUZUKI CHOINORI, SUZUKI CHOINORI2, SUZUKI SEPIA ZZ, SUZUKI SEPIA RS, SUZUKI SEPIA ZZ, SUZUKI SEPIA, SUZUKI SEPIA, SUZUKI SEPIA, SUZUKI MOLLET, SUZUKI GEMMA QUEST 90
It works better than OEM.
I replaced the Front brake as I started commuting in my LETS4 and was concerned that it was not working properly.
It seemed to get a bite after about 200?runs, and it worked well, but don't expect it to be overwhelmingly effective.
This is the Level that I wish worked this well on OEM.
It works because OEM doesn't work too well.
However, a small squeal came out from Brake.
I'm not sure how long it will last, but I think I'll keep using it as long as it doesn't get too short.
View detail
Fits: SUZUKI Address AD50 All models, SUZUKI Address EX AD50 All models, SUZUKI Address V CA1FB All models, SUZUKI Address V Tune CA1FB All models, SUZUKI Address Way AD50 All models, SUZUKI Address Tune AD50 All models, SUZUKI AddressV CA1FA All models, SUZUKI GEMMA 50 All models, SUZUKI SEPIA AF50 All models, SUZUKI SEPIA AJ50 All models, SUZUKI SEPIA RS AJ50 All models, SUZUKI SEPIA ZZ AF50, SUZUKI SEPIA ZZ AJ50, SUZUKI Chance All models, SUZUKI High UP R All models, SUZUKI High UP All models, SUZUKI MODE GT All models, SUZUKI LOVE All models
Excellent quality gasket
An excellent gasket for the muffler, I have been using it for a long period and for a long time it did not need to be replaced with a new one, since it is made of very high quality non-combustible material, perfectly fitted in size to the exhaust flange of the cylinder, ideally pressed by the muffler and does not allow exhaust gases to pass through, I advise you to purchase. This is one of the very best gaskets I've used so far --------------------------------------- ------------------- Excellent pad for the muffler, use it for a long period and for a long time, it does not require the replacement of a new one, as is made of very high-quality non-combustible material, perfectly adapted in size to the exhaust flange of the cylinder, pressed muffler and does not pass the exhaust gases of the Council to buying. This is one of the best pads I've used Powered by Google Translator View detail
Fits: SUZUKI sepia, SUZUKI sepia, SUZUKI Mode, SUZUKI love, SUZUKI Chance, SUZUKI HI UP, SUZUKI GEMMA 50, SUZUKI Address50, SUZUKI Address50, SUZUKI Address50, SUZUKI Address50, SUZUKI Address50
Good exhaust gasket
Definitely a suitable gasket for a muffler, I have been using it for a long period and for a long time it did not require replacement with a new one, since it is made of very high quality non-combustible material, perfectly fitted in size to the exhaust flange of the cylinder, ideally pressed by the muffler and does not let exhaust gases pass through, I advise to purchase, does not crack, does not blur from temperature, holds well ------------------------------------- --------------------- Definitely Useful gasket for muffler, use it for a long period and for a long time, it does not require the replacement of a new one, as is made of very high-quality non-combustible material, perfectly adapted in size to the exhaust cylinder flange, pressed muffler and does not pass the exhaust gases, advise to purchase, does not crack, does not spread on the temperature, keeps excellent Powered by Google Translator View detail
Fits: YAMAHA RZ250, SUZUKI COLLEDA 50, SUZUKI WOLF50, SUZUKI GEMMA 50, SUZUKI BIRDIE DX, SUZUKI VERDE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI STREETMAGIC II, SUZUKI SEPIA, SUZUKI RG50, SUZUKI MOLLET, SUZUKI LETS2 , SUZUKI K90SUPER, SUZUKI K50, SUZUKI HI R, SUZUKI GS50, SUZUKI ADDRESSV100 , YAMAHA NewsMATE , YAMAHA MATE90
A little brighter.
It is certainly brighter than the Normal valve. A little cheaper would be nice. View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125, HONDA NS50F
Great light! But it's expensive.
CUB's OEM Headlight was crazy dark and my eyesight was deteriorating and I was worried about driving at night, so I installed this one.
The headlight lens was also changed to Multi-reflector, so I was worried about the optical axis, but there was no problem.
I really wanted to use White color, but Valve seems to be blue, so I thought that the whole Headlight is too young to be blue. [Color] I chose Clear and it was the right choice. I thought about using LED but I didn't want it to flicker;
I am satisfied with the product, but the price is too high for the consumables.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
I'm doing my job reasonably well.
Products used in TLRs modified from 6V to 12VSpec.
I don't see any changes compared to the OEMs, or rather, I don't know, since they don't run nearly as much at night.
There is no hindrance in its use. The fact that it does not have any problems means it is a good product.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
I'm doing my job reasonably well.
Products used in TLRs modified from 6V to 12VSpec.
I don't see any changes compared to the OEMs, or rather, I don't know, since they don't run nearly as much at night.
There is no hindrance in its use. The fact that it does not have any problems means it is a good product.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Conversion to 12 V
I used it when I converted my CB50S to 12V.
It's bright enough to be used as a normal headlight with no problems.
The Regulator failed and the voltage was so high that it went out immediately, but under normal circumstances it would have worked fine.
View detail
Fits: SUZUKI Let's5G, SUZUKI Let's5, SUZUKI LETS, SUZUKI LETS II, SUZUKI LETS II, SUZUKI LETS II, SUZUKI MODE GT, SUZUKI CHOINORI SS, SUZUKI MOLLET, SUZUKI CHOINORI, SUZUKI CHOINORI, SUZUKI CHOINORI2, SUZUKI SEPIA ZZ, SUZUKI SEPIA RS, SUZUKI SEPIA ZZ, SUZUKI SEPIA, SUZUKI SEPIA, SUZUKI SEPIA, SUZUKI MOLLET, SUZUKI GEMMA QUEST 90
The price was good
It was cheaper than I expected
I don't know the limit performance as I use it normally
I think it's working well
The price was low
View detail
Fits: YAMAHA RZ250, SUZUKI COLLEDA 50, SUZUKI WOLF50, SUZUKI GEMMA 50, SUZUKI BIRDIE DX, SUZUKI VERDE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI STREETMAGIC II, SUZUKI SEPIA, SUZUKI RG50, SUZUKI MOLLET, SUZUKI LETS2 , SUZUKI K90SUPER, SUZUKI K50, SUZUKI HI R, SUZUKI GS50, SUZUKI ADDRESSV100 , YAMAHA NewsMATE , YAMAHA MATE90
It's brighter than the OEM!
The original Valve on the AXIS 90 was too dark and very dangerous to drive at night
I was looking for a Valve that would brighten things up a bit, and this is what I found
It definitely makes it brighter I can now drive safely at night
View detail
Fits: YAMAHA TOWNY(MJ50), YAMAHA PASSOLA(SA50/E), YAMAHA PASSOL(S50/D), YAMAHA PASETTA(SB50/E), YAMAHA CAROT(MA50), YAMAHA CA50/ES, SUZUKI YOUDY MINI(FY50), SUZUKI YOUDY (FZ50), SUZUKI RAN, SUZUKI RANDY(FM50A・55A), SUZUKI RANDY(FM50), SUZUKI RAN(CF50), SUZUKI LOVE(CL50), SUZUKI K90, SUZUKI K90, SUZUKI K125, SUZUKI K125, SUZUKI JR50, SUZUKI GEMMA50, SUZUKI CHANCE
DENSO Iridium Power Plug IWF16
Iridium candle was installed on a 2-stroke air cooling Suzuki K 125 motorcycle. The engine on it starts confidently, works well both at medium (3500-4500) and at high speeds (7000-8000). There are no spark plugs in the ignition. The engine pulls well.The carburetor adjusted to a normal mixture, not poor and not rich, brown soot, the motor does not overheat. View detail
Fits: YAMAHA TOWNY(MJ50), YAMAHA PASSOLA(SA50/E), YAMAHA PASSOL(S50/D), YAMAHA PASETTA(SB50/E), YAMAHA CAROT(MA50), YAMAHA CA50/ES, SUZUKI YOUDY MINI(FY50), SUZUKI YOUDY (FZ50), SUZUKI RAN, SUZUKI RANDY(FM50A・55A), SUZUKI RANDY(FM50), SUZUKI RAN(CF50), SUZUKI LOVE(CL50), SUZUKI K90, SUZUKI K90, SUZUKI K125, SUZUKI K125, SUZUKI JR50, SUZUKI GEMMA50, SUZUKI CHANCE
DENSO Iridium Power Plug IWF16
Installed DENSO Iridium Power Plug IWF16 on Suzuki K 125. The engine runs smoothly in different modes. The quality of the product is good. There is no misfire. Installed DENSO Iridium Power Plug IWF16 on Suzuki K 125. The engine runs smoothly in various modes. The product quality is good. There are no spark plugs in the ignition. translated by Google Translator View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Reliable motorcycle-specific products for OEM compatibility
It was used when the ADDRESS V100 was out of low beamValve
With the Valve out this time, I'm also going to take the opportunity to improve the light intensity, which is no darker (or less) than a flashlight and no less shabby I thought about it, but it seems unlikely that I'll be riding this motorcycle on a country road with no streetlights in the future Purchase OEM-compatible products
I've used Pine Stripe's Valve a few times in the past, but it only claims to be a motorcycle-specific product It's a good choice because it's strong enough to withstand vibration and doesn't have the light level restriction coating that is common in OEM Valve Repeat
The headlights of the ADDRESS V100 include all but the most visible to oncoming traffic and pedestrians I don't have any expectations, so I'm happy with the normal lighting
Valve itself is well made and can be purchased for a little over $400 for Wallet There is no damage Thank you Repair Parts
View detail