Reviews
Fits: YAMAHA SR250(ALL MODEL), YAMAHA SR125(ALL MODEL), YAMAHA SR400(ALL MODEL), YAMAHA TW200(ALL MODEL), YAMAHA TW125(ALL MODEL), YAMAHA TT250R Raid(ALL MODEL), YAMAHA TT-R250(ALL MODEL), YAMAHA TDR50(ALL MODEL), YAMAHA TDR250(ALL MODEL), YAMAHA TDR125(ALL MODEL), YAMAHA TDM900(ALL MODEL), YAMAHA TDM850(ALL MODEL), YAMAHA SRX250(ALL MODEL), YAMAHA SRV250(ALL MODEL), YAMAHA TW200E(ALL MODEL), YAMAHA TW225(ALL MODEL), YAMAHA TZr250R(ALL MODEL), YAMAHA VINO(ALL MODEL), YAMAHA WR250R(ALL MODEL), YAMAHA VOX(ALL MODEL)
For Japan Model 5 CYGNUS
The downside is that it's a bit long and needs to be cut
If we had a choice of lengths..
The difference in thickness is obvious as the KITACO RACING GRIP was replaced by the KITACO RACING GRIP Absorption seems to have increased considerably
View detail
Fits: HONDA MT250, KAWASAKI Z650SR, HONDA CB250T, HONDA CB350, HONDA CB360T, HONDA CB500T, HONDA CJ250T, HONDA MT125, KAWASAKI 650RS, KAWASAKI 650W1, KAWASAKI 650W1S, KAWASAKI 650W1SA, KAWASAKI 650W2SS, KAWASAKI 650W2TT, KAWASAKI AR50II, KAWASAKI KL250, KAWASAKI KLX250, KAWASAKI Z200, KAWASAKI Z250FS/LTD, KAWASAKI Z400
Manufacturer-specified product
As this is an old car, I don't have a choice I've tried a few compatible Iridium plugs, but it doesn't feel right Windshield I stock a lot of them because they are cheaper than IRIDIUM and I change them to Small Blister View detail
Fits: YAMAHA SR250(ALL MODEL), YAMAHA SR125(ALL MODEL), YAMAHA SR400(ALL MODEL), YAMAHA TW200(ALL MODEL), YAMAHA TW125(ALL MODEL), YAMAHA TT250R Raid(ALL MODEL), YAMAHA TT-R250(ALL MODEL), YAMAHA TDR50(ALL MODEL), YAMAHA TDR250(ALL MODEL), YAMAHA TDR125(ALL MODEL), YAMAHA TDM900(ALL MODEL), YAMAHA TDM850(ALL MODEL), YAMAHA SRX250(ALL MODEL), YAMAHA SRV250(ALL MODEL), YAMAHA TW200E(ALL MODEL), YAMAHA TW225(ALL MODEL), YAMAHA TZr250R(ALL MODEL), YAMAHA VINO(ALL MODEL), YAMAHA WR250R(ALL MODEL), YAMAHA VOX(ALL MODEL)
Moderately thick and soft
Compared to the NORMAL, the grip is a little thicker and riding is easier
I am satisfied with the quality of the product
I guess the problem is that it stinks of Rubber for a while
View detail
![[Stock Lever] Brake Master Cylinder Kit [Horizontal Type 14mm / Tank Separate Body Type]](https://global.webike-cdn.net/images/reviews/380/00001009380L.jpg)
Fits: YAMAHA ZEAL, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR1300C, YAMAHA XJR1300, YAMAHA XJ400, YAMAHA TZR250, YAMAHA TZR125, YAMAHA TMAX500, YAMAHA TDR250, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRV250, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA RZ250, YAMAHA RD400, YAMAHA FZR250
Haven't used it yet, but...
Haven't used it yet, but I bought it for a stable brake due to a handlebar replacement. I am very satisfied with the fast delivery. However, the packaging is poor. The product moved wildly inside the package, and the lever also shook wildly. Next time, pay attention to the packaging. I have not used it yet. I bought it for stable brake due to handle bar replacement. Delivery is very fast and very satisfied. However, the packing condition is bad. The product moved in the package, and the lever also shook. Next time you care about packaging. translated by Google Translator View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Honda C70 NGK Power Cable
Product arrived ingood condition. Immediately installed the power cable according to the instructions attached. Tested the power cable after install and functioning well. View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
My Honda C70 NGK Power Cable
Product received in good condition and nice packaging. Installed the power cable to my Honda C70 by following the attached instruction. The power cable helps the spark plug to produce strong spark for better combustion. View detail
![[STD Lever] Brake Master Cylinder Kit [Horizontal Type 14mm/Tank Separate Body Type]](https://global.webike-cdn.net/photo/impression/74/74d34b915e169ded87b420b40fb9fa36L.jpg)
Fits: YAMAHA ZEAL, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR1300C, YAMAHA XJR1300, YAMAHA XJ400, YAMAHA TZR250, YAMAHA TZR125, YAMAHA TMAX500, YAMAHA TDR250, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRV250, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA RZ250, YAMAHA RD400, YAMAHA FZR250
Look and feel
I bought it with Clutch and installed it by myself because of my longing for a separate tank
It became a fee ring with a Snap because of the Fluid exchange
I like it because it looks pretty cool
I'm trying to keep the tank angle horizontal
View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
Satisfied
Here's an in-play about two months after I put it on!
It's working without any problems!
I don't use it in winter, so I don't know, but the weak point of the Metal grip is that it is cold when you grip it I feel like there's not much to it
Because of the metal grip, the grip is naturally hard, so those who prefer a softer grip may not like it It is not
The unevenness of the rail part of the rubber is a unique grip and this is also the weak point of the metal grip We cover the slipperiness with an exquisite Grip force!
It was very easy to install and replace, and I like the stylish and simple look of it We are!
It's often installed on American and Big scooters, but it's a cute little thing I dared to wear it on my Scooter
View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
Good grip feeling
I like the metal grip and I've worn several of them, but
I like the Rail Grip the best
The slippery nature of the metal grip is a common problem
Rubber's rail section becomes a grip
It's preventable!
I personally like the look and feel of the Large (^.^)
It's a good thickness and the Grip itself is light
It looks beautiful in texture!
Installation is easier than with other metal grips
I'm hooked!
If I had to wear a metal grip in the future
I'm thinking of using the Rail Grip
View detail
Fits: KAWASAKI Z250F T, SUZUKI GSX400 F, SUZUKI GS400, YAMAHA XJR400, YAMAHA XJ400, HONDA CB400, KAWASAKI ZEPHYR400, SUZUKI GT380, SUZUKI GSX400 S, HONDA CBX400 F, HONDA CB400SF, KAWASAKI ZRX400, KAWASAKI Z400FX
That's what happens to the cheapest things
When I installed it and tightened it up, it was brand new, but the oil started blowing out of one side and I got confused
It's too bad it's brand new
But it's a cheap one, so I figured it's no use
It's definitely not a good fit for the ZrX400
Be careful what you buy
View detail
Fits: HONDA MT250, KAWASAKI Z650SR, HONDA CB250T, HONDA CB350, HONDA CB360T, HONDA CB500T, HONDA CJ250T, HONDA MT125, KAWASAKI 650RS, KAWASAKI 650W1, KAWASAKI 650W1S, KAWASAKI 650W1SA, KAWASAKI 650W2SS, KAWASAKI 650W2TT, KAWASAKI AR50II, KAWASAKI KL250, KAWASAKI KLX250, KAWASAKI Z200, KAWASAKI Z250FS/LTD, KAWASAKI Z400
Manufacturer designation is a sure thing
This time I bought a little in bulk I'm not sure about the Manufacturer's designation The unit price is cheap, but I'm not so sure about the durability of this product It would be nice if they lasted a little longer View detail
Fits: HONDA CX500, HONDA GB500, HONDA GB400, HONDA NS250, HONDA NSR150, HONDA NSR150, HONDA CBF600, HONDA CBR125, HONDA CX400, HONDA CBX125, HONDA CBX125, HONDA CB350, HONDA CBR750, KAWASAKI Z1000 MkII, HONDA CBR600F, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI GSX250S KATANA, SUZUKI GSX400
It wasn't a good fit
As it turns out, it wasn't a good product for me
Shape:When held with bare hands "Whoa, that looks good! But when I tried to put on the Gloves and hold it, it didn't feel right It might be because my hands are too small
Bite:It didn't bite well with the Gloves with Suede palms and didn't bite very well It didn't work well with the Over Gloves, which are a shaky material and are decent Throttle cannot be held Level I think it will bite you moistly
It's not that the product itself is bad, but it's quite selective For that reason, I cannot recommend it to people
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Spark plug cable for Van Van RV 200 2016
Really cool cable Easy to assemble thanks to simple instructions, paired with an iridium candle Price, shipping and delivery time ok 26% customs duties (translated by Google Translator) View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000 F, SUZUKI GSX-R1100, SUZUKI GSF1200, SUZUKI GSX-R1100, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1300R HAYABUSA, SUZUKI B-KING, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1400, YAMAHA YZF-R25, YAMAHA WR250X, YAMAHA WR250R, YAMAHA XJR400RII, YAMAHA DIVERSION, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400S, YAMAHA XJ400ZE, YAMAHA XJR400
Regrettable Pad is regrettable
Outside the XJR 1200 Swing ArmCustom.
Sometimes it is a brand-new one, I'm not satisfied with Size feeling, use feeling, water repellency for now.
It is regrettable that the heat resistant Pad of one of the uri frequently comes off.
I repair the four corners with Vinite ? ? ? Is there a problem with how I stretch it?
Aging. It will not be long after that ( ;∀;)
View detail
Fits: HONDA MT250, KAWASAKI Z650SR, HONDA CB250T, HONDA CB350, HONDA CB360T, HONDA CB500T, HONDA CJ250T, HONDA MT125, KAWASAKI 650RS, KAWASAKI 650W1, KAWASAKI 650W1S, KAWASAKI 650W1SA, KAWASAKI 650W2SS, KAWASAKI 650W2TT, KAWASAKI AR50II, KAWASAKI KL250, KAWASAKI KLX250, KAWASAKI Z200, KAWASAKI Z250FS/LTD, KAWASAKI Z400
There is no doubt what Manufacturer designates
Due to curiosity, I tried various such as Windshield IRIDIUM of each company, things with different heat value, but I think that the one specified by Manufacturer is No. 1 again. You can blow pleasantly from bottom to top. Because it is an old car Windshield IRIDIUM inevitably underneath it could not be blown down. After that it is durable, but it is cheap, so it is best to stock and replace the Small seriously. View detail
Fits: HONDA GYROUP, HONDA GYRO CANOPY, HONDA GORILLA, HONDA ELSINORE 250(MT250), HONDA APE TypeD, HONDA XR50 MOTARD, HONDA TL125IHATOVO(TL125S), HONDA XR400 Motard, HONDA XR250MOTARD, HONDA XR250, HONDA XR230MOTARD, HONDA XR100MOTARD, HONDA XR230, HONDA XLX250, HONDA XLR250, HONDA XL500, HONDA XLR250, HONDA XL400R, HONDA XL250, HONDA XL125
Processing required
It is natural, but it is not poning.
Throttle side thinks that it will be frustrated if there is no Leutor, you can not assemble it because the inside diameter of the Grip is straight unless the inner side and the base side are scraped until Rib becomes Flat.
Removal can be done easily by making a gap and improving the slip with PartsCleaner, however, Throttle side covers the above Rib, so there is a part that can be torn off. Also, when Bar End was also converted to Other Brand Product, processing was necessary again.
Remove. , You can not undo it, so you need Kill and tools for work.
I did not use glue, but I recommend coating if you do not exchange for the time being, Wire lock can also be done later, so I decided not to paint rather than make it dirty.
View detail
Fits: HONDA Rebel300, YAMAHA YZF-R3, HONDA CB500X, TRIUMPH STREET TRIPLE, HONDA CB500F, TRIUMPH BONNEVILE, TRIUMPH SPEED TRIPLE S, DUCATI M400S, MV AGUSTA BRUTALE750S, DUCATI M400METALLIC, DUCATI M400DARK, DUCATI M400DARK, DUCATI M400, DUCATI M400, DUCATI M400, DUCATI M600 DARKCITY, DUCATI M600 METALLIC, DUCATI M600 DARK, DUCATI M620S, DUCATI M600
It is cheap but enough performance
Purchased for CBR 600 RR. It is slightly worried how durable it is because it is thinner than you thought and it has a feeling of LePera..
Heat resistant Seal for sticking to the part where the Ventilation or Exhaust System hits is attached and the functional aspect is satisfied.
View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
There is no Habit
It was able to install without any problem.
I am a faction without Bond, so I blow Parkari and push it in and it is Wiring and it is over.
Did vibration increase slightly?
Did you feel luxurious as it looks?
But I'm generally satisfied with a good feeling without arguing.
Logo and the color of round mark slightly bleed off when attached.
This is not due to Parkari, but with a drama
I got blurred when pushed in.
Since then I have calmed down, maybe the color is overriding at first.
View detail
Fits: YAMAHA SR250(ALL MODEL), YAMAHA SR125(ALL MODEL), YAMAHA SR400(ALL MODEL), YAMAHA TW200(ALL MODEL), YAMAHA TW125(ALL MODEL), YAMAHA TT250R Raid(ALL MODEL), YAMAHA TT-R250(ALL MODEL), YAMAHA TDR50(ALL MODEL), YAMAHA TDR250(ALL MODEL), YAMAHA TDR125(ALL MODEL), YAMAHA TDM900(ALL MODEL), YAMAHA TDM850(ALL MODEL), YAMAHA SRX250(ALL MODEL), YAMAHA SRV250(ALL MODEL), YAMAHA TW200E(ALL MODEL), YAMAHA TW225(ALL MODEL), YAMAHA TZr250R(ALL MODEL), YAMAHA VINO(ALL MODEL), YAMAHA WR250R(ALL MODEL), YAMAHA VOX(ALL MODEL)
Fatigue reduction
I've been using Pro grip and A Lead. Both are better than OEM or Grip, there is almost no slippage. A Lead emphasizes Grip considerably It was not durable. I am tired forward due to SUPER SPORTS 750 riding so I place importance on the fatigue caused by vibration. I think that it is a product being developed considering the thickness and the rigidity of Rubber from this, but fatigue due to vibration and impact was considerably reduced. Even if the diameter of the Grip is large, it is worth to try if the Large is durable View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
iGrip for Grip Φ22G10004A
Installed without problems, tightly planted.Looks like a scooter is not bad. You have to get used to them. Hands do not slip. View detail