Reviews
Fits: SUZUKI GSX250R, SUZUKI BOULEVARD400, SUZUKI BOULEVARD800, SUZUKI BOULEVARD400, SUZUKI BANDIT1250A, SUZUKI BANDIT1200, SUZUKI BANDIT1250 S, SUZUKI BANDIT1250 F, SUZUKI BANDIT1200 S, SUZUKI BANDIT1200, SUZUKI BANDIT1200 S, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman LIMITED, SUZUKI SKYWAVE650 burgman LX, SUZUKI INTRUDER LC1500, SUZUKI Impulse, SUZUKI SKYWAVE650 burgman LX, SUZUKI GLADIUS650400
Hard to compare products
This is a product that we replace regularly. I have used other companies, but it is difficult to compare. I have no problem using the product after installation without any problems. View detail
Fits: KAWASAKI ZXR750, KAWASAKI ER-6n, KAWASAKI XANTHUS, HONDA MBX50, HONDA MBX50F, HONDA CB400F, HONDA Rebel 1100, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA RC51, HONDA CBR1000ST, HONDA CBR1000SP, HONDA CBR1000S2, HONDA CBR1000S1, HONDA CBR1000RR SP2, HONDA CBR1000RR SP, HONDA CBR1000RR Fireblade, HONDA CRM50, HONDA Dio 110, HONDA Varadero 125
Adding a little something to the look and feel
A product that unifies the Custom.
Replace the Engine with the one you are using after it cools down.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSR400, SUZUKI GSR750, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR250, SUZUKI GSR250 S, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSX-R1000, SUZUKI GSR250 F, SUZUKI GSF750, SUZUKI GSF1200S, SUZUKI GSF1200 V, SUZUKI GSF1200 SV, SUZUKI GSF1200 ST, SUZUKI GSF1200 SAV, SUZUKI GS1200SS
I use it all the time.
I use it all the time. It's not too bad or too bad, but it gives me peace of mind. View detail
Fits: SUZUKI INAZUMA400, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX1400, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI INAZUMA1200(GSX1200FS), SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSR750, SUZUKI GSF750, SUZUKI GSF1200S, SUZUKI GSF1200, SUZUKI GS1200SS
Same Brand as Oil Temperature Meter
I installed it on the Right Side of the Oil pan.
When the original bolt is removed, a small amount of oil comes out, so it is a good idea to prepare a saucer or something similar.
I put the oil that came out back in after installing the sensor.
The color is beautiful and I am satisfied with the Red Anodized.
View detail
Fits: BUELL S3, KAWASAKI GPZ1100F, KAWASAKI GPZ750F, KAWASAKI Z800, KAWASAKI Z750, KAWASAKI Z1000, KAWASAKI W800, KAWASAKI W650, KAWASAKI W400, KAWASAKI H2SXSE+, KAWASAKI GPZ750, KAWASAKI GPZ1100, HONDA VTR1000F, HONDA VFR800, HONDA VFR1200, HONDA RVF750K, HONDA RVF750, HONDA NC700S, HONDA CBR1100XX, HONDA CBR1000F
Outer and Inner in one complete unit
I have been using Takumi Cover for many years with the Inner cover, so I was well aware of the high quality of the product.
I purchased this product as an addition to my new GSX-S750.
The raised inner surface eliminates the risk of getting wounds on the car body when removing and installing the product.
It is also good to be able to do Cover even in a somewhat hot condition after driving.
The handle is attached to the Both Sides of the front cover ear (around the Mirror), so it is easy to work on the cover. The yellow color of the handle makes it easy to see the front and back.
The OuterMaterial is also very durable. The same product I purchased previously has not deteriorated after several years.
When removed, it can be folded up to a small size, so it is easy to place.
The drawback is that the price is a bit high.
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLD'OR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX
Easy to take off and put on
Anyway, it is easy to take off and put on, even with Side Back on, it fits in Exactly2L. As it is a daily use, I am satisfied that it is extensively attached from the beginning instead of attaching Seat in terms of heat resistance. View detail
Fits: KAWASAKI W400, HONDA CB1300SB SP, HONDA X-4, HONDA CB1100, HONDA CB1100 typeI, HONDA CB1100 II, HONDA CB1100 EX, HONDA CB1100 BLACK STYLE, HONDA CB1100, HONDA CB1100 EX , HONDA CB1100 EX E Package, HONDA X11, HONDA X11, HONDA CB1000R, HONDA CB1000SF, HONDA CB1000SF-T2, HONDA CBR1000RR, HONDA CBX1000, HONDA CBX1000, HONDA GL1000
Increased security with Black
The Black color makes it a good security feature.
They fade and tear after a few years, but they are inexpensive and I replace them each time.
View detail
Fits: KAWASAKI ZXR750, KAWASAKI ER-6n, KAWASAKI XANTHUS, HONDA MBX50, HONDA MBX50F, HONDA CB400F, HONDA Rebel 1100, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA RC51, HONDA CBR1000ST, HONDA CBR1000SP, HONDA CBR1000S2, HONDA CBR1000S1, HONDA CBR1000RR SP2, HONDA CBR1000RR SP, HONDA CBR1000RR Fireblade, HONDA CRM50, HONDA Dio 110, HONDA Varadero 125
Texture is good!
I was worried about Titaniumium gold, but decided on Black so that it would not stand out too much.
As expected from MORIWAKI, it is well made.
Just … I would appreciate it if it was a little cheaper.
View detail
Fits: KAWASAKI ZXR750, KAWASAKI ER-6n, KAWASAKI XANTHUS, HONDA MBX50, HONDA MBX50F, HONDA CB400F, HONDA Rebel 1100, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA RC51, HONDA CBR1000ST, HONDA CBR1000SP, HONDA CBR1000S2, HONDA CBR1000S1, HONDA CBR1000RR SP2, HONDA CBR1000RR SP, HONDA CBR1000RR Fireblade, HONDA CRM50, HONDA Dio 110, HONDA Varadero 125
Excellent Quality Oil Filler Cap
The part itself is very well made. The packaging is very Japanesque in style. Made me miss Japan even more if your familiar how items/food/gifts are package. Amazing how such a small part can make a difference in the look of the engine. Thank you MORIWAKI engineering team and Web Bike Japan. The package arrived super fast through USPS/EMS. - USA submission View detail
Fits: BUELL M2CYCLONE, HONDA CB1000SF, HONDA CB1100RS, HONDA CB1300SF, HONDA CBR1000F, HONDA CBR600F, HONDA VFR750R, HONDA X4, HONDA X4, KAWASAKI ZRX1100-2, KAWASAKI ZRX1200, KAWASAKI ZXR750, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100 RS, Others , SUZUKI GS1200SS, SUZUKI GSF1200, SUZUKI GSR400, SUZUKI GSR600, SUZUKI GSX-R1100
I'd pay a little more if I had to.
I bought this to replace the Front suspension with an XJR1300.
We have to buy a new 43mm front fork, so we have to buy a new Headlight Bracket and everything else.
I had to get Parts to get started, so I bought them in a hurry and was amazed at the quality.
To be honest, I had never heard of a Brand called Rise Corporation, and I didn't have high expectations.
The quality of the cutting and the texture of the Anodized are perfect, although from the price and the Package received, it is probably imported from a factory in China or Taiwan.
I purchased Black and there was no unevenness in color.
Some aluminum cut-out parts of this kind seem to have poor quality and strength, but since it is a headlight bracket, there is no need to worry that much.
If it is a Harley or BigSingle engine Motorcycle, it might be different.
I will use it, at least in the case of my Motorcycle, as it is not a problem.
If it should break, I might buy it again at this price.
Incidentally, since the hole for Blinker is 10mm in diameter, some countermeasure is necessary when installing the recent Small Type Blinker.
View detail
Fits: YAMAHA SR400, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100, SUZUKI Bandit 250, SUZUKI Bandit 400, SUZUKI Goose 250, SUZUKI Goose 350, SUZUKI Bandit 600 (GSF600), SUZUKI Impulse 400, SUZUKI Inazuma 1200 (GSX1200FS), SUZUKI Inazuma 400, SUZUKI Inazuma 750 (GSX750), YAMAHA FZS1000 Feather, YAMAHA V-max 1200, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA FJ1200, YAMAHA TRX850, YAMAHA TDM850, YAMAHA FZ400
XJR1300 is M22×P1.0!
I bought it because the Stem Nut was shabby when I diverted the Stem from an XJR1300.
Except for some Bolt type, I think Large-resident Yamaha cars are M22 Pitch 1.0.
This product is Version 2, but VERSION 1 (or is it unmarked?) VERSION1 (or is it indistinct?) seems to be a normal hexagonal Type.
Since I went to the trouble, I decided to get fancy and make it a star shape? I decided to make it a star-shaped cutting type.
It is an antlion specializing in aluminum cut-outs, so the quality is insanely good.
The fact that the Package is solid is also a personal Point high.
Also, please be assured that the tool itself is thoughtfully designed for use with ordinary Socket.
Material:Since this is a black anodized aluminum specification, it can be easily scratched if it is tightened carelessly with dirty tools.
Incidentally, this time I chose Pierced Type because I was thinking of making a Smartphone Mount or something from the Stem, but it seems that Closed End is also available.
If you want to make it simpler, Closed End may be a better choice.
The Pierced Type with nothing attached is also Race ish, which is also a good parenthesis. If you dare to use the Silver Pierced Type of VERSION 1, it would be super cool.
In the case of XJR1300, there is a cap on the underside of the Stem shaft to prevent Garbage from entering the material.:Plastic so it is easy to remove.
If you have changed to a pierced type Stem Nut, you must remove this or water and garbage will enter from the top and accumulate in the no Stem shaft.
Stem shafts are steel, so they naturally rust.
Remember to always remove it.
View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1400, SUZUKI GSX1400, SUZUKI BANDIT1250, SUZUKI BANDIT1200, SUZUKI INAZUMA750, SUZUKI INAZUMA400, SUZUKI INAZUMA1200, SUZUKI SV650S, SUZUKI SV650S, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650, SUZUKI SV1000S, SUZUKI SV1000S, SUZUKI SV1000, SUZUKI SV1000
circumstances being favorable (advantageous)
There is no discomfort in the Large shape, and it is just the right Size.
Key insertion and removal is not smooth.
It seems a little tricky.
Maybe if you use it, it will work better.
View detail
Fits: KAWASAKI W400, HONDA CB1300SB SP, HONDA X-4, HONDA CB1100, HONDA CB1100 typeI, HONDA CB1100 II, HONDA CB1100 EX, HONDA CB1100 BLACK STYLE, HONDA CB1100, HONDA CB1100 EX , HONDA CB1100 EX E Package, HONDA X11, HONDA X11, HONDA CB1000R, HONDA CB1000SF, HONDA CB1000SF-T2, HONDA CBR1000RR, HONDA CBX1000, HONDA CBX1000, HONDA GL1000
Very good quality
DAYTONA's accessories are not the first time I have come into contact with either the short tail kit or the material used in the design of this car's clothing. The price is very careful and cost-effective. This car's clothing is lighter and thinner, but it will not make you feel poor in texture. At the same time, it also takes care of the design of the rearview mirror. The design of the wheel lock is also equipped with a vent. It is recommended to buy a larger size! View detail
Fits: YAMAHA MT-10, YAMAHA MT-10, SUZUKI SV650, SUZUKI SV650, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI Z250, KAWASAKI Z250, HONDA VFR800F, HONDA VFR800F, HONDA CBF1000, HONDA CBF1000, HONDA CB650F, HONDA CB750, YAMAHA XJ6DIVERSION, HONDA CB1300SUPER BOLDOR, HONDA CB500, HONDA CB1300SUPER BOLDOR
Touring and commuting.
The Helmet also has a quantity, depending on the shape.:1 Set of 2pcs
As for Waterproof, there was no flooding even after driving in a reasonable amount of rain.
I could easily fit a helmet, a jacket, and gloves in it, so I could easily fit a pair of shoes in the Pannier for a day trip up a mountain.
The price is moderate because a dedicated mounting base is required, but it is a reasonable price considering the convenience of this product.
View detail
Fits: YAMAHA XJ6DIVERSION, YAMAHA XJR1300, YAMAHA XJ600, YAMAHA XJR1200, BMW R1100R, SUZUKI BANDIT600 (GSF600), YAMAHA XJ6DIVERSIONF, BMW R1100S, YAMAHA XJ6DIVERSION, YAMAHA XJ6DIVERSION, YAMAHA XJ6DIVERSION, YAMAHA XJ6DIVERSION, YAMAHA MT-07, YAMAHA FZS1000 FAZER, YAMAHA XJ6DIVERSION, DUCATI MONSTER1100EVO, YAMAHA MT-03, YAMAHA MT-07, YAMAHA MT-10, YAMAHA MT-10
Rugged Trunk
I bought the GIVI Aluminum Mono Key tail box on webike. I have been paying attention to this tail box before. The domestic price is very expensive and I have not bought it. I saw the price on webike and placed an order. The workmanship of the tail box is still good, and the capacity is also good. big enough. Usually, you can put a helmet, car clothes and other items. If you have a demand for capacity, I recommend this one. Although it is relatively large, it can really hold it. -------------------------------------------------- -------- I bought the GIVI Aluminum Mono Key rear box I bought at Webike. I have been paying attention to this tail box before. The domestic price is very expensive. price is good on the Webike, the price is placed. big enough. Usually put a helmet and car jackets and other items can be put. If there is a demand for capacity, this one is more recommended. Powered by Google Translator View detail
Fits: HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA CB-1, HONDA CB-1, HONDA CB-1, HONDA CB-1, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F
Replaced because it was rusted.
I bought this Motorcycle used, so I replaced it with a Caliper while I was doing CaliperOH.
I bought this one because the existing one had some rust.
View detail
Fits: YAMAHA RZ350, YAMAHA RZ250, SUZUKI GF250, HONDA CBX250RS, HONDA CB750F, HONDA CBX400F, HONDA CBX550, HONDA CBX550 Integra, HONDA NSF250 F, HONDA GL500 WING , HONDA GL400 WING , SUZUKI BANDIT250, SUZUKI GOOSE250, HONDA VT250 Z, SUZUKI BANDIT400, SUZUKI GS550, SUZUKI GOOSE350, SUZUKI GS650 G, SUZUKI GS550 E, SUZUKI GS750 E
Outstanding visibility
The headlight had rotted out, so I replaced it with a CIBIE 180Φ with aluminum bracket and case, and installed a SUPAREE H4 LED Headlight 40W 12000LM 6500K and KIJIMA's AeroGEARShield. The light is much brighter and more visible than the OEM one, and the Visor is very good at keeping out the wind and rain even though it is so small. I highly recommend it. View detail
Fits: SUZUKI GSF1200, KAWASAKI ZR-7/S, HONDA Monkey BAJA, YAMAHA FZR400, YAMAHA SR400, YAMAHA SRV250, YAMAHA V-MAX 1200, YAMAHA XJR400, YAMAHA XJR400R, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX400, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA XJR400, YAMAHA FZ400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT250, SUZUKI GSX400
OEM Stem Nut is rusted and unsightly.
I was looking for a replacement for the OEM Stem Nut that was rusted and unsightly.
I am satisfied with the low price and perfect quality.
View detail
Fits: SUZUKI VS700 INTRUDER 700 - All, SUZUKI LTF500F QUADRUNNER 500 - All, SUZUKI VS700 INTRUDER 700 - All, SUZUKI LTF500F QUADRUNNER 500 - All, SUZUKI LTF500F QUADRUNNER 500 - All, SUZUKI LTF500F QUADRUNNER 500 - All, SUZUKI LTF500F QUADRUNNER 500 - All, SUZUKI LTF400F KINGQUAD FSI LE 376 - All, SUZUKI LTF400F KINGQUAD FSI 376 - All, SUZUKI LTF400F KINGQUAD FSI 376 - All, SUZUKI LTF400F KINGQUAD FSI 376 - All, SUZUKI LTF400F KINGQUAD FSI 376 - All, SUZUKI LTA750 KINGQUAD AXI PS SE 750 - All, SUZUKI LTF400F KINGQUAD FS 400 - All, SUZUKI LTA750 KINGQUAD AXI PS LE 750 - All, SUZUKI LTA750 KINGQUAD AXI PS LE 750 - All, SUZUKI LTA750 KINGQUAD AXI PS 750 - All, SUZUKI LTA750 KINGQUAD AXI PS 750 - All, SUZUKI LTA750 KINGQUAD AXI PS 750 - All, SUZUKI LTA750 KINGQUAD AXI PS 750 - All
It can be used with confidence
I used to carry a FilterCup with me at all times because it sometimes loosened due to vibration, but unlike the OEM, I can wire lock it so I don't have to worry about over-tightening or loosening it, and I am satisfied with the Large change because it reduces the number of tools and gives me more peace of mind in many ways. View detail
Fits: SUZUKI SV650, YAMAHA Dragster 400 Classic, YAMAHA Dragster 1100 Classic, YAMAHA warrior, YAMAHA Dragster 250, KAWASAKI Z1000, KAWASAKI ZR-7/S, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI Eliminator 125, KAWASAKI Eliminator 250, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 400, KAWASAKI Zephyr 750, KAWASAKI Vulcan 1500, KAWASAKI Vulcan 400, KAWASAKI Vulcan 800, MV AGUSTA F4-BRUTALE, SUZUKI gsx1100s katana (sword), SUZUKI GSX1400
Seam allowance is not handled.
The soft Silk-like fabric doesn't seem to scratch.
I use it on my MT09 and it covers about 80% of the side cowl, which is enough.
The storage bag is also easy to use.
The problem is the seam allowance on the back. They tend to fray easily, and a bunch of fine lint gets on the Motorcycle and clothes. In winter, the static electricity is terrible.
When you take off your clothes, you will notice that there are clumps of WHITE lint everywhere, and you will realize that you have been running in an embarrassing state.
If it just happens to be HaGap, fine, but if everything is of this quality, there is no Repeat.
View detail