Oil seal

Project bike, one of most difficult to work on as need to disassemble exhaust to access. Easy to replace once old one removed. Love OEM parts at good price View detail

UV sensitive, torn after one year.

The 2LSize is too small for the MT09. Also, it seems to be weak against ultraviolet rays, and the part that was exposed to the sun well deteriorated and tore after not lasting a year. View detail

be too thick

be too thick
Size is not right, so I stopped using it. View detail

Buy ReplaceOil Filter!

Oil Filter Changed. View detail

lightweight

I purchased the SUNSTAR RK-102-41 for my YZF-R25. I have been using the 41 for my Driven Sprocket, so I decided to use the same one this time as well. View detail

A little short.

I selected it from the vehicle compatibility chart, but the Rear is covered well, but the Front is not covered enough. I can compromise because I use it in a covered parking lot, but it is hard to lock the chain lock. It was a little more.
The texture of the Cover is good. As mentioned above, it is roofed, so I don't think it will be water repellent or strong, but I think it will keep for a long time. View detail

Good item for monkey 125

It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail

Standard NGK

I replaced the Plug because it was still the same as when I bought the vehicle used.
The work itself was easy to replace as it could be done with on-board tools.

I think it is a feeling problem that it may turn to be a little Smooth. View detail

Size did not fit….

I bought the same DAYTONA made WaterRegisterntLight when I delivered my motorcycle, but I bought a 3LL because I misunderstood the size chart and it was a little bit Oversized around the Rear.

I bought the LL size after looking at the compatibility chart, but it's a Small size.
Although it is cheaper than WaterRegisterntLight, it is a bit peLePera and unreliable, and the anti-flap Belt is not sewn onto the Cover. (It is included, but it is a separate part.) Inconvenience.

One of my colleagues at work is a motorcycle rider, so I gave it to him for free.

I was actually going to buy LLSize's WaterRegisterntLight, but they were out of stock, so it was somewhat less damaging in terms of Gold amount. (Lol)
Now we will make the WaterRegisterntLight in the size we purchased last time. View detail

Steel

Duralumin would reduce it.

So we decided on Steel.


It is heavy, but I don't mind.

It looks no different than OEM Parts.

It is also inexpensive. View detail

Would have to be one of the better value magnetic drain bolt

About quality and texture, I can confirm that the quality is great and that the material used is aluminum alloy with a permanent magnet on the base of the bolt. About the feeling of use, Would have to be one of the better value magnetic drain bolt that allows for securing with lockwire and successfully removes fine iron powder from the engine oil.Products to buy together, The drain bolt only comes with one sealing washer so it would be a good idea to add a few spare sealing washers to your cart for future oil changes.Difficulty of installation, I can say the fitment of the drain bolt for my installation was very easy due to the exhaust not limiting the access with the use of a socket and 3/8 drive ratchet.Cost performance and comparison with other products, The pricing of this product is great. You receive a drain bolt with a strong magnet and the head of the bolt has the functions to attach locking wire. The pricing of other drain bolts with similar features like the one from Takegawa is double the price and I don't see the reason for it.About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff even added one of their stickers to the order which I'll be adding to my helmet. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail

To match intake and exhaust system changes

MJ's position was raised due to the air cleaner element and the exhaust air removal Up. View detail

It's always this

Cospa is probably the best.
I also hope it comes with a Drain bolt gasket. View detail

I thought the performance would be the same as OEM...

It looks exactly the same as the OEM Product and is the same size as the OEM Product, but the performance...I don't know yet. View detail

Genuine Kawasaki Sump plug Washer for KLE400 1998

The oil on this bike was due for a change and therefore, we also needed to source a new sump plug and also the washer that goes with it. It is always better to be safe than sorry so you don't have any leaks whilst changing. The part was not super hard to find by simply using the tools Webike provide on their hel pages and to be 100% sure, I also cross referenced with Kawasaki schematics. The price for the washer was really good value and added to the other parts in my order, the shipping worked out really cost efficient too. Shipped by EMS all arrived in 5 days. EMS are good value, very fast in delivering and better than some other couriers. All the items in my order were packed individually by Webike warehouse and all nicely padded out in the box so nothing could get damaged in transit. This washer came in the Kawasaki packaging and are really good quality. They are very well made and no tarnishing was found. The are only washers but as they are essentially crush washers, they are definitely needed. Fitted pretty easily and finished off this rebuild. No danger of a leaky sump plug now. Thank you Webike, great job. View detail

Magnet works effectively

It is cheap and the performance is perfect. However, I don't think it has much of a dress-up effect because it is usually invisible, even though it is Blue in color. View detail

No problem

I installed it on a 1984 GPZ750R and it is perfectly fine. The only thing is that it is 2mm thinner than the OEM Product. Don't forget to check the freed after installation. View detail

Genuine Kawasaki Carb Holder for GPZ400R 1989

A small job but this carb seal for the GPZ400R 1989 model was needed as the old one deteriorated over time. Finding the part was pretty straight forward by using the tools Webike provide. When I checked on Webike to see if they had the part, luckily they had so added to my order. With some other parts, all were delivered by EMS in 5 days. The boot is good quality as I expected anyway from Kawasaki and having had these kind of parts previous. Old ones are susceptible to damage but it's rare, they usually just deteriorate with age of lack of maintenance just like this one. The cost of this part was really good value. It came in it's own little packet and no damage in transit. The material is some kind of rubber but strengthened, not 100% sure with what but a new boot will do the job great. Very happy with the ourchase. Thank you Webike. View detail

Functions are fine. Price is high.

[How is it used?
ZX-6R in 2023 MODEL.
The OEM filler cap was unusually stiff and difficult to open and close, so we changed it to one that opens and closes with a tool.

Was the one you received as per Image?
No scratches, with Sticker.

Was the installation difficult?
It's a pontoon.
It can be closed by hand, but it is recommended to use a tool to tighten it because it is difficult to apply Torque.
If hand-tightened, I would like to use at least Wiring to stop it from loosening.

How was your experience with it?
The quality is good and the Wiring hall is available.
However, Oil Filler Caps seem to be too expensive for any manufacturer. View detail

Fit like a dedicated Cover!

[How is it used?
Used at home Garage

Was the one you received as per Image?
Almost as shown in the Image, but somewhat flimsy impression

How was your experience with it?
CinderellaFit, as if it were exclusive to CL250!
Size was perfect. View detail