Reviews
Fits: HONDA Super Cub MD, HONDA Super Cub Pro, HONDA solo, HONDA MD90 (Postal CUB), HONDA MD70 (Postal CUB), HONDA CL50, HONDA MD50 (Postal CUB), HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB110
OEM Product is good
OEM Product is still good! View detail
It now looks like a CUB.
I used to use the Power Filter that came with the Mukawa Bore Up Kit, but it broke off at the base due to deterioration, so I purchased this filter.
It is easier to handle in first and second gear, and the intake sound is quieter, making it more like a CUB. Although it is not visible from the outside, I am satisfied with the quality and the large size.
View detail
Fits: HONDA Super Cub 70, HONDA Super Cub 50, HONDA Super Cub 90
Facial Color Refreshing
Easy installation, complexion reflecting, bright light... the trifecta! View detail
Product # 25602
This time we needed grips for the "Suzuki Birdie". Once again, the grips from "Hunter" did not disappoint. Everything fits perfectly, the workmanship and material are top notch as always. I am very glad! View detail
I wanted Cap.
I purchased this product to connect to the Ignition coil in Mukawa and wanted to unify the colors.
Cutter off the adhesive bonding the Cap to the cord, peel off the Cable outer skin of the Mukawa Ignition coil, insert it, and fix it with adhesive, and you are done.
The excess Cable of the product in question is used in place of the Cable attached to the OEMCoil.
This would have been unnecessary if caps in a variety of colors were available, but they are not.
Even if only the cable is replaced, the idling is stabilized and the long-used OEM product is refreshed.
View detail
Power cable & elect. module Dev'moto
Bonjour from France Thanks you for quick shipment of my order , i fixed it on ma yam sr 125 in addition of a new electronic module Dev'moto(made in France) with an iriduin plug already than replace the TCI -dead-:( the result is more better ( already too with the new module) cold cranking + little better torque at low rpm, and more i could reduce my idle setting ... so very happy with my purchase ... voilà ! View detail
For 17 years.
I bought the same Exhaust System 17 years ago at a local store and installed it myself.
I was looking for a new exhaust system for my Silencer when the weld cracked.
The sound is still the same and quite quiet.
Good looking, good price.
I also appreciate the fact that you can sell me an Exhaust System that fits my 36 year old Motorcycle (HA02), which is the same age as mine, for a long period of time.
View detail
Good appearance and balance
Purchased along with 53 Seat. It looks and balance are both great!
Two washers on top of the Rear suspension when installed (quantity):Pair (for Left and Right) Note that you will need (4 sheets in total).
View detail
Happy!
I am satisfied with the look and balance! Comfort is a little firm, but I think it will soften with use. View detail
Fits: HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA CUB PRESS, HONDA LITTLE CUB
Ride is hard
Used with HA02 SUPER CUB 90. The ride is firm, adjustable in 5 levels, and even at the weakest setting, the damper is effective and picks up bumps on the road surface. The Spring setting is firmer than the OEM, but I think it is standard. However, I have lower back pain and it came back after only a few kilometers. Therefore, I prefer the softer OEM setting for my lower back.
The OEM has no offset between the Upper Mount and Lower Mount, but BlackShock has the Lower Mount offset inward by a little less than 1 cm. Therefore, the Rubber Bush inside the Mount absorbs some of the distortion and is used for mounting.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA MONKEY
Great oil gauge
Help add to the final look of your motor with this machined oil dip stick. same length as the stock 50cc but adds a little bit of class to the overall look of the engine View detail
Exhaust Studs
These feel great but were missing the nuts to hold the exhaust on. not a problem but would be nice if they were provided as showen in the pictures View detail
OEM Equivalent Product, cheaper than OEM
Used for LITTLE CUB.
The low beam ran out, and a short time later the high beam also ran out. I bought this one because it was an emergency situation and it was immediately available in stock. The standard is 25-1. The Pine Stripe part number is 1P2015.
The grade of the bulbs is also the same as the OEM, White Hot bulbs, not Halogen.
I also found HalogenType, but the price difference was about three times as much, so I decided to go with the cheaper version.
Replacement is Light rim bottom, Quantity:Pair (for Left and Right) Remove the screw on the Plus of the light rim and lift the light rim upward to remove it.
The Glass part is replaced while touching as little as possible. Time required:2 minutes.
It lit up with no problem. I am relieved. I don't know about the durability yet, but it is a long-established domestic product and I am sure there will be no problem.
View detail
Fits: HONDA CT125, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB 90DELUXE, HONDA SUPER CUB70DELUXE
Now you can Tandem!
It took a little bit of effort to install it, as it feels like it requires a lot of hang and you have to push it in. It is a little difficult to install unless you are careful. View detail
takegawa is best
Before purchasing Takegawa brake arm joint, I thought about it with Kitako product. I bought a brake adjustment bolt with Kitako, so I was going to make it into a set. but I bought Takegawa Arm Joint because the design and details looked prettier. The finish of the material is good as I thought, and I haven't installed it yet, but I think it will go well with Super Curve because I bought it in silver like a genuine product. Thank you. View detail
Aiming for low fuel consumption & low noise
[How is it used?
In the process of maintenance &restore of the LITTLE CUB that was given to us, we replaced the 90cc engine by Tanaka Shokai's 90cc engine and changed the Driven Sprocket from 41 to 37 from the OEM one. (Driven Sprocket has been replaced with 16T) 。
After the Restore was completed, I rode around for a while in the above state...
First gear is almost useless. (Blows off a few seconds after starting) I wanted to swing a little more to the long side, so I purchased the 35 this time.
Did you receive the item as per the Image?
It is indistinguishable from the 37 Driven Sprocket by KITACO that I purchased last time. (It's the same Manufacturer and only 2 guns are different...) I was too familiar with Parts, a reliable and trustworthy company that has been really good to me, and the product was just like the Image.
Was it difficult to install?
The installation itself is a simple process of loosening four Nuts and tightening them with the specified Torque after replacement, but it is a very tedious process to get to that point.
As mentioned in the previous issue, in order to remove the Rear Axel Shaft from the Little Cub, the Exhaust System, which is blocked on the same line as the Shaft, must be removed before work can proceed. (Limited to OEM Type Exhaust System shape, Up type Exhaust System is Large sturdy) 。
Remove the Exhaust System, remove the Rear brake&Torque rod, remove the Axel shaft, remove the center nut, remove the Rear wheel from the body, loosen the 4 nuts as mentioned at the beginning, replace the Sprocket, and assemble in the reverse order of the previous procedure. The assembly is completed in the reverse order.
How did you like it?
I honestly thought that reducing the Driven side by only two guns would not change anything.
In fact, the Large sound did not change, but the engine became long enough to be useful from 2nd gear, and when cruising on a main road at the same pace as a normal vehicle, the engine sound was reduced and Stress was not felt. The secondary reduction ratio has increased from 2.3125 at 37 to 2.1875.
Was "Included Parts:" attached?
None, Rear sprocketQuantity:This is a 1 pc. only product.
Were there any disappointments?
None
Black, steel, and plain product, but the NORMALSpec. of the old CUB series is covered by the Chain Cover, so you can't see anything from the outside, so it doesn't matter what it looks like as long as the product is functional and solid.
This product is more wallet-friendly than the high-end Duralumin&Anodized Treatment Sprocket in terms of durability and cost. (This is not a denial of luxury Sprocket.) 。
Other items that would be helpful
Point and hang of installation
Above. Was it difficult to install? As described in Section 3.2, be sure to perform the work before and after the installation of this product, and do not forget to tighten it without haste.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, but the product is very easy to understand.
[Notes]
When replacing the rear side bracket, the braking system must also be removed, so be sure to assemble the bracket securely when installing it.
As for my personal trouble, I have replaced the Chain with a thicker Plate one that is specially designed for durability, and the Chain Cover Bracket is interfering with the Driven Sprocket as its diameter is reduced................it makes me cry.
[ITEMS TO BUY TOGETHER
Aside from replacement for setting, if replacement is for wear, the front and rear Sprocket&Chain is Quantity:This is a place that should be replaced by Set, so please consult with your budget before purchasing.
Since the rear wheel is to be removed and attached, it is better to take into account the wear condition of the rear brake shoe if there is room, so that the work can be done only once, which will make it easier later.
[Opinions and requests to Manufacturer
I continue to be a customer for various parts of Mini bike and I look forward to working with you in the future.
View detail
Made by DAYTONA
[How is it used?
Used to replace front and rear Drum Brake Shoe,
Because the previous Shoe replacement time was unknown and it was not working well.
How was your experience with it?
When Brake was applied with the same sensation as before the replacement, the Rear brake worked so well that it locked up!
How did it compare to other products?
It may not be as effective as a disc brake, but it is as good as a disc brake, and I am very satisfied with the large size.
[Points to note]
Nothing in particular, but beveling of the shoe, cleaning of the drum brake, and grease up are also required prior to installation.
Brake wires, clutch wires, and other parts were also replaced, both front and rear, but it was not a difficult job, as it was started in the morning and finished before noon.
(I'm giving it 4 stars because I'm not sure how durable it will be.)
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
good choice
I bought it after seeing a review that you often replace it with a set with Takegawa reinforced coil. I bought any color because it was hidden in a cowl, and I connected the ngk power cable with the Takegawa reinforced coil and installed it. I had to cut the length and install it, but I thought there would be some loss, so I just connected it. It starts up well and I think it's effective in output. Thank you. View detail
great greap
I liked these grips, they look like factory ones, they were delivered in 2 weeks, I’m very happy with the purchase, I will recommend them to friends ------------------------------ ---------------------------- I liked the vulture data, they looked like factory ones, delivered in 2 weeks, I am very pleased with the purchase, I will advise my friends Powered by Google Translator View detail
japan product
This using cd 125 rear tail lamp.good qulity plastic.genuine product form honda.made in japan .highly recomenderd for honda lovers View detail