Reviews
Fits: HONDA broadcloth, HONDA Broad90, HONDA beat, HONDA Dio (2 Cycles), HONDA Dio (2 Cycles), HONDA baton, HONDA baton, HONDA baton, HONDA baton, HONDA baton, HONDA baton, HONDA Superdio, HONDA Superdio, HONDA Lead 90, HONDA Lead 80, HONDA Lead 50, HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA Superdio
Chamber replacement
I used it with LEAD 90.
It worked fine with no exhaust leaks.
I don't need three but bought them because they were cheap.
View detail
Fits: SUZUKI RMX250S, SUZUKI RM250, SUZUKI RM125, SUZUKI RM250, SUZUKI DRZ400SMZ, SUZUKI DRZ400SM, SUZUKI DRZ400, SUZUKI 250SB, SUZUKI DRZ400 S, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KX125, KAWASAKI KX125, KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI D-Tracker X, KAWASAKI D-Tracker, HONDA read
I bought the brake pad because it was worn out.
I bought the brake pad because it was worn out. Among Daytona products, there are red brake pads and gold. Personally, I like red more. Red is durable and has similar braking power. The pad I used before is gold, but if you compare it, I like red more. I recommend red. View detail
Fits: HONDA CRF150, HONDA CRF230F, HONDA MBX125, HONDA SPACY125, HONDA LEAD50, HONDA Super Cub delivery90, HONDA Super Cub delivery70, HONDA Super Cub delivery50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA JAZZ 50, HONDA CHALY 70, HONDA CHALY 50, HONDA GORILLA
Not as good as I had hoped.
I heard a rumor that this is the standard for CUBfor Race! I heard a rumor about this, so I tried it.
Since it is a used car, it may be a problem on the Drum hub side, but I did not feel that it worked as well as I had hoped.
I think it's just a change from the OEM rubbing atmosphere to being a little stuck.
However, there was an opinion that it became difficult to fade after making it to this Shoe.
Maybe that is possible because the friction material is different.
View detail
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
Resistant to rust
Rust resistant Material:Stainless SteelPad pin。
It is a little bit longer for one push for Caliper, but it can be used as it is with OEM and replacement.
Features easy maintenance and performance retention, but hard Material:The surface of the shaft that touches the pad is flattened a little.
It doesn't feel like it's deforming more and more, but it doesn't feel good because I never had this happen with OEM Parts. But OEM parts will rust....
I give it 3 stars because it is rust proof and I haven't had any Trouble.
I think the price is high compared to the quality.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB600F, HONDA CB750F, HONDA CBR1000F, HONDA CBR1100XX Super Blackbird, HONDA CBR250R (2011-), HONDA CBR250R (MC17/19), HONDA CBR250R (MC17/19), HONDA CBR400R, HONDA CBR400R, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
It's safer to change it.
The OEM Bleeder Bolt is always going to Rust and Decay, so this Material:It is safer to replace it with Stainless Steel.
Be sure to bleed the air and refill the fluid in the MASTER after replacement.
The Bleeder Cap was made by Straight.
View detail
Fits: HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA CB-1, HONDA CB-1, HONDA CB-1, HONDA CB-1, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F
I put it on my ZrX1200 DAEG.
ZrX1200 DAEG OEMHydraulic Clutch Bleeder Bolt This Material:I replaced it with a Stainless Steel one. The OEM Bleeder Bolt is made of steel and will always rust over time, so it's best to replace it. Don't forget to bleed the air and refill the fluid in the MASTER after replacement. View detail
![Main Jet [KEIHIN Round Type/Small]](https://global.webike-cdn.net/uiu/impression/202111/13_1019292_618fff7330bd3.jpg)
Fits: YAMAHA VINO, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X, SUZUKI VERDE, SUZUKI VERDE, SUZUKI VERDE, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI STREET MAGIC, SUZUKI STREET MAGIC, SUZUKI STREET MAGIC, SUZUKI STREET MAGIC
KITACO Main Jet # 78
Was purchased for Honda Super Cab Custom to adjust the fuel mixture after installing kit 75, size 78. Everything is great, I recommend it for purchase. Purchased for Honda Super Cab Custom to adjust the fuel mixture after installing the kit 75. Everything is great, I recommend it for purchase. View detail
Fits: HONDA CRF150, HONDA CRF230F, HONDA MBX125, HONDA SPACY125, HONDA LEAD50, HONDA Super Cub delivery90, HONDA Super Cub delivery70, HONDA Super Cub delivery50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA JAZZ 50, HONDA CHALY 70, HONDA CHALY 50, HONDA GORILLA
It was cheap.
Pretty reputable, Drum brake and a bit of a grippy Tire for safety! View detail
Fits: SUZUKI ADDRESSV125 S, SUZUKI ADDRESSV125 G, SUZUKI ADDRESSV125, SUZUKI Address125, SUZUKI VECSTAR150, YAMAHA RZ50S, YAMAHA RZ50, YAMAHA RZ50, YAMAHA Helmet in JOG SPORT, YAMAHA JOG-ZII, YAMAHA JOG-Z, YAMAHA JOG-EXAPRIO, YAMAHA CHAMP RS, YAMAHA JOG SPORT, YAMAHA JOG, YAMAHA JOG7.2PS, YAMAHA 7PSJOG, YAMAHA JOG, YAMAHA JOG, YAMAHA JOG remote control Zr EVOLUTION
Just the right size for JC75 GROM
I used L Size for another car model and bought M Size for JC75 Grom this time.
For more information on the product, I've posted an impression over at L Size.
Overall, I think it is necessary to divide the cost by making reduction in cost conscious.
There is fading and fabric deterioration, and it is not very durable.
However, the price is kept low, so I think it is a good choice if you assume that you will replace it regularly.
We recommend this product to those who think that Cover is consumable.
View detail
Fits: YAMAHA RZ250, SUZUKI COLLEDA 50, SUZUKI WOLF50, SUZUKI GEMMA 50, SUZUKI BIRDIE DX, SUZUKI VERDE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI STREETMAGIC II, SUZUKI SEPIA, SUZUKI RG50, SUZUKI MOLLET, SUZUKI LETS2 , SUZUKI K90SUPER, SUZUKI K50, SUZUKI HI R, SUZUKI GS50, SUZUKI ADDRESSV100 , YAMAHA NewsMATE , YAMAHA MATE90
Used with KSR80Headlight
I used it on my KSR80 MX08B6 Headlight.
NORMAL is 25W× quite dark with a 25W bulb.
I bought this product to see if I could eliminate some of the problem.
The process was very easy.
It is brighter than NORMAL.
Durability is still to come
Price is cheap, I just hope it lasts longer.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA ADV150, HONDA LEAD 125, HONDA LEAD 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA SUPER CUB C125, HONDA SUPER CUB C125, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA SH MODE
KITACO Full Exhaust System Gasket (1 Set of 2pcs.)
It is an old motorcycle, but it is just right for Repair Parts! View detail
Fits: KAWASAKI KSR-I, KAWASAKI KS-I, KAWASAKI KSR-II, KAWASAKI KS-II, KAWASAKI KSR-110, KAWASAKI Z125PRO, SUZUKI LETS II-S, SUZUKI SEPIA ZZ, SUZUKI SEPIA RS, SUZUKI ShotS, SUZUKI Address Tune, SUZUKI ADDRESS V50, SUZUKI AddressVTune, SUZUKI GAG, SUZUKI HI-UPR, SUZUKI ZZ, SUZUKI Address50, SUZUKI ADDRESS V100, SUZUKI ADDRESS110, SUZUKI ADDRESS V100
It's not expensive, but it's not some no-name cheap Cover.
To be honest, I thought they were all the same, like Motorcycle Covers, but they were completely different from the no-name cheap Covers.
I bought a Motorcycle Cover for the first time in a long time, and I was surprised at the evolution of the shape and Ventilation.
There is also a more expensive Cover in the world, but if you think that it is just a Cover and you are using a cheap Cover, you should be surprised at how long it takes for the Cover to wear out if you pay Plus1500 and make it this much.
That would be the best if you had a garage with a Garage, but that's not what I'm talking about.
View detail
Fits: HONDA CRF150, HONDA CRF230F, HONDA MBX125, HONDA SPACY125, HONDA LEAD50, HONDA Super Cub delivery90, HONDA Super Cub delivery70, HONDA Super Cub delivery50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA JAZZ 50, HONDA CHALY 70, HONDA CHALY 50, HONDA GORILLA
Well, it works.
I installed it on my XLR200 and it also came with a for replacement spring.
It is made by DAYTONA with a sense of reliability, so you can use it with peace of mind.
It works well in the rain, easy to Control in Dirt and Well in Asphalt.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA ADV150, HONDA LEAD 125, HONDA LEAD 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA SUPER CUB C125, HONDA SUPER CUB C125, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA SH MODE
It contains two OEM Parts for the price of one.
Compared to OEM Parts, the fitment is a little looser and requires more hang when installing the Engine and Chamber.
There are no exhaust leaks.
OEM PartsYou get two for the price of one.
It's a great way to save money on maintenance costs.
KITACO, Webike
Thank you.
View detail
Fits: HONDA CRF150, HONDA CRF230F, HONDA MBX125, HONDA SPACY125, HONDA LEAD50, HONDA Super Cub delivery90, HONDA Super Cub delivery70, HONDA Super Cub delivery50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA JAZZ 50, HONDA CHALY 70, HONDA CHALY 50, HONDA GORILLA
Unmistakable braking power
I changed the Brake Shoe as well as the Tire, and I was able to turn the BrakeTurn while drumming! View detail
Fits: SUZUKI Birdie90, SUZUKI Birdie80, SUZUKI K50, SUZUKI K80, HONDA SUPER CUB 90, HONDA SUPER CUB 50, YAMAHA BWS, YAMAHA MATE NEWS80, YAMAHA MATE NEWS 50, YAMAHA TOWN MATE80, YAMAHA CHAMP CX, YAMAHA JOG POCHEtt, YAMAHA MATE, YAMAHA Axis Treat, YAMAHA GEAR C, YAMAHA YSR80, YAMAHA AXIS 90, YAMAHA YSR50, YAMAHA VOX, YAMAHA YB50
The size is small and I made it electric for Motorcycle.
I bought this for my APE 50, but it is not tall enough to hide the lower part of the car.
I have no choice but to use it on my electric for Motorcycle.
In addition, the tip of the lower string attached for wind protection is not Clip shape, so it is troublesome to tie every time.
So I'm thinking of getting something from the 100s to counteract this.
View detail
![Main Jet [KEIHIN Round Type/Small]](https://global.webike-cdn.net/photo/impression/46/468f841c64311e0cb6cd00398e445cd7L.jpg)
Fits: HONDA JOKER Helmet, HONDA ATC70, HONDA CB50, HONDA CB50, HONDA CL50, HONDA EZ-9, HONDA R&P, HONDA TL125(TLR125), HONDA TRX70, HONDA XE50, HONDA XE75, HONDA XLR80, HONDA XLR80, HONDA XR100MOTARD, HONDA XR80, HONDA APE 100, HONDA APE 100, HONDA APE 100 TypeD, HONDA CABINA, HONDA CABINA 90
The number is set in detail, so you can find just the right spot.
Commonly used areas are chopped at #2 or #3 so you can find just the right spot.
My method would be to use Quantity in the thinnest possible direction.:Set and go. "It's perfect. to the 1st Large.
I think the tick is 2 or 3 then, so it's almost perfect and prevents burning.
View detail
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
easy mark
Used for KLX125
Compared to the OEM, the screw mountain part looked smaller, but I was able to install it without any problems.
It's just the right length without the excess length that other people have mentioned.
The rest depends on how rusty it is and how fast it wears out.
At any rate, it is worth using this kind of Parts supply because it is very nice!
View detail
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
Used on D Tracker 125 rear caliper
It's just to keep it from rusting and to see if it will move better. The quality is good, so there is no problem. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA ADV150, HONDA LEAD 125, HONDA LEAD 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA SUPER CUB C125, HONDA SUPER CUB C125, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA SH MODE
Exhaust Flange Gasket By Kitaco
I now will always have one of these in my spares parts box as I was without use of my bike for a week while waiting for a gasket to arrive at my local Honda store after having an exhaust leak when swapping over from my aftermarket exhaust back to my stock exhaust. The price from Kitaco is excellent and the quality of the gasket is a perfect fit and seal when installed. It is very nice that they are also sold in a twin pack for this price. Another quality product from Kitaco that I can recommend and as always outstanding customer service and delivery from Webike. The only suggestion I can make is for Kitaco to including some small sticker with there products like other brands do. View detail