Reviews
Ideal for the time being
I am pleased with the actual color against the color humidity, which is exactly what I expected. The luminous intensity is not as good as LEDs, but nighttime driving in the city with streetlights is not a problem. When entering Tunnel during the daytime, it is difficult to see where your car is illuminated. I think it is a good choice for inexpensive and temporary use. View detail
It's getting better the more I use it!
After the replacement, I was concerned about the low RPM range slowness, but as the distance increased, I no longer felt any discomfort. I was not aware that Plug required break-in operation, but is MOTO-DX an exception?
Anyway, I'm happy with the initial dissatisfaction, but it would be nice to see the current performance from the beginning.
View detail
Size was not suitable for CBR1000RR-R.
[How is it used?
It is used in a covered outdoor parking lot.
I am using it on a CBR1000RR-R, which is listed as a compatible model, but the size is too large.
I think it is also due to the fact that I am using Mirror in a folded state, but the excess part of the Cover contacts the ground quite a bit.
Due to the nature of the product, many people will use it outdoors, but the Cover will stick to the ground when it rains.
[Points to note]
If you are thinking of using it on CBR1000RR-R, we recommend you to buy 1Size or 2SizeSmallest one.
View detail
![Two Tone Taffeta Bike Cover [3L]](https://img.webike-cdn.net/catalogue/images/102051/IMO9150_02_TS.jpg)
Cheap and easy-to-use Motorcycle Cover that easily protects your car from weather and theft.
[How is it used?
The purpose is to prevent age-related deterioration and staining due to weather, since the bicycles are parked outdoors in the open air.
Also, the purpose of preventing tampering and theft.
Was the one you received as per Image?
Based on the image and dimensions Size, it is almost exactly as shown in the Image.
How was your experience with it?
? Water repellent finish
? Silver coating that reflects direct sunlight
The Mirror part and the Blue fabric are made of
The turnaround is Accent on the Design.
The keyhole is designed for large locks, and PPTape is used.
Separate colors are used for easy distinction between front and rear.
(Front wheel:Red Rear wheel:Black)
- Buckle at the bottom of the vehicle body Prevent wind fly Belt
Equipped with
? Robust sewing with double needle Sewing machine
? Use 75 denier Polyester taffeta
[Points to note]
I've also noted this clearly in Manufacturer as a precaution,
How to use and care for it.
Do not apply Cover to vehicles that have been wetted by rain or car washes.
Water left on the car body and the lining of the Motorcycle Cover adhere to each other, causing friction and possibly scratching the car body with small gravel, fine dust, etc. We recommend that you remove water, dust, gravel, etc. from the car body thoroughly before using the cover.
Motorcycles that have been used in the rain before the Motorcycle Cover is applied should be wiped clean and maintained at a later date.
Avoid using BacCover during typhoons, storms, and other strong winds.
High winds can cause flipping and flapping of the Cover, which can lead to abrasions and tipping of the Motorcycle.
If you choose to install the Cover to protect your Motorcycle from non-products caused by high winds, please use it with caution and at your own risk.
Wind, including strong winds, can cause the Covers to flap, which may result in peeling of the paint film and scratches on the car body.
*We recommend that you prevent your motorcycle from tipping over in strong winds when the Motorcycle Cover is hanging.
Motorcycle Covers that have been soaked in rain will not dry quickly, so please remove the cover from the vehicle and allow it to dry completely before using.
If the ground is still damp after the rain has stopped, condensation inside the Cover may damage the painted surface and stain may occur on the Gold surface.
Also, the temperature difference between the inside and outside of the cover may cause moisture to form inside the cover, so please remove the cover periodically to evoke the moisture.
Water-repellent sprayetc. can be applied after drying to extend the life of the Cover.
*Regular maintenance of the motorcycle cover by spraying water-repellent spray is recommended.
How did it compare to other products?
The fabric is thin, so we recommend replacing it each time it is used, as it may tear due to age-related deterioration depending on the environment in which it is used.
It is low-cost, but with consideration for identification of front and rear, and keyholes in front and rear, making it convenient to install a locking device.
It is also good that the CenterBuckle belt is equipped with wind-skipping protection.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
The way to distinguish the front and back is to hang the Motorcycle Cover in front of the Blue colored One point.
The color of the keyhole on the Front is Red, so it can be distinguished here as well.
The color of the Rear keyhole is Black, so it can be distinguished here as well.
It is safe to prepare a front and rear locking device. If installed at the same time, it will reduce the RISK of flying Motorcycle Cover in the wind.
Also, by installing locking devices in the front and rear from theft prevention, the risk of being targeted is reduced by the fact that the Motorcycle cannot be seen, which takes time to steal.
Water-repellent sprays can be prepared for regular maintenance.
View detail
![Semi Radial Brake Master Cylinder Kit [Angle Horizontal Φ19]](https://img.webike-cdn.net/catalogue/images/105373/62411_TS.jpg)
For Upgrade of front brakes master
Upgraded TRX850 front brakes master with NISSINsemiRadial brake master.
I opened the package and checked the details and it is very QUALITY and the accuracy is perfect!
Installation on the car body is also completely hassle-free, as the product is guaranteed to fit the car body.
The braking feel is completely different from that of the OEM, with braking power rising quickly from the beginning of the grip and very good control after the grip has been applied.
The design of the product is also compatible with out-of-print cars.
The work kill was set as intermediate because the brake fluid had to be drained once and the air was drained again after installation.
Please refer to the following URL to see the installation work as it is uploaded in the diary.
https://imp.webike.net/diary/251725/
View detail
decent product
I purchased it to mount on my Monkey 125. This is an item that makes your bike more luxurious.
Also, since it cannot be removed without tools, you can prepare for any unexpected situation.
Although it doesn't stand out that much, it is a dress-up item that makes the bike stand out.
Very satisfied. -------------------------------------------------- -------- I bought it to mount it in Monkey 125. It is an item that makes the bike more luxurious. You can also prepare for the situation because you can't solve it without a tool. It doesn't work like that, but it's a dress-up item that makes the bike stand out. I am very satisfied. Powered by Google Translator
View detail
Fits: YAMAHA BirdCity125, YAMAHA NMAX125, YAMAHA CYGNUS X, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ESTRELLA, KAWASAKI ZZR250R, KAWASAKI ZZ-R250, KAWASAKI ZZR250, KAWASAKI ZZ-R1200, KAWASAKI ZXR750R, HONDA CRF100F, HONDA CBR125R, HONDA Ape50, HONDA ADV150, HONDA Ape100, KAWASAKI GPX400R, KAWASAKI GPZ400R, KAWASAKI GPZ900R
Always used Takegawa Drainbolt
Quality and texture information Perfect for installing temperature sensors with magnetic magnets It's good that the color can be used as a point Goods to buy together dn meter, thermometer It's easy to install Better cost performance and comparison to other products WeBike packaging is always great, arriving in a week for delivery and packaging Purchasing concerns, precautions, or advice Care must be taken when installing a product temperature sensor that must be fitted if installing a dn meter or thermometer View detail
Engine might be good ?
This is the first time I tried the Racing plug.
I heard it's Life good.
First of all, the engine starts well. When I lightly stirred the Axel, it seems to turn a little lightly.
I'm looking forward to running the car at full throttle during the next Sports run.
View detail
Replaced from ragged NORMAL
[How is it used?
In use in exchange for OEMFiller cap from SportsCUB
Was the one you received as per Image?
YES, cut-outs are very beautiful, anodized and even.
Was the installation difficult?
Easy to replace with OEM.
How was your experience with it?
No complaints as it's just for looks.
Level gauge becomes unusable and cannot be turned by hand. (You can turn it around if you try hard enough) Although there are some inconveniences such as
[Included Parts:were they on?
O-rings are included, so there is no need to prepare them separately.
[Was there anything that disappointed you?
None in particular
View detail
Purchased for Setting
I purchased this for Setting up a vehicle that I use in Race.
I haven't had a chance to go out yet, but the quality is very good to see and touch in person.
I will also buy the number of Ding that I normally use.
View detail
Power up with AS Uotani
[How is it used?
AS Uotani was installed to strengthen the electrical system of YAMAHA XJR400R.
As AS Uotani's Manufacturer, we recommend the use of NGK Iridium Plug and Power cable together, so we recommend the use of NGK Iridium Plug and Power cable together.
We decided to install NGK Iridium Plug and Power cable in addition to AS Uotani.
Was the one you received as per Image?
It was just as Image.
Since there are four cylinders, a total of four bottles are required.
The price is about 1.5 times that of NORMAL, but the quality is quite good.
Was the installation difficult?
Installation is easy, as it is the same as for a regular Plug.
Gap was adjusted from 0.8mm to 1.1mm for use with AS Uotani.
How was your experience with it?
Power has increased dramatically, partly due to the use of AS Uotani and NGKPower cables together.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
No special requirements.
View detail
It can be used normally
The summer heat is over and the weather is getting cooler, so we decided to replace the Oil Filter Cover O-Ring. This time, we decided to replace the O-Ring of the Oil Filter Cover and purchased one from K-PIT, which was sold at a lower price than OEM. We have been replacing the O-rings on this and Valve's O-rings for about a year now. I know that there are some who replace the O-Ring every time, but I have had no particular problems with the O-Ring after a one-year replacement cycle, so I think it is safe to continue to do so.
As for the product, there was nothing of particular concern when I touched it, and the dimensions were Exactly and exactly in the groove. I will not know for sure until I use it for a while, but I think it is probably a normal usable product that is comparable to the OEM.
View detail
Exactly
Oil replacement was done as the weather became cooler. This time, I replaced the Oil Filter Cover and Valve O-Ring together. I generally replace the O-Ring and Oil Filter Cover after about one year.
The OEM parts were not that expensive, and there was not that much price difference, but I bought the K-PIT ones that were sold at a lower price than the OEM ones. There were no particular concerns about the product, and the dimensions Exactly fit the groove perfectly. I will not know for sure until I use it for a while, but I think it is probably a normal usable product that is comparable to the OEM.
View detail
Fits: DUCATI 1299PANIGALE S, DUCATI 1299PANIGALE R, DUCATI 1299PANIGALE, DUCATI 1199PANIGALE R, DUCATI 1199PANIGALE S, DUCATI MONSTER1200S, DUCATI MONSTER1200, DUCATI MONSTER1100EVO, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821 SP, DUCATI MONSTER696, DUCATI MONSTER796, YAMAHA TRICITY125, YAMAHA TRACER900, YAMAHA TMAX530SX, YAMAHA TMAX530DX, YAMAHA MT-09 TRACER, YAMAHA RZ50, YAMAHA TMAX530, YAMAHA R1-Z
Daytona oil cap
I'm used on honda hornet 250.Good look.perfectly fitted to the oil cap thread.There are small holes for water drain top of the cap.if you need open of close need to use alen key as a tool.recomended for bike enthusiast. View detail
Fits: DUCATI 1299PANIGALE S, DUCATI 1299PANIGALE R, DUCATI 1299PANIGALE, DUCATI 1199PANIGALE R, DUCATI 1199PANIGALE S, DUCATI MONSTER1200S, DUCATI MONSTER1200, DUCATI MONSTER1100EVO, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821 SP, DUCATI MONSTER696, DUCATI MONSTER796, YAMAHA TRICITY125, YAMAHA TRACER900, YAMAHA TMAX530SX, YAMAHA TMAX530DX, YAMAHA MT-09 TRACER, YAMAHA RZ50, YAMAHA TMAX530, YAMAHA R1-Z
Good for protection
Installing it is a straightforward process, and it offers superior safeguarding compared to the original equipment manufacturer (OEM). This product is excellent for both tamper protection and customization, and it comes at a reasonable price. View detail
Fits: KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000SX, KAWASAKI Ninja H2, KAWASAKI Ninja H2 Carbon, KAWASAKI Ninja H2 SX SE+, KAWASAKI Ninja H2 SX SE+, KAWASAKI Ninja H2 SX SE+, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R KRT Edition, KAWASAKI Ninja ZX-10R KRT Edition, KAWASAKI Ninja ZX-14R SE, KAWASAKI Vulcan 1700 Vaquero, KAWASAKI Vulcan 1700 Voyager, KAWASAKI Vulcan 900 Classic, KAWASAKI Vulcan 900 Classic LT, KAWASAKI Vulcan 900 Custom
Genuine Kawasaki Sump Plug Washer for ER-6F 2010
The oil on this bike was due for a change and therefore, we also needed to source a new sump plug and also the washer that goes with it. It is always better to be safe than sorry so you don't have any leaks whilst changing. The part was not super hard to find by simply using the tools Webike provide on their hel pages and to be 100% sure, I also cross referenced with Kawasaki schematics. The price for the washer was really good value and added to the other parts in my order, the shipping worked out really cost efficient too. Shipped by EMS all arrived in 5 days. EMS are good value, very fast in delivering and better than some other couriers. All the items in my order were packed individually by Webike warehouse and all nicely padded out in the box so nothing could get damaged in transit. This washer came in the Kawasaki packaging and are really good quality. They are very well made and no tarnishing was found. The are only washers but as they are essentially crush washers, they are definitely needed. Fitted pretty easily and finished off this rebuild. No danger of a leaky sump plug now. Thank you Webike, great job. View detail
It's still good
I have purchased this Manufacturer's Covers many times and the cost performance is the best.
This time I ordered 3L because I wanted to install a Large Screen on my New Model PCX125, and Large was the right choice.
Rear box is not attached but it seems to hide the LimitWheel.
I will buy the 4L next time.
View detail
Inexpensive, no problems
[How is it used?
Oil Filter was also changed along with Oil replacement of XJR400R.
To be frank, I was happy with anything, so I chose this product based on DAYTONABrand and the low price.
How was your experience with it?
Naturally, there is absolutely no problem with the quality of the product.
How well it serves as a Filter is unknown, but I wonder if there is a Large difference in any Large body product.
This is an oil filter that will not fail if the Torque is observed and tightened securely.
How did it compare to other products?
I also used KIJIMA and Vesra filters based on availability, etc., but none of them were particularly noteworthy.
[Points to note]
Torque management daiji.
【Review】
There is nothing particularly wrong with being inexpensive.
Depending on the car model, the O-ring on the cap portion may be a quantity.:Some of them are set, and I think the Filter is the same there as well, so if you have a car model that has the setting, you can use the Quantity:I think it could be a Set.
View detail
Cell One-Shot Stable Power
I feel a definite spark.
In the summer, even without pulling Chalk.
Engines are applied and stabilized.
The physical acceleration is better, and it is a good part.
View detail
Fits: HONDA ST1100 A, HONDA XL1000V VARADERO, HONDA HURRICANE, HONDA ST1100, HONDA Shadow slasher750, HONDA SHADOWCustom, HONDA Shadow classical, HONDA CB400 SB, HONDA CB400F, HONDA CB400 SE, HONDA GOLD WINGSE, HONDA GOLD WINGF6B, HONDA GOLD WINGF6C, HONDA GOLD WING, HONDA Integra, HONDA Integra, HONDA Africa Twin, HONDA Integra S, HONDA Africa Twin, HONDA XRV650J
Cl500
I bought a Daytona while looking for an oil filter. The outer diameter of 64mm seemed to fit perfectly. I didn't buy it to use it right away. The price was cheap and it was a first-hand product, so I bought it with confidence. The dimensions were not written in detail. Other products also have the product dimensions written on them so that consumers can easily use them. I would like you to know if it is possible ----------------------------------------------------------- -------------- I bought the dayon while I was looking for an oil filter. I think it's perfect for 64mm. I didn't buy it to use it right away. The price is cheap and it is a Japanese product. I want you to know if it can be Powered by Google Translator View detail