Reviews
![Motorcycle Cover KIZUNA [Road Sport (with Cowling) 400-1400cc]](https://img.webike-cdn.net/catalogue/images/43748/kizuna_01_TS.jpg)
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Pretty good
It is not too flimsy and seems to be reasonably durable.
There are holes in the front and back for a chain lock and a belt stopper underneath,
I think the cospa is one of the better ones.
View detail
Additional notes
The customer contacted the manufacturer and told me that the screw threads were cut to make it easier to install the screw threads.
Also, the Mirror vibration suppression parts on the current car etc. are Opposite Thread Screws, so they cannot be installed without removing them, so all Mirror parts must be removed from the Holder.
I think it would be better if it is stated in the product description so that there will be no misunderstandings.
The installation itself was completed successfully. The visibility is a little narrower than OEM, but it looks good so I am satisfied.
View detail
Fits: SUZUKI Intruder LC250 (Intruder), YAMAHA TZR250, KAWASAKI VULCAN 800 CLASSIC (VULCAN900 CLASSIC), KAWASAKI VULCAN 800 CLASSIC (VULCAN900 CLASSIC), KAWASAKI VULCAN 800 (VULCAN400), KAWASAKI VULCAN 1500 CLASSIC (VULCAN900 CLASSIC), KAWASAKI VULCAN, KAWASAKI ESTRELLA (ESTRELLA), KAWASAKI VULCAN, KAWASAKI ESTRELLA (ESTRELLA), KAWASAKI ESTRELLA, KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS (BALIUS), KAWASAKI BALIUS (BALIUS), KAWASAKI ZEPHYR 750 (ZEPHYR)
It is cosy with OEM same etc.
Brake lever of SUZUKI's GRASS TRACKER was replaced because it was broken.
Cosmetics are good, no discomfort, no problems!
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Slightly Larger
I bought this product because the Motorcycle Cover I bought at 2 Rinkan had a small hole in it due to deterioration within a year. It is completely outdoors without a roof. The environment is harsh because it is exposed to the wind.
I put this product on xr as it is, but it is a little Large size. It is a little too large. The total length is 220, so it is between L and LL.
The flapping and scratching were a concern, so I doubled up the Motorcycle Cover I had been using and put it on the bottom, which made things a little better.
The quality and functionality are good, and the price is reasonable, so if it lasts a year, it's good enough.
View detail
Fits: KAWASAKI KLX230, KAWASAKI KLX230, KAWASAKI KLX230, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250XC, KAWASAKI KX250XC, KAWASAKI KX450, KAWASAKI KX450, KAWASAKI KX450, KAWASAKI KX450, KAWASAKI KX450, KAWASAKI KX450XC, KAWASAKI KX450XC, KAWASAKI KX450XC, KAWASAKI MEGURO K3, KAWASAKI MEGURO K3, KAWASAKI MEGURO K3, KAWASAKI MEGURO K3, KAWASAKI NINJA 250
small sacrifice
InHemp palmock is useful for holding up cables, though,
It looks Small dirty.
That's where using OEMClamp fits in nicely with Simple.
You can see it better when you compare them,
It's a very small and unimportant concern,
I think the visual effect is huge if you're looking for a clean fit,
One small part like this can make it look messy or cloaked, or it can make a large difference.
View detail
Fits: YAMAHA YZF-R3, KAWASAKI W800, KAWASAKI Ninja250, KAWASAKI Z650, KAWASAKI ZX-10RR, KAWASAKI Z900RS, SUZUKI V-STROM250, SUZUKI Zixer 250, SUZUKI SV650X, SUZUKI GSX-S750, SUZUKI Hayabusa, YAMAHA YZF-R25, YAMAHA SR400, YAMAHA XSR700, YAMAHA Tenere700, YAMAHA TRACER900, HONDA CRF250 RALLY, HONDA CBR250RRR, HONDA VFR800F, HONDA CB1100
For a simple Cover until departure the next morning.
I was worried whether V-STROM1000XT would be able to fit on it, but it managed to be Large sturdy.
We use it as a simple Cover from the time we finish pre-touring maintenance the day before until we leave the next morning.
So far, I've been working on a regular Motorcycle Cover early in the morning. (sometimes late at night). It took me a long time to remove the bussiness and rustle while being careful of my surroundings, but this Cover is lightweight and compact, so I was able to save time before departure.
I use it as an inner cover inside a regular Motorcycle Cover when I store it after returning from touring. Although stored outdoors, the motorcycle is less likely to get wet due to rain soaking.
Since it is a simple Cover, I don't think it's a good idea to point out what the flaws are. (Then use a regular Motorcycle Cover.) I'm not sure if it's a matter of caution or preparedness.
Of course, it is vulnerable to rain. It gets wet. If you put a cover on your car, you will have a hard time cleaning up the wet cover when you go out.
View detail
Fits: その他 , DUCATI Scrambler icon, DUCATI 1299 Panigale, BMW R1200RS, BMW S1000RR, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI GSX1000S KATANA, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1400, SUZUKI GSX250R, SUZUKI ST250E Type, TRIUMPH street scrambler, SUZUKI Bam Bam 200, SUZUKI Bandit 1250, SUZUKI Vstrom 1000, SUZUKI Vstrom 250, SUZUKI Glass Tracker Big Boy, SUZUKI V-Strom 650
It looks cute and soothing!
I bought this to hide a Fastener scratch on my Tank and to prevent future scratches.
It looks cute and the fact that you can choose your own position for the back eyes is great!
I am concerned that it will get wet in the rain and fall apart, but so far I have been able to use it without any problems, partly because I have the Cover on!
View detail
Fits: KAWASAKI NINJA 1000, KAWASAKI MEGURO K3, KAWASAKI MEGURO K3, KAWASAKI 1400GTR ABS, KAWASAKI 1400GTR ABS, KAWASAKI NINJA 1000 ABS, KAWASAKI NINJA 1000 ABS, KAWASAKI NINJA 1000, KAWASAKI NINJA 1000, KAWASAKI NINJA 1000, KAWASAKI NINJA 1000, KAWASAKI NINJA 1000 ABS, KAWASAKI NINJA 400 ABS, KAWASAKI NINJA 400 ABS, KAWASAKI NINJA 400 ABS, KAWASAKI NINJA 400 ABS, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400
Genuine Kawasaki Oil Filter OEM for NINJA ZX-10R
The filter was easy to find, it also fits quite a few different models so is readily available. The price was really good, and still better than could source locally for the same Kawasaki part. As I always have more than one part in each order, the cost of shipping is really good. I generally use EMS Fast service as it gets to me very quickly and the tracking is full, I mean full as in every step of the journey. I know exactly when the order will be delivered, the delivery has always been on time. Every part in the order was well packaged as expected and the outer box was sealed on all sides so none of my smaller parts could escape. There is not really much to say about the finish of this oil filter as there is not really much you can see, the paint is clean and the threaded part is super smooth. The seal is intact and no tears, rips of dinks. Nothing is bad with Kawasaki oil filters at all. Never had any problems. The paint on the outer is really good and no runs or blemishes on it at all. The filter threaded on really easily and obviously, with any oil filter change, a small amount of oil on the end just to help seal.Fitted in no time at all and filled the oil in the engine. Runs really well and with the new oil, sounds a lot better than it did. Happy customer. Thank you Webike for all your help with the order contents. View detail
![PREMIUM ZONE Filler cap [M30XP1.5]](https://img.webike-cdn.net/catalogue/images/15903/91914_1_TS.jpg)
Fits: KAWASAKI GPZ900R, KAWASAKI VERSYS-X 250, KAWASAKI Z1000 (water-cooled), KAWASAKI Z250 (2013-), KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400II, KAWASAKI ZXR250R, KAWASAKI ZXR400, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR250, KAWASAKI ZEPHYRX, KAWASAKI NINJA250R, KAWASAKI NINJA2 Helmet50RR, KAWASAKI BALIUS2
it's the best
I don't know how durable it is since I just installed it. It looks great, but it would be even better if it were a little cheaper. View detail
Mt. Screw is ….
After purchasing, opening and checking the package, Mt. Screw is Quantity.:Pair (for Left and Right) The two are both crushed and cannot be installed.
There are several similar postings in other people's Reviews, which shows the quality of this Manufacturer's products.
Either the manufacturer is bad or the manufacturer is bad… Either way, it's a disappointment. You might want to look at the Review carefully before you consider buying it. Is there a hit ha Gap? It should not be there in the first place….
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Joint link in Chain
I bought RossiMODEL's Chain, but only LINK was fluorescent yellow color, so I bought Silver color as same as other LINK.
I haven't put it on yet, but I think it will be a calming color scheme.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, BMW G650 Crossmoto, BMW K-1 (Japanese kick-boxing promotion), BMW K1100SR, BMW K1300R, BMW K1300S, BMW K75, BMW R1200R, BMW R80, BMW S1000RR, DUCATI 1000, DUCATI 800, DUCATI 999S, DUCATI 999SS, DUCATI Monster1000, DUCATI Monster1100, DUCATI Monster1100S, DUCATI Monster800
There's some kind of seepage...
Used for outdoor storage.
When I removed the Cover and checked the Motorcycle after it rained, there was some White Stain on it...
Apparently, every time it gets wet, this Cover's Waterproof (Fire protection?) The ingredients seem to be seeping out.
Fortunately, the stain is easily removed with water, but it is too much of a hassle to have to wipe it off each time, so I would not repurchase.
Also, it is pretty peLePera and has a lot of room in the Size, so it flops around a lot when a strong wind blows.
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLD'OR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX
It was EXACTLY what I expected.
The Motorcycle storage area has a roof, but it is inevitably blown in from the side, so we replaced it with a new one,
The product description indicated that it was not suitable for cars with boxes, so I was prepared to remove the box before applying the cover, but when I tried it, the size was sufficient without feeling too tight.
The fastener is located in the right place, so it is easy to hang the cover and change the large size. When not in use, it can be stored by hanging it on the Hook, so there is no need to worry about it getting dirty from contact with the ground, which also makes it much easier. It may be a trivial matter, but I think I will be able to feel much better if I can save labor on these troublesome things.
The fabric felt a little thin, but on the other hand, I felt it was easy to handle without feeling stiff.
Motorcycle is Z900RS CAFE with SHAD23 side case. Please refer to the following images for reference.
View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
I've always loved it.
It is thick and easy to grip, and I have been using it for a long time. View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Firm and direct feel
I bought these to replace softer "comfort" grips the previous owner installed. Immediately, I noticed an improvement in fine throttle control, and feel more certain of my hand positioning. The material feels firm and provides high grip. I imagine it would perform well in wet weather, too. I would recommend these grips to those who prefer a "direct" feel. View detail
Fits: YAMAHA YZF-R3, KAWASAKI W800, KAWASAKI Ninja250, KAWASAKI Z650, KAWASAKI ZX-10RR, KAWASAKI Z900RS, SUZUKI V-STROM250, SUZUKI Zixer 250, SUZUKI SV650X, SUZUKI GSX-S750, SUZUKI Hayabusa, YAMAHA YZF-R25, YAMAHA SR400, YAMAHA XSR700, YAMAHA Tenere700, YAMAHA TRACER900, HONDA CRF250 RALLY, HONDA CBR250RRR, HONDA VFR800F, HONDA CB1100
It was a little small for V85TT.
I was looking for something that I could use on my YamahaTREACER900, but it was too small for my V85TT.
The handlebar width, Mirror to Mirror, was pulled down and the total length was shortened by the width of the handlebar. Especially, MOTO GUZZIOEM's Pannier case is large, and when it is attached, the width is almost the same as the width of the Handlebar, about 90cm wide.
The material is firm like Tent fabric, and I think it can be used enough if you can find a way to fasten Strapetc.
The reason I gave it an All 5 in the detailed evaluation is not the fault of the Manufacturer, but because I made a spur-of-the-moment purchase of my own. Do not hesitate to contact me for further information (Lol)
View detail
Fits: KAWASAKI Z250, KAWASAKI Ninja250, SUZUKI BURGMAN400, TRIUMPH TIGER1050, YAMAHA TZ50, SUZUKI BURGMAN400, SUZUKI BURGMAN200, HONDA XR100Motard, HONDA NS50R, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI DR800S, KAWASAKI ELIMINATOR 125, KAWASAKI Z400, KAWASAKI Z400, KAWASAKI Z250SL, KAWASAKI Z250SL
This is recommended for the Rear brake
All motorcycles use the Red Pad for the Front because it is easier to brake, and the Rear because it is less effective than the Front. I have never installed this pad on the front of my motorcycle because I would fall over if the pad was applied too hard on a normal road, even if it is used on a circuit. The image that it works too firmly is prevailing. Also, it is not recommended to use this Pad for daily foot because of its high disc-aggressiveness. View detail
Fits: SUZUKI GSR750, YAMAHA XJR400R, YAMAHA XJR400, HONDA GROM, HONDA CB400SF Revo, HONDA CB400SF vtecIII, HONDA CB400SF vtecII, HONDA CB400SF vtecI, HONDA CB400SF, HONDA CB1100EX I, HONDA CB1100EX, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1100, HONDA CB1100 I, HONDA CB1100RS, HONDA NC700S, HONDA CB400SB vtecIII, HONDA CB400SB Revo, HONDA CB250F
change one's mood
[How is it used?
I wanted to make it Cafe racer style … but it is hard to have back pain and I don't want to remove the Top Bridge or change the Hose … so I bought it with a half-hearted and he-sauce idea.
Was the one you received as per Image?
Looks quite sturdy.
Was the installation difficult?
The installation itself is not that large, as it is simply attached to the NORMALBundle Bracket and does not require hose replacement. However, since there are many parts that can be adjusted such as hanging angle, height, width, etc., it took time to set the position of the tank and lever/switch box so that they do not interfere with each other, and to set the desired position. And while I was adjusting the position, I got a lot of scratches….
How was your experience with it?
If you can also use Bundle locks, it ends up not much different from NORMAL in terms of height, etc. But I am satisfied with it.
[Included Parts:were they on?
(after the -te form of a verb) not ..
[Was there anything that disappointed you?
If only the price were lower!
View detail
Fits: YAMAHA XJR400R, HONDA MONKEY, HONDA HORNET250, HONDA APE 50, HONDA APE 50, KAWASAKI ZRX400II, KAWASAKI ESTRELLARSCustom, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX400, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI W800, KAWASAKI W400, HONDA MONKEY, KAWASAKI 250TR, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA TW200E, YAMAHA TW225E
Handlebar replacement for SV650!
For handlebar replacement, it is necessary to drill a hole to hold the switch in place.
The SV is even more compact than the OEM because it is 1~2 cm shorter on the One Side.
The aperture angle is larger than OEM and the handlebar height is a few millimeters higher than OEM.
I think it is the best handlebar for me, although it is hard to say because each person has a different body shape and riding posture.
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLD'OR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX
Does not melt properly
I have not used it that many times yet, but I put it on right after I finish a run and it doesn't melt.
Use is also quite easy thanks to Rear's Fastener.
The price is also on the cheaper side of Body cover, so I am satisfied.
I am concerned that it is a little thin, but …….
Now I'm hoping for durability.
View detail