Reviews
Fits: HONDA LEAD 100, HONDA LEAD 100, HONDA LEAD 50, HONDA LEAD 50
Poor Webike support
I order a product, but I can't proceed because I'm checking with my supplier.
That sucks.
If you can't do business, then stop.
View detail
Fits: KAWASAKI ZRX1200 ZR A7F, KAWASAKI ZRX1200 ZR A8F, KAWASAKI ZRX1200 ZR A8FA, HONDA CB400SB ABSSpec. Model:EBL-NC42, HONDA CB400SB, HONDA CB400SF ABSSpec. Model:EBL-NC42, HONDA CB400SF, HONDA CREA SCOOPY Model:JBH-AF55, HONDA CREA SCOOPY i Model:BA-AF55, HONDA DIO4st CESTA Model:JBH-AF68, HONDA DIO4st, HONDA FORESIGHT, HONDA GYRO X Model:JBH-TD02, HONDA GYROCANOPY Model:JBH-TA03, HONDA HORNET250, HONDA LEAD100 Model:EBJ-JF19, HONDA MAGNA50, HONDA PS250, HONDA SHADOW400 Model:BC-NC34, HONDA SPACY125
This is a part that is often cut unexpectedly.
I didn't notice that the meter bulb was out in the always-on CUB, and I couldn't see the meter when I entered the tunnel. When I disassembled it, it was a broken bulb.
good point
Once you replace it, it will last for a while. High durability.
The light bulb is made by Manufacturer OEM, so you can use it with confidence.
In the case of CUB, it is more common to simply have a broken bulb than a Fuse, and since it is only a bulb replacement, it can be fixed on a low budget.
A bad point
As you can see in the picture, the Headlight is full of Wiring, so it is troublesome to replace. It's not difficult but troublesome.
The brightness of the meter bulb is not that much brighter than other motorcycles, so you won't even notice if the bulb is out, but it's better to replace it before it becomes a large problem like short or broken.
View detail
Fits: SUZUKI Address V100, SYM RY125i, APRILIA SPORTSCITY CUBE 250iE, SUZUKI zzz, KYMCO V-Link125, KYMCO VITALITY50 4T, KYMCO RACING125 FI, KYMCO GD250Z, KYMCO GD250Z-125Z, KYMCO GD125Z, KYMCO DINK 200, KYMCO DINK125, KYMCO CAPTURE125, KYMCO AGILITY125, KYMCO AGILITY50, HONDA Lead 90, HONDA Lead 50, HONDA Lead 100, HONDA Lead 110., HONDA forza
Reasonable and good Cover
I use it on my GSX-r125.
I bought it because it was inexpensive, had a keyhole, and I wanted it to be waterproof.
It was cheap, so I felt like I could just buy it again if it got ruined. But it was better than I expected!
good point
Cheap for a Cover.
It's thin so it's not bulky.
The ultraviolet rays will Cut.
It has a keyhole, so you can cover and lock it.
A bad point
It's not good for shock.
I've been using it for a year and haven't had any problems at all.
I think it will last a couple of years easily.
The point to note is that after driving, the body will be hot, so please leave it for a while and cover it. Because it melts.
View detail
Fits: HONDA CUB [Cub]., HONDA CUB [Cub]., HONDA CUB90 [Cub]., HONDA GROM [grom]., SUZUKI ADDRESSV100 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI BIRDIE [Birdie]., SUZUKI Birdie 50, SUZUKI Birdie 50, YAMAHA GEAR [gear]., YAMAHA Town MATE90 [Mate]., YAMAHA News MATE [Mate]., YAMAHA News MATE80 [Mate]., YAMAHA News MATE90 [Mate]., SUZUKI DF125, HONDA APE100 [Ape].
How durable is it?
I used it on my CYGNUSX. I didn't feel anything special at first, but after a little over 4 months of use.
I'm not sure if this is a problem or not, but I'm not sure if this is a problem or not. The problem of riding frequency
I think there may be some, but they are not durable. I'm thinking of replacing it soon.
View detail
Fits: HONDA gyro canopy, HONDA GYRO, HONDA DIO, HONDA LEAD 100, HONDA GYROX
Used for Gyro up
It is being used as an Oil pumpSeal for Honda GyroUp!
This is helpful because there are no settings in OEM Parts
Now I'm wondering how durable it will be.
View detail
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
Fitted Exactly
I don't know how it feels to use it, but I bought it because I thought it would make maintenance easier without having to worry about Rust.
On my MT07 2016 without ABS, I have no issues at all with installation.
View detail
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
Convenient
I use it on my RearCaliper.
I wasn't looking for firmness, but to use a slotted screwdriver.
I didn't like it, so I replaced it.
Thanks to this, I can use it without worrying about licking it.
View detail
Fits: SUZUKI Sky Wave 400, SUZUKI Sky Wave 250, SUZUKI Sky Wave 250, SUZUKI RM250, HONDA Lead 50, HONDA Lead 100, HONDA Spacey 250 Freeway, HONDA Spacey 125, HONDA XLR250RH, HONDA XLR250RF, HONDA MTX200RII, HONDA FTR, HONDA FTR250, HONDA FTR250, HONDA 223D
The performance is comparable to OEM.
I used it to maintain my FTR223 which I got from a friend but neglected. it is very helpful to have cheap and proper parts because OEM parts are hard to get. I test rode it and it was as good as the OEM Pad! View detail
Fits: YAMAHA Cygnus 125X SR, YAMAHA Cygnus 125X, YAMAHA Cygnus 125, YAMAHA Grand Axis, YAMAHA Axis Street, YAMAHA Axis 90, SYM RV180JP, SYM RV125JP, SUZUKI Vexter 150., SUZUKI Address V125S, SUZUKI Address V125G, SUZUKI address V125, SUZUKI Address V100, PIAGGIO Runner 200VXR, KYMCO XCITING250, KYMCO GRAND DINK250Z, HONDA Lead 50, HONDA Lead 90, HONDA Lead EX, HONDA Lead 110.
Just size, but …
The size is perfect, but the strap comes undone in strong wind, so it would be nice if it could be improved to a belt type clip stopper. View detail
Fits: HONDA Elite 80, KYMCO Agility 125, KYMCO Kahlo 50, KYMCO Kahlo 50 II, KYMCO Capture 125, KYMCO Super 8, YAMAHA TT-R125, YAMAHA TT-R125LW, YAMAHA TT-R125LWE, YAMAHA XVS125 Dragster, YAMAHA YF80M, YAMAHA YFA-1, YAMAHA YFA125, YAMAHA YM80M, YAMAHA nouveau, HONDA CB125T, HONDA CRF100F, HONDA CRF80F, HONDA SCV100 Lead, HONDA TRX70
Whoever's spinning, move up.
I used to use OEM #6 and it burned too much and melted the Valve on the Head.
So I raised the count and responded.
Torque will go up when you Bore up, but it also puts more load on the engine, so it's better to adjust the Plug as well.
good point
Easy to exchange
It's a OEM Type, so it's cosy.
You can feel the effect from Idling to driving.
A bad point
No, it is not. Please replace it frequently.LargeEssential to keep your car running at its best.
It's not a Tune, it's more of a tweak, and I think the Plug replacement works great, so give it a try!
View detail
Fits: YAMAHA Remote controller jog, YAMAHA TOWN MATE, YAMAHA Box, YAMAHA VINO(2Cycle), YAMAHA JOG APRIO, YAMAHA JOG POCHE, YAMAHA YV50 Z II, YAMAHA Axis Treat, YAMAHA GRAND AXIS, YAMAHA CYGNUS X, HONDA DIO, SUZUKI VECSTAR150, SUZUKI VERDE, SUZUKI LETS4, SUZUKI LETS5, HONDA LEAD 100, HONDA LITTLE CUB, HONDA LIVE DIO, HONDA FREEWAY, HONDA Byte
Cosmetically satisfactory.
I replaced the Grip of SEA BASSLETS4.
It was easy to work with, although it required a little effort.
However, the Axel side of the OEM Parts has a covered part on the inside, so it cannot be covered there.
For now, it's easier to grip.
View detail
Fits: KAWASAKI KSR-I, KAWASAKI KSR-II, KAWASAKI KS-II, KAWASAKI KSR-110, KAWASAKI Z125PRO, SUZUKI LETS II-S, SUZUKI SEPIA ZZ, SUZUKI SEPIA RS, SUZUKI ShotS, SUZUKI Address Tune, SUZUKI AddressVTune, SUZUKI ADDRESS V50, SUZUKI Address50, SUZUKI ZZ, SUZUKI HI-UPR, SUZUKI GAG, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS110, SUZUKI ADDRESS110
Well, that's about right. (o-ro-o)
The Black Motorcycle Cover is actually more discreet than you might think at night, and it's all right for security. (^_^) /
My previous one in the same price range from DAYTONA came tearing apart after about 3 years, so I'm replacing it!
I think the price is right for a 40 year old moped, and the price is right for a 40 year old moped;
I'm very pleased with the quality of the product and the price.
View detail
Fits: HONDA Elite 80, KYMCO Agility 125, KYMCO Kahlo 50, KYMCO Kahlo 50 II, KYMCO Capture 125, KYMCO Super 8, YAMAHA TT-R125, YAMAHA TT-R125LW, YAMAHA TT-R125LWE, YAMAHA XVS125 Dragster, YAMAHA YF80M, YAMAHA YFA-1, YAMAHA YFA125, YAMAHA YM80M, YAMAHA nouveau, HONDA CB125T, HONDA CRF100F, HONDA CRF80F, HONDA SCV100 Lead, HONDA TRX70
Reliable OEM Quality
My son became a small student and I gave him a TTR50. The father of the motorcycle shop in the neighborhood gave it to me, and it is running well. Because it is not easy to notice the deterioration of the plug in the 4-stroke, let's exchange it once in one year. You can feel the torque up after replacement. View detail
Fits: YAMAHA YFM80W, YAMAHA YFM50, YAMAHA YFA125, HONDA CB250, HONDA CB250 LACustom, HONDA ATC70, YAMAHA YFA-1BREEZE, YAMAHA TT-R125LWE, YAMAHA TT-R50E, YAMAHA XTZ125, YAMAHA XVS125DRUG STAR, YAMAHA YB-1 FOUR, YAMAHA YB50, YAMAHA YF100M, YAMAHA YF80M, YAMAHA YFA-1, HONDA XLR80R, HONDA XL80S, HONDA TRX70, YAMAHA RENAISSA
Believe the rumors.
I changed to Windshield IRIDIUM because my D Tracker 125 was covering a lot. I don't know about the power because I don't have a keen sense to feel it. According to the manufacturer, it seems to have a long life, so I think it is worth double the price for now. View detail
Fits: HONDA XR50 MOTARD, HONDA APE 50, HONDA MONKEY, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA CD50, HONDA BENLY50S, HONDA CL50, HONDA JAZZ, HONDA GIORCUB, HONDA solo, HONDA APE 100, HONDA XR100MOTARD, HONDA SUPER CUB110, HONDA DIO, HONDA SUPER DIO, HONDA LIVE DIO, HONDA G DASH, HONDA Giorno
worth it
this kitaco kit it worth it for minibike, high C/P value, and easy to install, and the quality is best, i recommend minibike to install it View detail
Fits: HONDA gyro canopy, HONDA GYRO, HONDA DIO, HONDA LEAD 100, HONDA GYROX
For LIVE DIOZX
When I received the first one that was sent to me that was different from the size listed, I noticed it when I tried to assemble it with Rose.
When I contacted We-Big, they responded immediately and this time I was able to assemble it successfully.
I had the work done at the motorcycle shop and removed the Seat and the box under the Seat and the intake system to the intake manifold, which looked surprisingly easy.
After Rose, I found out the difference in size, so I had to pay twice for the labor, but …
I got an email asking me to write an impresario, so I'm writing
It's a warranty of conformity, but it didn't give me any Points.
View detail
Fits: HONDA Elite 80, KYMCO Agility 125, KYMCO Kahlo 50, KYMCO Kahlo 50 II, KYMCO Capture 125, KYMCO Super 8, YAMAHA TT-R125, YAMAHA TT-R125LW, YAMAHA TT-R125LWE, YAMAHA XVS125 Dragster, YAMAHA YF80M, YAMAHA YFA-1, YAMAHA YFA125, YAMAHA YM80M, YAMAHA nouveau, HONDA CB125T, HONDA CRF100F, HONDA CRF80F, HONDA SCV100 Lead, HONDA TRX70
Incredible Toughness.
Once a year, about once every 25,000?miles, but I've only changed it twice in two years at about 50,000?miles, and it's been running normally and well?
I can't think of a second strike, but it's a quintessential NGK.
View detail
Fits: HONDA XR50 MOTARD, HONDA APE 50, HONDA MONKEY, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA CD50, HONDA BENLY50S, HONDA CL50, HONDA JAZZ, HONDA GIORCUB, HONDA solo, HONDA APE 100, HONDA XR100MOTARD, HONDA SUPER CUB110, HONDA DIO, HONDA SUPER DIO, HONDA LIVE DIO, HONDA G DASH, HONDA Giorno
A little. The opening has changed.
The OEM Throttle requires a regrip to fully open the Throttle.
"A little ride. If it is, well, that's fine, but if this is a long distance Two, I can't stand it.
It is worn to reduce the range of motion in the wrist and to reduce fatigue as much as possible.
The High Solo isn't just for running fast on anything!
As a result, the opening has improved a little. But I am not satisfied with it. But I am not satisfied.
This is a great option for those who just need a little improvement on the current situation.
View detail
Fits: YAMAHA Cygnus X, YAMAHA YZ250F, YAMAHA YZ85, YAMAHA SRX600, YAMAHA TW200, YAMAHA SR500, YAMAHA SRX400, YAMAHA SR400, YAMAHA DT200WR, SUZUKI Glass Tracker Big Boy, SUZUKI Avenis 150, SUZUKI address V125, SUZUKI RMX250S, SUZUKI RMX250, SUZUKI RMX250, SUZUKI RM85, SUZUKI RM250, SCORPA TY-S125, KTM freeride 250r [freeride]., KTM 85SX
I feel the effects.
Installed on the ADDRESSV125g CF46A
After I installed it, the Idling sound became large and I felt a change.
I haven't quite figured out the Fee Ring when driving.
I feel like the speed in the high speed range has increased.
View detail
Fits: HONDA DAX, HONDA MONKEY, HONDA LEAD, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gyro canopy, HONDA Lead 100, HONDA Spacey 125, HONDA Shirley 50., HONDA DAX, HONDA MONKEY, HONDA LEAD, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gyro canopy, HONDA Lead 100, HONDA Spacey 125, HONDA Shirley 50.
There's no doubt about it.
Recently, I found out that the brake on my Monkey has been listening badly and I hadn't replaced it in 10 years and I found out that DAYTONA stopped working well. But the bad effect was the sound of Brake. After much consideration, I decided to go with the expensive OEM. After installing it, it worked very well. The stable performance is very good. View detail