Reviews
Fits: HONDA MONKEY, HONDA DREAM50, HONDA GORILLA, HONDA APE 50, HONDA XR50 MOTARD, HONDA XR100MOTARD
The breather cap is a work of art to look at in it's design and finishes
About quality and texture - The breather cap from SP Takegawa is made from billet aluminium with precision machining and an anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The breather cap is a work of art to look at in it's design and finishes and combined with an oil catch tank has resolved my engine oil loss caused from high RPM riding by allowing the oil vapour generated during this period of riding to be directing back to the engine via the clutch cover. Products to buy together - A key product to buy together with the breather cap is a oil catch tank that will allow for the collection and separation of the oil from the vapour output from the engine. Difficulty of installation - The installation of the breather cap is a simple task that took 0.2 of an hour to complete. Common sense and the use of basic hand tools is all that is required to secure the breather cap to the clutch cover. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the breather cap is no different. The design of this breather cap with it's rotating barbed hose fitting is what sets it apart from the others. About shipping and packaging - With there being no cost difference between sea freight and EMS for the breather cap, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Monkey 125 but the range is very limited. View detail
C125 is the best choice
I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and the brand Kitako was trustworthy.
You won't feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. -------------------------------------------------- -------- I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and I trusted the brand Kitako. You may not feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. Powered by Google Translator
View detail
Genuine DID 420NZ3 Gold Spare Chain Link
I do not really use these too often as they are basically one step up from a push bike chain anyway. But, it is always good to have them in stock just in case a customer needs one. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Did not fit.
The conformity information is incorrect. I was disappointed because I purchased it on faith. View detail
Good looking!
The OEM filler cap on my CB400SF had deteriorated and was not looking good, so I replaced it.
I purchased this product because the Ditona product was good in terms of Cost. Installation was a simple task of removing and replacing the OEM, but I was a little concerned about the ORing being a little loose, but there are no oil leaks, so I think it is a good idea.
View detail
I put it on my RG 50Gamma.
It's just like changing a light bulb.
There is no problem
View detail
SP TAKEGAWA discharge bolt (w / magnet)
What are you waiting for? What are you waiting for? I want to know what I want to know. I want to know what I want to know.
Although it is not a visible part, this product is really good in that it can filter out iron powder inside the bike. The finish and design are wonderful. Thank you for the quick delivery. I would recommend this product to others. -------------------------------------------------- -------- It's not something you can see, but it's really nice to have this product to filter out the grit from the inside of the bike. The finish and design is great. Thank you for the prompt delivery. I would definitely recommend this product to others. Powered by Google Translator
View detail
KITACO Drive Sprocket (Front)
It has good quality that can replace the genuine product.
Kitako products are popular with many buyers and are of excellent quality.
Considering the low cost and long durability, it would be difficult to choose a better product than this product.
I will continue to use this product and thank you for allowing me to use this great product. -------------------------------------------------- -------- It has good quality that can replace the genuine product. Kitako products are popular with many buyers and are of excellent quality. Considering the low cost and long durability, it would be difficult to choose a better product than this product. I will continue to use this product and thank you for allowing me to use this great product. Powered by Google Translator
View detail
A well designed product that integrates into the factory engine case to add a useful feature
About quality and texture - The drain bolt with magnet from SP Takegawa is made from billet aluminium with precision machining and a red anodized surface finish while the quality from the overall fit and finish is perfect. About the feeling of use - The drain bolt with magnet is a well designed product that integrates into the factory engine case to add a useful feature that helps with engine longevity by removing unwanted metal from the oil. Products to buy together - A key product to buy together with the drain bolt with magnet is the SP Takegawa LED temperature guage that will allow for monitoring of the engine oil temperature to ad further longevity of the engine. Difficulty of installation - The installation of the drain bolt with magnet is a simple task that took 0.2 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the drain bolt with magnet to the engine case. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for but the drain bolt with magnet is priced higher this time round. The design of this drain bolt with magnet with it's sensor hole is what sets it apart from the others. About shipping and packaging - With there being no cost difference between sea freight and EMS for the oil filter cover, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very basic. View detail
Cosmetically good.
This is the only Sprocket that I can think of. I use the same number of pins. I use the same number of pins, and as a matter of course, I have no problems. View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D
Axle guard by SHIFT UP
Grom (JC92) I installed it in
Material:With DURACON, it came off from the base when it fell over and had to be replaced even though it was still usable and worn out, but Material:With aluminum, you don't have to worry about that, so you can use it for a long time.
I am very satisfied with the price and the color selection.
View detail
good stars
Звезда 15 звёзд от Kitako как всегда отличного качества, беру уже не первый раз. Пользуюсь и наслаждаюсь как она чётко работает. Подходит как оригинал. Работает чётко.
The star of 15 stars from Kitako is, as always, of excellent quality, it's not the first time I've taken it. I use and enjoy how it works clearly. Fits like the original. It works clearly.
----------------------------------------------------------
The star 15 stars from Kitako as always of excellent quality, I have been taking it for the first time. I use and enjoy how it works clearly. Suitable as the original. It works clearly.
The Star of 15 Stars from Kitako is, As Always, of Excellent Quality, It's Not the First Time I've Taken It. I Use and Enjoy How It Works Clearly. Fits Like the Original. It Works Clearly.
Powered by Google Translator
View detail
For normal use, there is no problem at all.
The engine power is small, so the Driven Sprocket, which had been set at 15T to increase one step closer to the maximum speed, has been changed to standard in order to give priority to ease of use in the practical range. (OEM) I screwed up the head of the bolt by setting the torque wrench to 20Nm by mistake when I changed it back to 14T. (Reflection)
Well, since I have another Bolt and the threaded Bolt core is still there, I thought that the fixing plate would not come off and I could ride it for a while until a replacement Sprocket arrives. (Lol)
I kept it for about a month without any problem, and I bought a M6×10mm Stainless bolt to make a new Bolt, and replaced it with this KITACO Sprocket.
The OEMBolt does not have screws cut under the head to prevent the bolt from hitting the casing, so we used a washer to replace the thickness of the bolt that does not have screws cut. I should have bought an OEMBolt, but I didn't know the part number because I don't have the Parts List.
View detail
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
When I changed to LED Bulb.
LED Bulb light now illuminates the front of the car. View detail
Easy-to-use Handlebar
I used it on 3 different vehicles. I used this handlebar on 3 different vehicles and it worked well even though the vehicles were of different sizes. cb400sf can pass the inspection as it is. View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Used in xr100 MOTARD
I bought this product because the OEM Product was too dark when I switched to LEDs for the Valve, and the forward illumination is much brighter than the Normal. View detail
exchange
I purchased a new Sprocket to replace the Chain with a new one.
The price is reasonable and helpful.
View detail
The ball joint could be a little stiffer from the start….
The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …)
View detail
Fits: SUZUKI 250SB, SUZUKI DJEBEL250XC, KAWASAKI KLX140L, KAWASAKI KLX450R, KAWASAKI KLX300R, KAWASAKI KLX250, KAWASAKI D-TRACKER125, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER X, KAWASAKI VERSYS-X250, KAWASAKI VERSYS-X250 TOURER, KAWASAKI VERSYS-X300, KAWASAKI KFX450R, KAWASAKI KFX700, SUZUKI RMX250S, SUZUKI DR250R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250L(S)
Red is Fashion!
Can be installed with a single screwdriver.
Recommended for dress-up appearance.
Packing was reused.
View detail