Reviews
Fits: HONDA CB250F, HONDA 400X, HONDA 400X, HONDA CB400F (2013-), HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA VTR250, YAMAHA Majesty S, YAMAHA Majesty S, HONDA GROM, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR
Pros and cons of locking with a key
Installed on pcx 125 jk05.
Installation is very easy as it is co-tightened to the Master Cylinder, and the limited space around the handlebar is good as it does not kill the space around the handlebar.
In addition to Helmet lock, it can also be used as a Convenient Hook.
I purchased this Type product that locks with a key for its security performance, but I find it troublesome to open and close the key every time.
I also find the increase in keys to be depressing.
This is a good product for people who don't mind having more keys and locking and unlocking them each time.
It doesn't hurt to have it on.
View detail
Fits: HONDA CBR125R, YAMAHA MAJESTYS, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA dunk, HONDA FORZA Si, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA PCX150, HONDA glom, HONDA PCX HYBRID, HONDA PCX150, HONDA PCX150, HONDA CBR250R, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA CBR250R
Convenient for hanging a small shopping bag or Helmet.
I purchased Red.
I installed this on my pcx 125 jk05. I like the fact that the limited space around the handlebar is not sacrificed since it is tightened to the master cylinder and does not require any extra mounts.
It is solidly built and has a good texture.
As it is called a "Convenient Hook," it can be used with no problem if it is just a small bag of groceries at Convenience.
Bags purchased in SUPER large quantities can also be hung, but please note that the foot space will be cramped.
It is also convenient to hook the D Ring of the Helmet during Small breaks.
I think it is such a Must-have item that Scooter should make it a Standard Equipment.
View detail
ZOOMERX
Finally installed.
It is not popo-popo and noisy, which is good.
However, I wonder if it's just me, but sometimes the engine stalls or the plug is covered, so I wonder if I should change the air cleaner or the plug.
Can someone please tell me what is going on?
View detail
Fits: YAMAHA Tricity155, YAMAHA NMAX155, HONDA CB500F, HONDA CB500X, HONDA CBR500R, YAMAHA VINO, YAMAHA MAJESTYS XC155, YAMAHA DELUXE, YAMAHA TRICITY125, YAMAHA TRICITY125ABS, YAMAHA JOG, YAMAHA TRICITY 155 ABS, YAMAHA NMAX 155, YAMAHA NMAX, YAMAHA FJR1300 A, YAMAHA FZ16, YAMAHA FJR1300 AS, SUZUKI V-STROM650, SUZUKI V-STROM650 XT, SUZUKI SV650X
Looks effective.
After the replacement, the exhaust sound seems to be stronger.
I don't know which effect it is because it was replaced at the same time as the power cable, but the low speed has improved to the point that I can feel it.
It is expensive, but I'm glad it is within my budget because it is a Single engine.
View detail
Fits: HONDA CB250R, HONDA MONKEY125, HONDA CBR250RR, HONDA CB300R
Highly satisfying
Tension is increased because the location is clearly visible while driving.
ScrewQuantity for installation:It is very easy as it is only 2pcs.
View detail
Fits: HONDA ZOOMER-X, HONDA PCX, HONDA PCX HYBRID, HONDA LEAD125, HONDA LEAD110, HONDA SUPER CUB110, HONDA SPACY125, HONDA SPACY100, HONDA GYRO CANOPY, HONDA CROSSCUB110, HONDA XL230, HONDA PCX150, HONDA PCX150, HONDA FTR・223D, HONDA DIO110, HONDA CB223S
SUPER CUB110 for big Drum
I bought it because of the good reviews from others.
When I changed the front tire of my SUPER CUB110JA44 to a JA07 one that I bought at a flea market site, I also changed the Brake Shoe.
Even an amateur could replace it after studying it on youtube video.
It seems to have created a sense of security for the former Brake.
View detail
Fits: YAMAHA Tricity155, YAMAHA NMAX155, HONDA CB500F, HONDA CB500X, HONDA CBR500R, YAMAHA VINO, YAMAHA MAJESTYS XC155, YAMAHA DELUXE, YAMAHA TRICITY125, YAMAHA TRICITY125ABS, YAMAHA JOG, YAMAHA TRICITY 155 ABS, YAMAHA NMAX 155, YAMAHA NMAX, YAMAHA FJR1300 A, YAMAHA FZ16, YAMAHA FJR1300 AS, SUZUKI V-STROM650, SUZUKI V-STROM650 XT, SUZUKI SV650X
I can recommend it to all Riders who love GSX-R125.
It is a magical plug that combines low speed torque up and high RPM smoothness, just like the old racing plugs. It is hard to believe that this is a register plug, and I could feel the high performance several times better than Windshield IRIDIUM. It is also very durable, and I do not feel any deterioration at all even after running several thousand kilometers with only the Circuit.
Therefore, this Plug can be confidently promoted not only to circuits but also to riders who love touring!
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Anyway, it's bright.
Used for GYRO CANOPY (TA03).
CANOPY is bright anyway, partly because it is a two-light system.
Light distribution is not bad.
Now we are hoping for durability.
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
This location is easy to use.
I think it is easy to use as a place to hang the helmet you took off.
Installation is easy
View detail
Fits: HONDA CUB [Cub]., HONDA CUB [Cub]., HONDA CUB90 [Cub]., HONDA GROM [grom]., SUZUKI ADDRESSV100 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI BIRDIE [Birdie]., SUZUKI Birdie 50, SUZUKI Birdie 50, YAMAHA GEAR [gear]., YAMAHA Town MATE90 [Mate]., YAMAHA News MATE [Mate]., YAMAHA News MATE80 [Mate]., YAMAHA News MATE90 [Mate]., SUZUKI DF125, HONDA APE100 [Ape].
Hunter grips as original
Hunter grips are like the original and even better and better than the original grips. The rubber itself is thicker, denser, and the price is very budget. I recommend to everyone, I will still take. -------------------------------------------------- -------- Hunter flips as an original and even better and better than the original grips. The rubber itself is thicker, denser, and the price is very budget. I recommend it to everyone, I will still take it. Powered by Google Translator View detail
Fits: HONDA Ape (50)(APE), HONDA PCX, HONDA BENLY50, HONDA PCX, HONDA PCX, HONDA PCX, HONDA NS-1, HONDA NS-1, HONDA NS-1, HONDA NS-1, HONDA nighthawk 250 (Night Hawk), HONDA NS-1, HONDA NS-1, HONDA MAGNA 50 (MAGNA), HONDA MAGNA 50 (MAGNA), HONDA MAGNA 50 (MAGNA), HONDA LEAD50 (LEAD), HONDA LEAD50 (LEAD), HONDA LEAD100 (LEAD), HONDA LEAD125 (LEAD)
Required for Front forkOverhaul
Product Name
NTB Front Fork Oil Seal Set
Item Number
FOH-01S
Vehicles
Grom ( JC61 ) 2015
Number of man-hours
About 2 hours
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers
Why did you choose this product?
I chose this product because I wanted to overhaul the front fork of my Grom. I tried to overhaul it about two months ago, but I failed and damaged the oil seal, which caused a light oil leak.
Was the one you received as per Image?
It was just as shown in the Image. No problems.
Was the installation difficult?
I had already installed it once, so it was quicker than the first time, although I had a hard time fitting the oil seal. I used a vinyl chloride pipe as a substitute.
How was your experience with it?
The installation was done successfully and without any oil leaks.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CB250R, HONDA MONKEY125, HONDA CBR250RR, HONDA CB300R
Simple
Simple and unobtrusive, it is suitable for large people.
I wish there were more colors available.
The texture is so-so.
View detail
Fits: KAWASAKI KSR-I, KAWASAKI KSR-II, KAWASAKI KS-II, KAWASAKI KSR-110, KAWASAKI Z125PRO, SUZUKI LETS II-S, SUZUKI SEPIA ZZ, SUZUKI SEPIA RS, SUZUKI ShotS, SUZUKI Address Tune, SUZUKI AddressVTune, SUZUKI ADDRESS V50, SUZUKI Address50, SUZUKI ZZ, SUZUKI HI-UPR, SUZUKI GAG, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS110, SUZUKI ADDRESS110
It is said that the size is just right for a grom. If you don`t put a top case on it
I bought the M Size after reading the impressions that it was just right for the Grom, but I had forgotten about the Top case.
It is not impossible to use it, but I regret that I should have chosen a Large size.
I think the quality is good
View detail
Fits: HONDA CB1100, HONDA CB1000 SF (Big One), HONDA CB-1, HONDA CB-1, HONDA HORNET600, HONDA HORNET250, HONDA ZOOMERX, HONDA JADE, HONDA glom, HONDA glom, HONDA X4, HONDA X4, HONDA X11, HONDA VTR250, HONDA VTR1000FVTR1000F FIRESTORM, HONDA VTR TypeLD, HONDA VFR800, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
For Z125 Pro
I took the opportunity of replacing the Z125 Pro Handlebar and incidentally replaced the Stem Nut.
For the price, I think it has a dress-up effect, and the appearance is Refreshing.
I think it matches with DAYTONA and Front fork cap.
When tightening the Nut, it is best to take care not to damage the Nut itself.
Also, if the tightening Torque is met, there is no concern that it will loosen.
It has been about 1 year and 2 months since installation and I am satisfied with no problems.
View detail
Fits: Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA PCX125, HONDA PCX125 E:HEV, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CROSSCUB110, HONDA glom, HONDA MONKEY125, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
Full face is fine.
Installation was easy and I am happy to lock it with no problem even with the full face Helmet. View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
30W floating.
I have been using it for about a week.
Light is M&H Maz StripeB2 on DMR-JAPAN Multi-reflector used for about 2 years. [Color] Clear (35/36.5w) This is a change from
Direct AC compatible, so it is also compatible with KSR with half-wave rectification.
It blinks in Idling, but lights up normally when the rotation is up.
As for the depth in the Light, there seems to be room for about 5mm.
So far no discoloration deformation etc. of the Lens section, no thermal problems.
I feel it is brighter, but my impression is that it is too White for me and not easy to see.
I would replace it immediately if a VERSION with a lower color temperature is available. (4000-5000K)
Halogen → I floated about 30W with LEDs, so I will be able to increase my warming equipment for winter.
View detail
Fits: HONDA GB350, HONDA FORZA-SI, HONDA PCX160, HONDA ZOOMERX, HONDA GB350S, HONDA PCX125, HONDA MONKEY125, HONDA PCX125 Hybrid, HONDA glom, HONDA PCX125 E:HEV, HONDA PCX150, HONDA DAX125, HONDA Universal(for Φ22.2 Handle), HONDA CT125CT110 HUNTER CUB, HONDA CL250
Attach your phone to the HandlebarCenter
Purchased to attach a Smartphone Folder to the HandlebarCenter of a GB350S.
It was easy to install as it was only an OEM Product and replacement.
Handlebar operability remains unchanged.
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
Installed on SEROW225
In the case of SEROW, it is necessary to change the original upper screw to a bolt with hexagon hole (cap bolt), but this is all that is required to install it. View detail
Fits: HONDA PCX, SUZUKI Zixer 250, SUZUKI Zixer 150, SUZUKI SWISH, SUZUKI GSX-S125, SUZUKI GSX-S125, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX, YAMAHA MT-25, YAMAHA MT-03, HONDA Rebel 250, HONDA Rebel 250, HONDA Rebel l 1100DCT, HONDA Rebel 1100, HONDA Monkey 125, HONDA hunter turnip, HONDA Super Cub 110 Pro, HONDA Super Cub 110 Pro, HONDA Super Cub 110
The construction is solid.
I used Knuckle guard of KITACO and Mukawa in the past, but this Knuckle guard has thickness of Acrylic and Bracket.
They were all thick and Well.
After installation, there was no distortion or shaking when driving.
I used it with DAYTONA's WindowShield, but the screw holes in the bracket were a little small and the bolt did not fit through, so I had to drill to slightly increase the size of the bolt.
Drill when used with the same DAYTONAWindowShield.
View detail
Fits: HONDA PCX, SUZUKI Zixer 250, SUZUKI Zixer 150, SUZUKI SWISH, SUZUKI GSX-S125, SUZUKI GSX-S125, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX, YAMAHA MT-25, YAMAHA MT-03, HONDA Rebel 250, HONDA Rebel 250, HONDA Rebel l 1100DCT, HONDA Rebel 1100, HONDA Monkey 125, HONDA hunter turnip, HONDA Super Cub 110 Pro, HONDA Super Cub 110 Pro, HONDA Super Cub 110
In some cases, there may be processing?
I put it on my CROSS CUB110.
Since I had a Screen and Front basket attached, I thought there might be some interference, but I was able to install it without any interference.
However, the bracket screw holes were too small for the DAYTONA window screen, so I used a drill to increase the size of the holes to make them larger.
Acrylic and Bracket were thick and firm, though, [Color] Black Painting was better in my opinion than Bracket of Plating Process on Acrylic of Smoke.
Guard." Although it has the name of "wind protection", it does not have the protection of a hand guard or knuckle guard like those attached to off-road vehicles, and should be considered as wind protection items.
However, when driving on a moped within the legal speed limit on ordinary roads, I could not see any wind protection effect, but it looks better, so I give it a ◎.
View detail