Reviews
Fits: HONDA MONKEY125, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110 PRO, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA glom, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA glom, HONDA CROSS CUB 50, HONDA CROSSCUB110, HONDA WAVE125R, HONDA CZ-i110, HONDA WAVE125S, HONDA WAVE125i, HONDA ANF125innova
Replacement from Windshield IRIDIUM
Windshield IRIDIUM had enough combustion and I was satisfied with it, but after reading other reviews, I decided to replace the Windshield IRIDIUM with this one because it was 10,000 km and I felt like I should replace it. It is very good! I feel like Torque is increased. The cost-effectiveness is outstanding. View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA CB50, HONDA CB50, HONDA CB90, HONDA CBX125, HONDA CBX125
For MTX200RII
The rear brake of MTX200RII was extremely ineffective, so I checked it and found that it was the same shoe as the CUB, so I replaced it immediately. View detail
Fits: HONDA Little Cub, HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB)
Shifting Shock Reduction
The Super Cub custom with square eye and the Standard with round eye both had a large shock when shifting, so we replaced them both. The original damper was hardened and the square eye one was particularly thick.
After the replacement, ShiftShock is noticeably lighter and runs more comfortably.
View detail
Fits: HONDA MONKEY125, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110 PRO, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA glom, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA glom, HONDA CROSS CUB 50, HONDA CROSSCUB110, HONDA WAVE125R, HONDA CZ-i110, HONDA WAVE125S, HONDA WAVE125i, HONDA ANF125innova
It is about 3 times the price of the Standard Plug BP5HA, but considering that it is a Windshield IRIDIUM and will last twice as long...
After 13,000Km, the long distance fuel consumption dropped from over 70Km/L to 65Km/L, so I replaced BigThrottle + Fuel Booster cable and Air Element, I don't know about the effect of Single Item, but Torque up and the feeling of occasional misfiring at Idling are gone.
Considering that the price is about three times the standard price and the durability is twice as high because of Windshield IRIDIUM, I think there are no complaints, including the effectiveness.
The standard was 13,000Km, so I'm thinking of replacing it next time around every 20,000Km or so.
View detail
Fits: HONDA CD50, HONDA BENLY CL50 (BENLY50), HONDA Broad (BROAD), HONDA CBX125F, HONDA CBX125F, HONDA CBX125C, HONDA CBX125C, HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA CBX125C, HONDA CBX125C, HONDA Broad 90 (BROAD), HONDA CABINA (CABINA), HONDA CABINA 90 (CABINA), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA TACT Basic SPECIAL Knife, HONDA TACT Basic
Replace the old one
I think it is good for city driving, it is enough for slow driving, just my personal opinion. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA ADV150, HONDA LEAD 125, HONDA LEAD 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA SUPER CUB C125, HONDA SUPER CUB C125, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA SH MODE
Good!
[How is it used?
No leakage of waste gas
How was your experience with it?
No problems
How did it compare to other products?
Good cosmetics in a pack of 2
[Points to note]
None
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
COSPA ◎
[How is it used?
The OEM GEAR ratio of the CUB is quite short, so I bought it to change the GEAR ratio. 1 speed of the CUB is so short that I wondered where I would use it, so I chose the largest size that would fit in the Engine.
Was the one you received as per Image?
As per Image
I always use KITACO's Sprocket for 4MINI systems because of its good cost performance.
Was the installation difficult?
Since there are 16 chains, the Wide Chain Guide Plate (https://www.webike.net/sd/23863487/) must be installed at the same time.
How was your experience with it?
It is now much easier to drive. Also, since the RPMs were lowered when cruising, fuel consumption was also increased. Two birds with one stone.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Wide Chain Guide Plate (https://www.webike.net/sd/23863487/) is required to protect Crankcase and should be purchased at the same time.
View detail
Fits: HONDA CROSSCUB110, HONDA SUPER CUB110-PRO, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50-PRO, HONDA SUPER CUB 50
Protection.
[How is it used?
Drive Sprocket (Front) (https://www.webike.net/sd/370566/), as it seems to be mandatory to purchase them at the same time in order to install 16 of them.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Simply remove the original attached OEM and replace it.
How was your experience with it?
There is a sense that Crankcase is protected. I don't feel it particularly.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Not particularly
View detail
Fits: HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110PRO
JA59. Quite an impression change.
[How is it used?
CUB Dress-up
Was the one you received as per Image?
Image Street
Was the installation difficult?
One Phillips Screwdriver is all you need
How was your experience with it?
The CUB has been tightened up, looking better while retaining the Retro feel of the CUB.
[Included Parts:were they on?
Lens and Valve only. Instruction Manual was a type that reads QR.
[Was there anything that disappointed you?
nothing special
Lens. [Color] If you want to use Smoke, Valve's Amber with Color is about 1,400 yen cheaper than Plating, and the orange color that is faintly visible is cool. Installation takes about 10 minutes. For both the rear and front blinkers, remove the bottom screw and turn the coupler to the Left to remove the Lens, and the ball can also be removed by lightly pushing it in and turning it to the Left. Installation is the reverse procedure.
The Smoked lens on the Tail is from KITACO (about 2600 yen on amazon).
View detail
Fits: HONDA little cub, HONDA monkey, HONDA Forza Z ABS, HONDA Forza Z ABS, HONDA dunk, HONDA Super Cub 50, HONDA gyro canopy, HONDA X-ADV, HONDA VTR-F, HONDA VTR250, HONDA VFR800F, HONDA PCX150, HONDA PCX125, HONDA NM4-02, HONDA NM4-01, HONDA NC750X, HONDA NC750S, HONDA CTX700N, HONDA CTX700, HONDA CTX1300
For peace of mind
I installed it on a Spur CUB110. Instruction Manual was included after installation, but
There is no Instruction Manual on how to wire. I had a little trouble, but I was able to install it.
I think you should take it easy and let Shop handle it.
Attachment is required for installation.
It is easy to use, just turn off the key and it will beep one minute later! A minute later, it will beep!
With the key ON
Release. I think it's safe to leave Motorcycle for a bit.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110ThailandMODEL, HONDA SUPER CUBC125, HONDA CT125, HONDA GROM, HONDA MSX GROM, SUZUKI Gixxer, HONDA DAX125
Very easy.
Installed on a grom jc92.
Chain adjustment has become very easy. It is also an Accent for the suspension.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
Grom jc92
I have increased one finger to 16T. I have not ridden a long distance yet, but on a flat road, I can ride as well as I did with the 15T. I don't feel any lack of Torque at the start.
I have not yet put on the Pulse speed converter, but the Meter reading has a very Large error.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cub Pro110, HONDA Cub Pro50
Just right with moderate quality.
Carrier originally had Bamboo Kawa Plating for CUB, so I put it on, but I thought Black would look good on JA45 Green Light, so I bought it. It was not so luxurious, but matched with the cool feeling of CROSS, which was what I was aiming for. The price is about half of the manufacturer's product, and I can now put thin luggage in it. The only thing I regret a little is that the body is painted black, but the included screws are silver. I read this imprement before I bought it, and it said that the CUB needed to be modified, but the CROSS was large and sturdy. View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA XR100MOTARD
cheap
It's cheap
The JC92 is a 5-speed Mission, but honestly I have no use for 1st gear,
So I decided to use the first gear by setting the Front to 17.
The replacement itself is easy, but please note that the Cover will not be attached unless the bracket of the Sprocket Cover is modified or replaced with another brand product.
It may be the first thing you change when you buy a new car.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Bright!
I bought a used VINODELUXE Valve because it was out of stock, so I looked for it and found it.
It is not made in China, which I have never heard of, and which I sometimes see on Amazon and other places. The brightness is nothing compared to the Normal valve. It is bright! It is enough for the speed range of a moped.
It may be a problem on the vehicle side, but switching from Low to High is smooth, but conversely, when changing from High to Low, I feel that it changes with a slight one-tempo13 delay.
View detail
Fits: HONDA CT110 HUNTER CUB125, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA PCX 125, HONDA PCX 160, SUZUKI ADDRESS110, SUZUKI Address125, YAMAHA AxisZ, YAMAHA CYGNUS X, YAMAHA CYGNUS Gryphus, YAMAHA NMAX125, YAMAHA NMAX155
CT125 would still be better with a dedicated Size
Purchased ahead of time with the intention of equipping Tandem seat + Box
I have the dedicated Size one, but it's still as easy to hang, the ears can be dried on the hook, and the feel of the inside is just as good as ever.
The special size was Exactly for the tire and ground surface, but this size makes it feel a little buggy.
On the other hand, there is plenty of room in a Large tight box, so it's no wonder they make it in mediocre.
The performance seems to be good. No stain even in heavy rain, no rust in the exhaust system, and I am satisfied.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100 TypeD
I raised it from 12T to 13T and 13T to 14T.
I went from 12T to 13Th to lower the Engine RPM when driving. I went from 13T to 14T to lower the RPM a little more. Now I can cruise 60km before the engine roars even on a moped. Of course, it is only a moped when going uphill.
When I bought it, I noticed that the Washer shape is different between Takegawa and Tokico (the position of the Bolt hole and the notch to enter the Spline are reversed), so it cannot be fastened without using the Washer included in the package.
View detail
Fits: YAMAHA Vino, YAMAHA Vino, YAMAHA JOG, YAMAHA JOG, SUZUKI XCH50, HONDA XR125LK, HONDA XR125LEK, HONDA XR125L, HONDA XR125, HONDA XL125, HONDA XL125, HONDA Today, HONDA Today, HONDA Today F, HONDA Tact, HONDA Tact, HONDA Tact Basic, HONDA Tact Basic, HONDA Super Cub50 Pro, HONDA Super Cub50 Pro
usually
I don't know about durability yet, but from the initial feeling, I think it is usually good.
Perhaps asking for more would not make much difference.
View detail
Fits: HONDA CB50JX-1, HONDA CRF100F, HONDA CRM50, HONDA CRM80, HONDA CY50, HONDA GROM, HONDA JAZZ, HONDA MB50, HONDA MBX50, HONDA MSX125, HONDA NS-1, HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA Solo, HONDA XE50, HONDA XE75, HONDA CROSS CUB, HONDA CROSS CUB50, HONDA CHALY 50
I guess I could have raised it another T.
I bought it to raise the front sprocket by 1T because my old moped had power and would dip down. I was able to install it without any problems. After driving it, I thought it would be a good idea to raise the front sprocket by another 1T. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50-PRO, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA DAX125, HONDA MONKEY125, HONDA glom, HONDA SUPER CUBC125, HONDA CB125R, HONDA CB250R, HONDA REBEL250, HONDA CT125CT110 HUNTER CUB, HONDA CROSS CUB50
It's like it's more flashy.
Installation is easy
Just need Torx wrench.
View detail