Reviews
A little short, a little thick
I installed it on a ZrX1200ZrX1200 DAEG and it was a little short in overall length.
I think 125mm is just right. i bought some Sponge from Home center and filled the gap.
The thickness is about 33mm compared to about 30mm for OEM. It is just right for me. It may be too thick for some people.
View detail
I am satisfied
It was just as problem free as the previous product I purchased. View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
Fits: YAMAHA SR250, SUZUKI 250SB, HONDA 250T LACustom, HONDA AX-1, HONDA CL135, HONDA CL350, HONDA CL72, HONDA CL77, HONDA CM250T, HONDA CM400T, HONDA CRM250AR, HONDA CRM250R, HONDA FTR223D, HONDA FTR250, HONDA GB250 CLUBMAN, HONDA GB400TT, HONDA GB500TT, HONDA MT250ELSINORE, HONDA MTX125R, HONDA MTX200R
Does not fit the KL250 Sherpa.
The Manufacturer's list of compatible models says it is compatible with KL250 Sherpa, but that's too long.
If installed normally, there will be excess
The quality of the product itself is not bad, so I think it will be fine for cars with longer forks.
KL250 Sherpa's Fork outerTop to bottom of trident is 240mm
Catalogue value WheelTravel is 230mm
100mm remains above the Outer even when shrunk the most without processing.
This would make Stroke about 130mm.
If it was just for Inner Tube protection purposes, it would be fine, but I don't think it is, so I cut it off, even though it will look very ugly lol.
In hindsight, I lightly regret that using the top half wouldn't have made it so ugly.
However, even in this state, the Stroke will be reduced by about 50mm
Boots itself becomes Bump rubber.
Even other companies' products that say they are compatible with KL250 Sherpa are quite long.
Would it be better to just use a shorter product with more extension?
Maybe I'm losing my mind, but I'd like to find a good product!
I bought it + even processed it so I'll be using it for a while lol.
View detail
For CB250F
.Actually this item i could not found in my country (VX Series Joint Link 520VX3). Finally I bought it from webike. It is original. Very good packaging.fast shipping.I am happy to deal with the webike team View detail
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
Ideal for the time being
I am pleased with the actual color against the color humidity, which is exactly what I expected. The luminous intensity is not as good as LEDs, but nighttime driving in the city with streetlights is not a problem. When entering Tunnel during the daytime, it is difficult to see where your car is illuminated. I think it is a good choice for inexpensive and temporary use. View detail
Mobility Outclassing!
Used for Initial Model TW.
So far, it's been a regular Plug.
Replaced with this product and startup changed.
I did
The stability during Idling was also increased.
I think
TW is a single cylinder, so it's a good cosmetic choice.
I think
View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400, YAMAHA XJ750, YAMAHA XJ750, YAMAHA XJ600, YAMAHA XJ600
Vehicle Inspection Measures
NORMAL H4 will pass vehicle inspections, but for further peace of mind, 60W is labeled as equivalent to 100W.
Highly efficient Type was selected.
I measured the illuminance with a smartphone app and saw that it was up about 20%.
However, the H4 was used for years before replacement, and even if it is NORMAL, replacing it with a new one will pay for itself.
I also think it will increase illumination.
Because of its high efficiency, we are concerned about its durability and would like to evaluate it in the future.
View detail
Fits: HONDA CB500F, bimota db-1SR, bimota db-1S, bimota db-1, bimota BB1 BIPOST, bimota BB1 SUPER MONO, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250/ABS, YAMAHA BRONCOST225, YAMAHA SEROW225 WE, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA YZF1000 THUNDER ACE, YAMAHA YZF1000R, YAMAHA YFM400FWA, YAMAHA YFM350X, YAMAHA YFM350X
error of conformity check
I didn't check the part number I have on it now and placed an order based on the results I got by searching for GN125, and it was non-compliant.
We must not neglect the basics of properly checking what is currently attached. What shall I do with this Plug?
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Joint link in Chain
I bought RossiMODEL's Chain, but only LINK was fluorescent yellow color, so I bought Silver color as same as other LINK.
I haven't put it on yet, but I think it will be a calming color scheme.
View detail
Fits: その他 , HONDA XL250, HONDA XL230, HONDA XL200, HONDA TLM220, HONDA TLM200, HONDA SL230, HONDA MTX250, HONDA Elsinore 250, HONDA FTR250, HONDA CTX200, HONDA CRM250 AR, HONDA CRM250 R, HONDA CRF250L, HONDA CL72, HONDA CL175., HONDA AX-1, YAMAHA DT200 WR, YAMAHA DT200 R, YAMAHA DT-1
Stylish & practical!
[How is it used?
Used on Yamaha's WR155R.
The handlebar to be installed is ZETA's CX Handlebar MX-412.
Was the one you received as per Image?
The product was exactly as shown in the picture.
Was the installation difficult?
Same as normal Grip exchange.
How was your experience with it?
I was looking for a replacement for my OEM Grip that was losing weight and chose one that looked good and functional.
The OffRod Grip is a great bite and the stylish DominoLogo is satisfying.
Wiring ditches are also provided and considered.
If you are going to replace it, I recommend this Grip because the price is not that different from others!
It is nice to be able to choose between Open End and Closed End.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
I've always loved it.
It is thick and easy to grip, and I have been using it for a long time. View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Firm and direct feel
I bought these to replace softer "comfort" grips the previous owner installed. Immediately, I noticed an improvement in fine throttle control, and feel more certain of my hand positioning. The material feels firm and provides high grip. I imagine it would perform well in wet weather, too. I would recommend these grips to those who prefer a "direct" feel. View detail
Fits: HONDA CB500F, bimota db-1SR, bimota db-1S, bimota db-1, bimota BB1 BIPOST, bimota BB1 SUPER MONO, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250/ABS, YAMAHA BRONCOST225, YAMAHA SEROW225 WE, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA YZF1000 THUNDER ACE, YAMAHA YZF1000R, YAMAHA YFM400FWA, YAMAHA YFM350X, YAMAHA YFM350X
Iridium plugs
It is a good product with good spark flight. View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Repeat use. I don't remember how many times I have already replaced it.
I don't like the sticky feel of custom grips on the market.
I have been using it for years.
I was surprised that it had enough gripping power without being sticky.
In fact, it is not sticky to the touch with bare hands, and there is no sense of uneasiness due to its softness.
For wire lock (?) The grooves are cut to allow for use in Race.
[How is it used?
Touring ~ Circuit
Was the one you received as per Image?
YES
Was the installation difficult?
Easy (Installed on external high throttle)
How was your experience with it?
Satisfied
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
[Opinions and requests to Manufacturer
The price is low but the quality is high and there is nothing to say about it.
However, currently there is only a 120mm lineup, so I am eagerly awaiting a 115mm version.
View detail
Fits: SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, HONDA FORZA Z, HONDA FUSION, YAMAHA RZ250, YAMAHA RZ350, YAMAHA TZR250, YAMAHA XJ400, YAMAHA XJ400, YAMAHA XJ400, YAMAHA XJ600, YAMAHA XJ600, YAMAHA XJ600, YAMAHA XJ750, YAMAHA XJ750, YAMAHA XZ400, YAMAHA XZ550, YAMAHA YZF-R1, YAMAHA YZF-R6
It's bright
It shines very brightly and far, but does not illuminate the bottom very well.
Should I adjust the angle a little?
CYGNUS has a light at the bottom of the body, so I thought I had to up the memory by about 2Memory, but it turned out to be a bad idea.
The previous Today I was on had a Light on top of the body, and even then it wasn't very well lit underneath, so I'm not sure if that's the way it's supposed to be.
It is bright even on low, so if you don't pay attention to the distance between cars, you will naturally become an agitated driver lol.
During installation, the needle gold that holds the valve in place came off, and I couldn't figure out how to install it, so I spent about 30 minutes doing the "pusher-pusher" thing.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Rivet Joint
Is the price going up?
Everything is going up in price.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, HONDA XELVIS, HONDA JADE, HONDA CT250S SILKROAD(CT250S), HONDA XR250, HONDA XR200, HONDA XLX250, HONDA XL600, HONDA XL500, HONDA XL500, HONDA VTZ250, HONDA VTZ250, HONDA VTR250, HONDA VTR-F, HONDA NSR250R, HONDA MVX250F, HONDA CBR250F, HONDA HORNET250, HONDA XR600
pleasant color
I wanted to replace my WR250X with a three-point replacement and this is the one I chose.
The reasons for selecting this product were the lightweight aluminum, the fact that we were able to obtain the same front as the manufacturer's at a special sale, and the fact that it is gold in color.
It is much lighter than the removed OEM, but you can't tell the difference when running with it installed.
I have driven about 8,000 km with it installed and have had no problems.
I think the durability is still good, and 20,000 km is good enough.
View detail