Reviews
Fits: HONDA CR125, SUZUKI Sky Wave 250, YAMAHA Majesty 250 (SG03J), YAMAHA Majesty 125, YAMAHA tricker, YAMAHA SRV250, HONDA XR250, KAWASAKI KSR-2, SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, HONDA foresight, KAWASAKI Z250LTD, KAWASAKI Z250FT, HONDA CB400 SUPER FOUR, HONDA ZOOMER(Ruckus), HONDA XL230, HONDA TLR200, HONDA TLM220R, HONDA SL230
MAD Max Handlebar Grip Wave Type
Grip feel is solid. No problems with installation. View detail
Fits: HONDA XR440R, HONDA XR440R, HONDA XR400SM Motard, HONDA XR400RT Acier, GASGAS MC250, GASGAS MC125, GASGAS FSE450, GASGAS EC515, GASGAS EC450, GASGAS EC300, GASGAS EC300, GASGAS EC300, GASGAS EC250, GASGAS EC200, GASGAS EC125, GASGAS EC125, GASGAS 450 Fse, BETA SM450, BETA SM400, BETA RS450
Does it feel like the back of the OEMPad works twice as well?
[How is it used?
I have used the vehicle for 3 years and 10,000 km since purchase, and thought that the pad installed at the time of purchase must be worn out by now, so I replaced it.
It was rumored to work well in certain places, so I decided to go with this Pad, although it is a bit expensive! 。
How was your experience with it?
The initial Touch is what? The initial Touch is so gradual that you may think, "What is that? It is not suitable for those who are looking for an effect that starts up quickly in the early stage.
However, as you tighten your grip on it, it starts to work.
I used to Brake with two fingers on my previous Pad, but now I can do my normal deceleration with a slightly stronger grip, even with just one index finger.
However, it requires Stroke to work (because it is OEMHose?). So, it takes more grip strength than expected.
How did it compare to other products?
The pad installed at the time of purchase was presumably HYPERSintered by DAYTONA.
The braking force was satisfactory enough, but the effectiveness has been further improved compared to that.
Durability will be verified in the future.
[Points to note]
When replacing the pad, it is better to clean the caliper and grease up the slide pins.
The wear and tear of the Rotor must also be checked.
View detail
Fits: YAMAHA tricker, YAMAHA SRV250, HONDA XR250, HONDA CR125, SUZUKI Sky Wave 250, YAMAHA Majesty 250 (SG03J), YAMAHA Majesty 125, YAMAHA ZEAL, HONDA foresight, KAWASAKI Z250FT, KAWASAKI Z250LTD, KAWASAKI KSR-2, SUZUKI DR250S, SUZUKI DF200, HONDA CB400 SUPER FOUR, HONDA ZOOMER(Ruckus), YAMAHA Virago 250 (XV250), YAMAHA Dragster 250, YAMAHA Cerro 250, YAMAHA Cerro 225W
Texture as expected
I was looking for the texture of Raw Rubber, and that's exactly what I got.
Now if only it were more durable, I would have no complaints.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Versys 1000, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-12R, KAWASAKI ZX-10R, KAWASAKI ZRX1200 Daeg, KAWASAKI Z1000 (water-cooled), KAWASAKI 1400GTR, HONDA Hornet 900, HONDA XRV750 Africa Twin, HONDA XRV750 Africa Twin, HONDA XR650, HONDA XR650, HONDA XR600, HONDA XR400 Motard, HONDA XR400R, HONDA XR250 Motard, HONDA XR250 Baja
mmm
I think the bolt itself is fine. However, the shape of the bolt is different from that of the OEM rotor bolt, so if the bolt is installed as is, the brake rotor will not be centered. I finally matched the bolt with a Dial gauge. Also, the length is too short, but I think it is no problem since I screw-locked it. The weight reduction is a little. It does not feel lighter than I expected. It looks very beautiful. If you are replacing the Bolt, please do not lick the Bolt as it has an OEM screw lock. It is easy to remove. I also used a Tap to clean the screw hole. View detail
Fits: HONDA XR250, HONDA CR125, SUZUKI Sky Wave 250, YAMAHA Majesty 250 (SG03J), YAMAHA Majesty 125, YAMAHA tricker, YAMAHA SRV250, HONDA foresight, KAWASAKI Z250LTD, KAWASAKI Z250FT, KAWASAKI KSR-2, SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, HONDA CB400 SUPER FOUR, HONDA ZOOMER(Ruckus), YAMAHA BJ, YAMAHA DT125R, YAMAHA BWS (Bewith), HONDA monkey
Comparison with Zero Grip
The grips I replaced before were getting worn out, so I replaced them. The design is almost the same. The design is almost the same, but the price is one third of the Gold price.
I tried cheating.
I really wanted Pierced Type because I wanted to put a Bar End on it, but I made an order mistake and bought Closed End, so I cut the end with a Cutter Knife. Check the Spec. before ordering.
Here's a little comparison with the 0ro Grip.
The Mad Max Grip is noticeably stiffer; it doesn't feel rubbery and has a plasticky grip. Since it is stiffer, it seems to be more durable in terms of wear and tear.
I feel that it is hard and cannot be expected to absorb vibrations or anything like that.
Even considering those negatives, the price is attractive.
But honestly speaking, if price can be ignored, I would definitely give the edge to the 0ro Grip. If you consider price as a factor of performance, it is quite superior.
It is not recommended for long-distance touring or large motorbikes with vibration, but for short-distance use or for those who want to customize at low cost.
View detail
Fits: HONDA CRF250R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, HONDA CR125R, HONDA CR250R, HONDA CRF150F, HONDA CRF230F, HONDA CRF250F, HONDA CRF250X, HONDA CRF450L, HONDA CRF450X, HONDA CRM250AR, HONDA SL230, HONDA XR230, HONDA XR250, HONDA XR250BAJA, HONDA XR250MOTARD, HONDA XR250R, HONDA XR400R
DRC Sprocket
Outstanding durability.
I have been using it every time for more than 10 years now.
It's heavy, but it's my Level, and it's driving.
It does not feel heavy.
View detail
Fits: HONDA CB750, HONDA CBX250, HONDA NS250, HONDA NS400, HONDA VF400, HONDA Forza(MF10), HONDA fusion, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, SUZUKI DF200, SUZUKI GSX400, SUZUKI RF400, SUZUKI RG400, YAMAHA XZ400, YAMAHA vino, SUZUKI SV1000S, SUZUKI SV1000, KAWASAKI ZZR1200, KAWASAKI ZX-12R, KAWASAKI 1400GTR
I want to cancel an order, but I don't know how.
I want to cancel an order, but I don't know how.
I don't know where to inquire, so I am writing here, even though it is out of place.
I want to Cancel the order before it is shipped, but I am having trouble doing so.
View detail
Fits: HONDA CRF250R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, HONDA CR125R, HONDA CR250R, HONDA CRF150F, HONDA CRF230F, HONDA CRF250F, HONDA CRF250X, HONDA CRF450L, HONDA CRF450X, HONDA CRM250AR, HONDA SL230, HONDA XR230, HONDA XR250, HONDA XR250BAJA, HONDA XR250MOTARD, HONDA XR250R, HONDA XR400R
ANHELO also makes low speeds so much easier.
[How is it used?
Used to make CGCHardEnduroSpec.
Was the one you received as per Image?
I bought it because I wanted to increase the reduction ratio to 4.0 or higher, and it was as per Image.
Was the installation difficult?
The tension of the Chain was changed so that the Swing arm and Tire hit each other and we had no choice but to move the Offset of the Wheel by 5mm.
How was your experience with it?
I wish I had changed it sooner.
Even on a severe hill, you can climb it if the road surface is good just by using the half-Clutch on the verge of stalling!
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
I was worried about the scraping when running Muddy because it is a Steel Sprocket, but there were no problems.
Is it well baked?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI GPZ1100, KAWASAKI ER-6n, KAWASAKI EX-4, KAWASAKI GPZ1000RX NINJA, KAWASAKI GPZ400, KAWASAKI GPZ750, KAWASAKI GPZ900R NINJA, KAWASAKI NINJA400R , KAWASAKI NINJA650 R, KAWASAKI W400, KAWASAKI W800, KAWASAKI Z1-R, KAWASAKI Z1, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 KZ, KAWASAKI Z1000 Air cooling, KAWASAKI Z2, KAWASAKI Z400, KAWASAKI Z750, KAWASAKI ZEPHYR1100
Happy!
The SR OEMGrip makes my hands sore and the throttle slippery after long rides.
I thought it might be vibration, but I also wondered if the Large size of my hand and the thickness of the Grip did not match and decided to replace it.
I was concerned about the NORMAL look, so I decided on this product with Closed End. As a result, I am satisfied with the Large size. I also added vibration suppression, so long-distance touring is now more enjoyable!
However, there was a little BALI, so one star is Minus.
View detail
Fits: HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA CB300R, HONDA CB300R, HONDA CB300R, HONDA CB500F, HONDA CB500F, HONDA CB500F, HONDA CB500F, HONDA CB500F
exchange
Overhaul of the RearBrake master cylinder.
It was helpful that the same item was available at HondaOEM Parts.
View detail
Fits: HONDA C125, HONDA C125, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100N, HONDA CB1100N, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR
exchange
The parts that were outdated at the time of the overhaul of the front brake caliper are replaced.
Since it is a Rubber, it was deteriorated badly, so I replaced it with HondaOEM Product, which is the same as the installed product, but I thought the price was a little high.
View detail
Fits: KAWASAKI GPZ1100, KAWASAKI ER-6n, KAWASAKI EX-4, KAWASAKI GPZ1000RX NINJA, KAWASAKI GPZ400, KAWASAKI GPZ750, KAWASAKI GPZ900R NINJA, KAWASAKI NINJA400R , KAWASAKI NINJA650 R, KAWASAKI W400, KAWASAKI W800, KAWASAKI Z1-R, KAWASAKI Z1, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 KZ, KAWASAKI Z1000 Air cooling, KAWASAKI Z2, KAWASAKI Z400, KAWASAKI Z750, KAWASAKI ZEPHYR1100
good
The delivery is fast The product is good, too I'll introduce it to people around me Please take good care of me next time, too View detail
Fits: HONDA CB1100, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR
Replace with new one
Rear brake maintenance, disassembly for cleaning and reassembly, and replacement of the O-ring with a new one or else it may leak, so it is purchased and replaced.
It is helpful that the same products can be purchased at HondaOEM.
View detail
Fits: HONDA C125, HONDA C125, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D
Replace with new one
I purchase this caliper to replace it with a new one when I reassemble it, since I disassemble it for maintenance and overhaul of the rear caliper.
Material:Since it is a Rubber product, the installed parts were badly deteriorated and I was able to purchase the same parts at OEM Product and replace them with new ones.
View detail
Fits: HONDA C125, HONDA C125, HONDA CB1100, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R
New installation
I purchased this caliper because I wanted to replace it with a new one when I disassemble and reassemble it for maintenance and cleaning of the rear caliper.
Material:Since it is a Rubber product, the installed product was old and deteriorated badly, so we were able to replace it with a new one.
View detail
Fits: HONDA XR650, HONDA XR600, HONDA XR250, HONDA XR400R
It would be even better if the Title could immediately tell whether it is Front or Rear!
It's so light! Looks and feels Parenthesis better! View detail
Fits: HONDA CB1100F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CBR1000RR
exchange
Rear brake maintenance and replacement with a new one since the installed item was old, discolored, and rusted at the time of overhaul.
I was able to replace it with a new one, which is available at HondaOEM Parts and is not expensive.
View detail
Fits: HONDA CB1100, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000, HONDA CRF1000
Replace with new one
Maintenance of the RearBrake Caliper and replacement with a new one since the installed parts were out of date at the time of overhaul.
Since rubber systems inevitably deteriorate over time, it is helpful that new OEM products are available and can be purchased and replaced with new ones.
View detail
Fits: HONDA CRF250R, HONDA CRF250R, HONDA CRF450L, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F
exchange
I was able to purchase a new OEM product, so that was a big help. View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1100F
exchange
BrakeMaintenance, along with Cup replacement, was discolored and old, so it was replaced.
It is helpful because it is sold new by HondaOEM Product.
View detail