Reviews
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
COSPA ◎
[How is it used?
The OEM GEAR ratio of the CUB is quite short, so I bought it to change the GEAR ratio. 1 speed of the CUB is so short that I wondered where I would use it, so I chose the largest size that would fit in the Engine.
Was the one you received as per Image?
As per Image
I always use KITACO's Sprocket for 4MINI systems because of its good cost performance.
Was the installation difficult?
Since there are 16 chains, the Wide Chain Guide Plate (https://www.webike.net/sd/23863487/) must be installed at the same time.
How was your experience with it?
It is now much easier to drive. Also, since the RPMs were lowered when cruising, fuel consumption was also increased. Two birds with one stone.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Wide Chain Guide Plate (https://www.webike.net/sd/23863487/) is required to protect Crankcase and should be purchased at the same time.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
Grom jc92
I have increased one finger to 16T. I have not ridden a long distance yet, but on a flat road, I can ride as well as I did with the 15T. I don't feel any lack of Torque at the start.
I have not yet put on the Pulse speed converter, but the Meter reading has a very Large error.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA XR100MOTARD
cheap
It's cheap
The JC92 is a 5-speed Mission, but honestly I have no use for 1st gear,
So I decided to use the first gear by setting the Front to 17.
The replacement itself is easy, but please note that the Cover will not be attached unless the bracket of the Sprocket Cover is modified or replaced with another brand product.
It may be the first thing you change when you buy a new car.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA BENRY CD50, HONDA monkey, HONDA Super Cub 50, HONDA dachshund, HONDA jazz, HONDA magna fifty, HONDA Monkey BAJA, HONDA Monkey R, HONDA Monkey RT, HONDA jazz, HONDA magna fifty, HONDA Monkey BAJA, HONDA Monkey R, HONDA Monkey RT
CUB To the Overhaul of the system Engine!
CUB This is a must-have product for the Overhaul of the System Horizontal TypeEngine. Low cost and safe to use. View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100 TypeD
I raised it from 12T to 13T and 13T to 14T.
I went from 12T to 13Th to lower the Engine RPM when driving. I went from 13T to 14T to lower the RPM a little more. Now I can cruise 60km before the engine roars even on a moped. Of course, it is only a moped when going uphill.
When I bought it, I noticed that the Washer shape is different between Takegawa and Tokico (the position of the Bolt hole and the notch to enter the Spline are reversed), so it cannot be fastened without using the Washer included in the package.
View detail
Fits: HONDA CB50JX-1, HONDA CRF100F, HONDA CRM50, HONDA CRM80, HONDA CY50, HONDA GROM, HONDA JAZZ, HONDA MB50, HONDA MBX50, HONDA MSX125, HONDA NS-1, HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA Solo, HONDA XE50, HONDA XE75, HONDA CROSS CUB, HONDA CROSS CUB50, HONDA CHALY 50
I guess I could have raised it another T.
I bought it to raise the front sprocket by 1T because my old moped had power and would dip down. I was able to install it without any problems. After driving it, I thought it would be a good idea to raise the front sprocket by another 1T. View detail
Fits: HONDA XL50, HONDA XR80, HONDA XL80, HONDA XE75, HONDA XE50, HONDA R&P, HONDA CB50, HONDA CHALY 50, HONDA CHALY 70, HONDA JAZZ, HONDA DAX, HONDA DAX70, HONDA Nauty Dax, HONDA MOTRA, HONDA MONKEY R, HONDA MONKEY RT, HONDA APE 50, HONDA APE 100, HONDA GIORCUB, HONDA MAGNA50
I still appreciate the variety of Sizes.
I bought it to make 5TSmall Rear sprocket for my old Motorcycle, but it was too big for the Chain tensioner, but I was happy to use it without packing the Chain. View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
Good
Experience after a month the product has a strange design with holes in the middle to help reduce weight in general is beautiful
Perfect match with kitaco 5 star rated chain and sprocket ----------------------------------- --------------- Experience after a month the product has a strange design with the middle holes that help reduce the weight in general as beautiful Perfectly match with slugs and dynamic rating Kitaco 5 stars Powered by Google Translator
View detail
Fits: HONDA CRF150, HONDA CRF230F, HONDA MBX125, HONDA SPACY125, HONDA LEAD50, HONDA Super Cub delivery90, HONDA Super Cub delivery70, HONDA Super Cub delivery50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA JAZZ 50, HONDA CHALY 70, HONDA CHALY 50, HONDA GORILLA
Different level of braking power
Rear of CUB90 is replaced (Front is Large diameter Drum, so there is no compatible product).
I have seen some stories on the net that it works well, but when I used it on my old AF18DIO, I didn't have the impression that it worked well, so I didn't decide to buy it.
The results are Large satisfactory. As a control experiment I built it in without any DrumLining, no Dust cleanup." The Shoe is now surprisingly effective, and the Shoe is easy to control.
Squeaking sound after rain is also reduced. The cause of the sound is rust on the Casting IronLining side of the drum, so it will not disappear completely.
The way it works is superb, and the more you step on it, the more sure it works, so the Rear locks up on legs that are used to OEM.
The OEM didn't lock it up first.
The OEMShoe's servo effect was so strong that the Shoe did not immediately separate from the Shoe (even though it did not immediately separate from the Shoe, it did so at the Comma second level, which is unstable), but the Daytona did.
I believe that the maintenance around the brake camshaft is also effective, but even if that is subtracted, it is completely different.
Return spring may be a little stronger.
I don't know how fast the reduction is yet, but I have no complaints if it is twice as fast as it was when I was using OEMShoe rather aggressively for 40,000 km and it didn't reduce after all.
I recommend the destruction Brown bitter Brown.
View detail
Fits: HONDA Benry CD70K, HONDA Monkey R, KAWASAKI Neomax 100, KAWASAKI Neomax II, HONDA CB50JX, HONDA CB50S, HONDA CM125T, HONDA R&P CY50, HONDA XE50, HONDA XE75, HONDA XE75II, HONDA XL50S, HONDA Wave 100, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Shari CF50, HONDA Shari CF70, HONDA Spacey., HONDA Spacey 80, HONDA Super Cub 50
First replacement in 15 years since purchased used.
First replacement in 15 years since purchased used.
I've never had any glitches before.
I kind of wanted a new one, so I replaced it.
There is nothing that can be exchanged and experienced.
My mental health has cleared up.
View detail
Fits: HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY BAJA, HONDA MONKEY, HONDA 12VGORILLA, HONDA 12VGORILLA, HONDA 12VMONKEY, HONDA 12VMONKEY, HONDA 6VGORILLA, HONDA 6VMONKEY, Others Vehicles equipped with SP Mukawa's Manual clutch kit, Others Vehicles equipped with SP Mukawa's combination switch
Clutch lever bolt
I think the product itself is satisfactory. The only thing is that the flange bolt for the handlebar cannot be tightened. I wonder if they are inspecting the product. View detail
Fits: HONDA CRF150, HONDA CRF230F, HONDA MBX125, HONDA SPACY125, HONDA LEAD50, HONDA Super Cub delivery90, HONDA Super Cub delivery70, HONDA Super Cub delivery50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA JAZZ 50, HONDA CHALY 70, HONDA CHALY 50, HONDA GORILLA
DAYTONA for peace of mind
say the least DAYTONA for peace of mind.
Brake Shoe replacement while changing tires
The newer the better! That's the spirit!
"OEM" → KITACO → DAYTONA (this product)
I've exchanged it for a
They all sound the same to me...
Well, I haven't driven much since the replacement.
Maybe you just haven't gotten a bite yet.
You can see it in the picture.
I have a KITACO Shoe that I used for almost 10 years (mileage unknown).
I see no decrease at all.
Is it not about the product, but the adjustment?
Keeping it safe
Periodically? Replace it with a new one on a
It's also a great way to change your mind.
I think it was a good purchase.
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Looks cool too:??
Used for VANVAN75.
Starting performance seems to have improved.
There was no change in maximum speed.
It looks pretty much like it.
View detail
Fits: HONDA NSF100, HONDA LITTLE CUB, HONDA CB50, HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion)
LITTLE CUB 75cc with 15T installed
Bore up the LITTLE CUB to 75cc to increase the maximum speed.
Purchased
Bore Up Kit + High Camshaft + Big carburetor from the same KITACO
Tuning was done with the same manufacturer's products, so FrontSprocket also
As soon as I chose it.
It has the same texture as OEM, but is also processed without meat, so it has the same number of teeth.
Is the weight reduction offsetting the increase in
Although only one gun was raised in the OEM ratio (14T), the connection between each GEAR
The balance between Torque and maximum speed is just right even in the city.
I felt that
The number of chain tops is not changed, and the same number of pieces as the OEM is used.
(However, the adjustment with Chain Adjuster is
(Required).
If the vehicle is an 88cc or a vehicle that has been modified up to the engine head, you can use a few more pins.
It might be a good idea to raise it.
I have used KITACO Sprocket in the past for durability.
It is safe to use.
View detail
Fits: Others For SP Mukawa's Clutch Cable, Others Vehicles equipped with SP Mukawa's dry clutch cover, Others Vehicles equipped with SP Takegawa Die Cast Clutch Cover, HONDA XR100 Motard, HONDA XR50 Motard, HONDA 12VMONKEY, HONDA 6VGORILLA, HONDA 6VMONKEY, HONDA Ape100, HONDA MONKEY R, HONDA Ape100, HONDA Ape50, HONDA Ape50, HONDA MONKEY RT, HONDA Ape50, HONDA MONKEY, HONDA MONKEY BAJA, HONDA 12VGORILLA, HONDA 12VGORILLA, HONDA 12VMONKEY
Is this made by Mukawa?
The hex bolt that fixes to the handlebar could not be tightened by either Socket or Spanner.
lick
Replaced with a hand-held hex Bolt with hole
Very disappointed!
I don't understand why the Holder is Black and the Lever is Silver?
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
You can feel the increased power.
Installed with Mukawa Hyper Ignition Coil.
I don't know which helped, but it clearly increased power.
Even uphill climbs, which used to be tough, are now a breeze.
View detail
Fits: HONDA MONKEY, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA NSR50, HONDA NSR80, HONDA NS-1, HONDA NS50F, HONDA MBX50, HONDA CRM50, HONDA CRM80, HONDA MONKEY, HONDA GORILLA, HONDA Monkey Baja, HONDA MONKEY R, HONDA MONKEY RT, HONDA DAX50, HONDA DAX70, HONDA JAZZ, HONDA MAGNA50, HONDA CHALY 50
CUB press 50 AA01 Fi No fit ….
The Bolt was in a different position than the one originally attached.
Since the suppression plate is not included, it cannot be installed if the screw position does not match that of the installed Sprocket.
I'm still not sure if it's a product defect or a non-conformity.
View detail
Fits: HONDA Benry CD70K, HONDA Monkey R, KAWASAKI Neomax 100, KAWASAKI Neomax II, HONDA CB50JX, HONDA CB50S, HONDA CM125T, HONDA R&P CY50, HONDA XE50, HONDA XE75, HONDA XE75II, HONDA XL50S, HONDA Wave 100, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Shari CF50, HONDA Shari CF70, HONDA Spacey., HONDA Spacey 80, HONDA Super Cub 50
Brand as always, you can rest assured!
I always use NGK.
I have never had a haGap and have always had no problems.
View detail
Fits: HONDA CRF150, HONDA CRF230F, HONDA MBX125, HONDA SPACY125, HONDA LEAD50, HONDA Super Cub delivery90, HONDA Super Cub delivery70, HONDA Super Cub delivery50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA JAZZ 50, HONDA CHALY 70, HONDA CHALY 50, HONDA GORILLA
Reinforced Brake Shoe while replacing
I replaced the front and rear with SUPER CUB110 JA10. I think the soft touch adjustment is easier than OEM. I think the soft touch adjustment is easier than OEM. View detail
Fits: HONDA CRF150, HONDA CRF230F, HONDA MBX125, HONDA SPACY125, HONDA LEAD50, HONDA Super Cub delivery90, HONDA Super Cub delivery70, HONDA Super Cub delivery50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA JAZZ 50, HONDA CHALY 70, HONDA CHALY 50, HONDA GORILLA
Might pick the right individual.
Installed front and rear on JA44.
The Front was good, but the Rear inevitably started to drag, so we tried a number of things, but gave up and went back to OEM.
The position of the shoe is quite different from that of the OEM, and it seems to interfere with the drum more easily since the shoe is closer to the Pivot.
I am using the Front as is with no problems as far as effectiveness. The OEM is the same, though it does squeak a bit.
View detail