Reviews
Fits: YAMAHA Remote controller jog, YAMAHA TOWN MATE, YAMAHA Box, YAMAHA VINO(2Cycle), YAMAHA JOG APRIO, YAMAHA JOG POCHE, YAMAHA YV50 Z II, YAMAHA Axis Treat, YAMAHA GRAND AXIS, YAMAHA CYGNUS X, HONDA DIO, SUZUKI VECSTAR150, SUZUKI VERDE, SUZUKI LETS4, SUZUKI LETS5, HONDA LEAD 100, HONDA LITTLE CUB, HONDA LIVE DIO, HONDA FREEWAY, HONDA Byte
Easy to replace. The quality is appropriate for the price. I think it will last for a long time.
I raped the Handlebar Grip of the LETS4 replacement.
Perhaps the grip texture is different from the NORMAL (OEM Product), but this product has a mussed texture. In that sense, it does not slip.
*Working time is 20 to 30 minutes
After chopping off the old Grip with Scissors, I cleaned the old Bond by scrubbing and wiping, sprayed Parts cleaner on the new Grip and tube, and inserted it all at once.
*You can start over.
The Axel side inevitably feels uneven when you hold it, but since it is not an OEM product, this is to be expected.
The rest are fine, a little on the Large size and sticking out.
View detail
Fits: HONDA CD50, HONDA BENLY CL50 (BENLY50), HONDA Broad (BROAD), HONDA CBX125F, HONDA CBX125F, HONDA CBX125C, HONDA CBX125C, HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA CBX125C, HONDA CBX125C, HONDA Broad 90 (BROAD), HONDA CABINA (CABINA), HONDA CABINA 90 (CABINA), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA TACT Basic SPECIAL Knife, HONDA TACT Basic
Replace the old one
I think it is good for city driving, it is enough for slow driving, just my personal opinion. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA ADV150, HONDA LEAD 125, HONDA LEAD 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA SUPER CUB C125, HONDA SUPER CUB C125, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA SH MODE
Good!
[How is it used?
No leakage of waste gas
How was your experience with it?
No problems
How did it compare to other products?
Good cosmetics in a pack of 2
[Points to note]
None
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA BirdCity125, YAMAHA NMAX125, YAMAHA CYGNUS X, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ESTRELLA, KAWASAKI ZZR250R, KAWASAKI ZZ-R250, KAWASAKI ZZR250, KAWASAKI ZZ-R1200, KAWASAKI ZXR750R, HONDA CRF100F, HONDA CBR125R, HONDA Ape50, HONDA ADV150, HONDA Ape100, KAWASAKI GPX400R, KAWASAKI GPZ400R, KAWASAKI GPZ900R
Does a Great Job Keeping the Oil Cleaner on the Grom
About quality and texture: I am happy with the quality of the drain bolt with magnet from SP Takegawa, machined from aluminium with a gloss red anodized surface finish and using a strong rare-earth magnet. About the feeling of use: Well worth the purchase for just the addition of the magnet to help keep the oil cleaner by removing the metallic powder floating around in the engine oil. The hole through the drain bolt is also great when connecting a temperature guage from SP Takegawa. Products to buy together: The reinforced cam chain tensioner from SP Takegawa would also be desirable to purchase along side the drain bolt with magnet for addition engine reliability. Difficulty of installation: The process to install takes 5 minutes, remove the OEM drain bolt and after the oil has finished draining then install and tighten the drain bolt with magnet using a single hex socket to avoid damaging the aluminium. Not difficult to do. Cost performance and comparison with other products: Great costing as you are getting a very high quality manufactured and designed drain bolt for a good price but there are cheaper options if you only want the function of a magnet. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: I see no concerns or cautions to be advised of in regards to this product. If you are looking for the best drain bolt with magnet then go for it, available in a variety of colours too. View detail
Fits: HONDA NCW50, HONDA NCW50, HONDA PCX150, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA WW150 AC, HONDA WW150 AC
Kualitas Produk Sangat Baik Honda Genuine Parts View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
I've always loved it.
It is thick and easy to grip, and I have been using it for a long time. View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Firm and direct feel
I bought these to replace softer "comfort" grips the previous owner installed. Immediately, I noticed an improvement in fine throttle control, and feel more certain of my hand positioning. The material feels firm and provides high grip. I imagine it would perform well in wet weather, too. I would recommend these grips to those who prefer a "direct" feel. View detail
Fits: HONDA Today (TODAY), HONDA Today (TODAY), HONDA Today, HONDA Today, HONDA TACT (TACT), HONDA TACT (TACT), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB), HONDA SUPER CUB 50 CUM (SUPER CUB)
Used in place of OEM Product
Brake lever was bent, so it was replaced.
I chose it because it is not an alternative to OEM and the quality is good.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Bright!
I bought a used VINODELUXE Valve because it was out of stock, so I looked for it and found it.
It is not made in China, which I have never heard of, and which I sometimes see on Amazon and other places. The brightness is nothing compared to the Normal valve. It is bright! It is enough for the speed range of a moped.
It may be a problem on the vehicle side, but switching from Low to High is smooth, but conversely, when changing from High to Low, I feel that it changes with a slight one-tempo13 delay.
View detail
Fits: SUZUKI CHOINORI, SUZUKI ADDRESS, SUZUKI VERDE, SUZUKI SEPIA, SUZUKI ZZ, YAMAHA MINT, YAMAHA PASSOL, HONDA CHALY, HONDA JULIO, HONDA Giorno, HONDA TODAY, HONDA PAL, HONDA MONKEY, YAMAHA BJ, YAMAHA AXIS50, YAMAHA APRIO, YAMAHA JOG, YAMAHA JOG Poche, KAWASAKI KSR-1, SUZUKI LETS
Size is best
The Size feel is perfect for the LITTLE CUB.
Is the texture a step further?
I don't have any particular expectations, but if it lasts for a certain period of time, it will be good.
First, a follow-up.
Since it is with Belt for wind protection, I thought it would be good for Typhoon Season.
The hole for the chain lock is also easy to use because it is moderately large.
View detail
Fits: YAMAHA Vino, YAMAHA Vino, YAMAHA JOG, YAMAHA JOG, SUZUKI XCH50, HONDA XR125LK, HONDA XR125LEK, HONDA XR125L, HONDA XR125, HONDA XL125, HONDA XL125, HONDA Today, HONDA Today, HONDA Today F, HONDA Tact, HONDA Tact, HONDA Tact Basic, HONDA Tact Basic, HONDA Super Cub50 Pro, HONDA Super Cub50 Pro
usually
I don't know about durability yet, but from the initial feeling, I think it is usually good.
Perhaps asking for more would not make much difference.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA ADV150, HONDA LEAD 125, HONDA LEAD 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA SUPER CUB C125, HONDA SUPER CUB C125, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA SH MODE
Reliable Quantities:1 Set of 2pcs. helped!
We prepared this item because we need to remove the Exhaust System when replacing the Rear shock of CT125. As we are planning to replace it with SCRAMBLER Exhaust System next month, we have prepared this product.:1 set of 2pcs. is convenient! However, when we reinstalled the exhaust system this time, we seem to have forgotten to remove the old gasket (W), and it was tightened a little off. Fortunately, there is no leakage, so we left it as it is for the sake of time, but when we have time to work on it, we plan to take it off and put it back on in the proper position. The quantity of the new exhaust system was originally supposed to be used for the new exhaust system next month.:2pc. I was able to use the second set of Gasket, so I did not have to rush to order more.
Since these are inexpensive parts, it is always a good idea to procure several amateur mechanics for this type of Gasket and ORingetc.
View detail
Fits: HONDA gyro canopy, HONDA LEAD 50, HONDA LEAD 50, HONDA TODAY, HONDA DIO(4Cycle), HONDA DIO (2Cycle), HONDA DIO (2Cycle), HONDA TACT, HONDA TACT, HONDA TACT, HONDA ZOOMER, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO
Too inaccurate to use!
It is so inaccurate that I can't use it at all because I can't fit it into a Large, and I can't move the Plate! I replaced it with an OEM one and it worked Smoothly. View detail
Fits: KAWASAKI ZZ-R1200, KAWASAKI ZXR750, KAWASAKI ZXR750R, YAMAHA NMAX125, YAMAHA CYGNUS X, YAMAHA BirdCity125, KAWASAKI ZEPHYR750, KAWASAKI Z125 PRO, KAWASAKI W650, KAWASAKI W400, KAWASAKI Ninja250, KAWASAKI KLX125, KAWASAKI GPZ400R, KAWASAKI GPZ900R, KAWASAKI GPX400R, KAWASAKI GPX250R2, KAWASAKI FX400R, KAWASAKI GPX250R, HONDA MONKEY, HONDA MONKEY125
Can it replace Oil Filter?
ADV150 does not have an oil filter, so I replaced the oil filter with a new one in the hope that it would remove some of the sludge. I thought it would be better if the color was black, as I did not want the color to stand out too much. The quality is very good, but I feel the price is a little high.
The ADV150 Service Manual specifies a torque of 24Nm, but the Instruction Manual included with the product specifies 20Nm. However, the Instruction Manual that comes with the product lists the torque as 20 Nm. Since the material is aluminum, I wondered if this was due to strength considerations, but I think 24 Nm would be fine for the bolt diameter. Perhaps it is a problem with the material of the Washer?
I am a little worried about 20Nm because it would be disastrous if the drain bolt loosens and oil leaks out, but since I always use a Daytona washer, I decided to tighten the bolt to 22Nm for now and see how it goes.
The effect is intermediate because it is not known how much sludge will be removed until the next time the oil is changed.
A Screw and Hexagonal Wrench for attaching the Oil Temperature Sensor are also included but are not used this time and probably will not be used in the future.
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Repeat use. I don't remember how many times I have already replaced it.
I don't like the sticky feel of custom grips on the market.
I have been using it for years.
I was surprised that it had enough gripping power without being sticky.
In fact, it is not sticky to the touch with bare hands, and there is no sense of uneasiness due to its softness.
For wire lock (?) The grooves are cut to allow for use in Race.
[How is it used?
Touring ~ Circuit
Was the one you received as per Image?
YES
Was the installation difficult?
Easy (Installed on external high throttle)
How was your experience with it?
Satisfied
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
[Opinions and requests to Manufacturer
The price is low but the quality is high and there is nothing to say about it.
However, currently there is only a 120mm lineup, so I am eagerly awaiting a 115mm version.
View detail
Fits: HARLEY-DAVIDSON STREET750/XG750, HARLEY-DAVIDSON XG750, HONDA 400X, HONDA CB400F, HONDA CB400X, HONDA CBR400R, HONDA DUNK, HONDA Dio110, HONDA Johno., HONDA Zuma X, HONDA baton, HONDA baton, HONDA Tact Basic, HONDA Benry., HONDA Benry 110, HONDA Benly 110PRO, HONDA Benly Pro, HONDA Rebel 500, KAWASAKI W400, YAMAHA FJR1300 A
All my performance was restored
About quality and texture, I can confirm that the quality is great and that the materials used are a combinations of copper, porcelain and nickel alloy for the standard plugs from NGK. About the feeling of use, After 5000 kms of use with the previous spark plug the throttle response was lacking but after the installation of the new spark plug all my performance was restored. Products to buy together, To maximize the performance of your spark it would be ideal also add an upgraded hyper ignition coil from Takegawa to your cart. Difficulty of installation, I can say the fitment of the spark plug for my installation was very easy due to the ease of access to the cylinder head and simple nature of the task. Cost performance and comparison with other products, The pricing of the product is great. You receive a spark plug made of quality materials from well known brand. Pricing of stand spark plugs from other brands is similar where iridium spark plugs are much more expensive. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: YAMAHA NMAX125, HONDA ZOOMER-X, HONDA CROSS CUB50, HONDA SUPER CUB 50PRO, HONDA MSX GROM, HONDA PCX160, HONDA ADV150, HONDA Dio110, HONDA ZOOMER-X, SUZUKI Address125, HONDA FORZA, HONDA PCX, HONDA PCX, HONDA MSX125SF, HONDA DAX125, HONDA MONKEY125, HONDA SUPER CUB110PRO, HONDA CROSS CUB, HONDA PCX150, SUZUKI GSX-R125
Highly detailed
About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with an all silver anodized finish. About the feeling of use, These handlebar ends are highly detailed in their design when compared to the original plain black ones and add a quality finish to the original handlebars. Products to buy together, Other highly detailed parts to help improve the look of other original plain looking parts like the front brake reservoir would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the handlebar ends for my installation was very easy due to the ease of access and simple nature of securing the ends to the original handlebar inserts. Cost performance and comparison with other products, The pricing of the product is great. You receive a much improved design part made from higher quality material with a matching finish. There are cheaper options available but these are well worth the money. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA ADV150, HONDA LEAD 125, HONDA LEAD 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA SUPER CUB C125, HONDA SUPER CUB C125, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA SH MODE
Used to replace Exhaust System of CUB
I used it to replace the Exhaust System on my ja58.
It was a very normal exchange.
It comes in a 2-pack, so I will use it when I return it to the OEM Exhaust System.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Bright!
The Halogen bulb was no longer working, so I decided to replace it anyway!
I had previously purchased an LED that claimed to be an "explosive light" on the Internet, but it was the exact opposite, being darker than the original and thus useless, so I wondered if this would be the same. I was a little bit nervous about purchasing it and installed it with Tokyo Do Reflector Light and some modifications, but I am happy to say that it is bright and has perfect visibility!
However, I need to note that the OEMGlass Lens Light of the old CUB I tried is not able to secure the Stroke of the LED Lamp - so I need to be careful!
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
The total length is long, so make sure to check in advance.
[How is it used?
The Headlight Bulb of the LITTLE CUB that was given to me was out of order, so I searched for a replacement bulb to brighten it up.
Was the one you received as per Image?
A little longer overall than I thought?" I felt that the LDE sphere is like that?
The product was generally in line with the Image.
How was your experience with it?
I immediately replaced the OEM bulbs and PonLEDs that had gone black due to bulb failure and checked the headlight from the front, and found that it was close to the lens side of the headlight (not hitting the Lens, but the Clearance was about 5mm).
I did the work without checking the Instruction Manual & notes on the back of the Package due to my bad habit, but the back of the Package has a *Not available for MONKEY, APE, and SUPER CUBSeries. (Electrically not compatible with FI (Injection) Spec. cars of these models. (Also, carburetor spec. cars cannot be installed due to their dimensions. It was firmly stated.
LITTLE CUB is Material:I wonder if it was possible to install the plastic Lens because it is thinner than the old SUPER CUB's Glass Lens. However, there is a possibility that the heat generated by the LED bulb may affect the Lens, so we would like to monitor the progress at our own risk (likewise, those who install the Lens should do so at their own risk).
I started the engine and checked the light...it was so bright that I felt sorry to compare it to the OEM (the battery is completely dead, so there is a slight flicker at low rpm...) I am looking forward to driving after the Restore.
[Points to note]
As mentioned above, there are some car models that cannot be installed (for electrical or physical reasons), so do not purchase without thinking, as I did, and make sure to confirm the installation beforehand.
How did it compare to other products?
As for the CUB, I only know the OEM Headlight Bulb and the PonLED (and the PonLED was cheaper than the P7noHalogen bulb), so I can't say too much about the large size, but it is wonderfully bright compared to the OEM lantern light.
However, I will have to continue to check the LEDs in the future, as they sometimes make it harder for my old eyes to see what is in front of me in the rain.
Other items that would be helpful
Point and hang of installation
No difficult wiring etc., and can be installed in the reverse order of how the OEM bulbs were removed.
Large is strong, and it's not difficult.
[ITEMS TO BUY TOGETHER
If you only need to replace the Headlight Bulb, this product alone is Large sturdy (you will need the right tools for the job), but if you also want to replace the Blinker and Dale, you should also purchase products that meet your requirements.
[Opinions and requests to Manufacturer
When it comes to Motorcycle light bulbs, I trust Mats Stripe.
View detail