Reviews
Fits: HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50
Carbon bite repair
Most of the carbon bite symptoms are caused by the Valve on the exhaust side.
It is recommended to stock the exhaust valve.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
PONLED PONLED LED Bulb!
I bought this product after looking for a Type LED Bulb that I could simply replace the bulb with.
4.I used it for the headlight of ADDRESS V100 which was converted to 5-inches Bates Headlight. Since the tip of the LED Bulb touches the Lens surface of the headlight, I shaved the tip of the Valve a little and installed it to secure the Clearance.
There are no particular problems with brightness or installation, but it is necessary to pay attention to the size of the light case used and the overall length of the Valve, etc.
It is easy to convert to LEDs by simply replacing the Valve without any wiring work.
Incidentally, it is compatible with both DC and AC.
View detail
Fits: HONDA CUB [Cub]., HONDA CUB [Cub]., HONDA CUB90 [Cub]., HONDA GROM [grom]., SUZUKI ADDRESSV100 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI BIRDIE [Birdie]., SUZUKI Birdie 50, SUZUKI Birdie 50, YAMAHA GEAR [gear]., YAMAHA Town MATE90 [Mate]., YAMAHA News MATE [Mate]., YAMAHA News MATE80 [Mate]., YAMAHA News MATE90 [Mate]., SUZUKI DF125, HONDA APE100 [Ape].
HUNTER Grips
HUNTER Grips Excellent grips, good pattern, good value for money. Universal option for almost any moped. I take not the first time, everyone is happy! Great grips, good pattern, good value for money. Universal option for almost any moped. I take not the first time, everyone is happy! View detail
Fits: HONDA XR50 MOTARD, HONDA APE 50, HONDA MONKEY, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA CD50, HONDA BENLY50S, HONDA CL50, HONDA JAZZ, HONDA GIORCUB, HONDA solo, HONDA APE 100, HONDA XR100MOTARD, HONDA SUPER CUB110, HONDA DIO, HONDA SUPER DIO, HONDA LIVE DIO, HONDA G DASH, HONDA Giorno
SUPERThrottle
The Grip I had before was too Garbage, so I installed this product. The grip feels comfortable, and it does not slip when I hold it. It was a good decision. View detail
Fits: YAMAHA Tricity155, YAMAHA NMAX155, HONDA CB500F, HONDA CB500X, HONDA CBR500R, YAMAHA VINO, YAMAHA MAJESTYS XC155, YAMAHA DELUXE, YAMAHA TRICITY125, YAMAHA TRICITY125ABS, YAMAHA JOG, YAMAHA TRICITY 155 ABS, YAMAHA NMAX 155, YAMAHA NMAX, YAMAHA FJR1300 A, YAMAHA FZ16, YAMAHA FJR1300 AS, SUZUKI V-STROM650, SUZUKI V-STROM650 XT, SUZUKI SV650X
Improved blow-off
I didn't have high hopes for this plug, since I've heard that changing plugs doesn't give you any particular experience, but when I opened Axel, it was clear that it burned more consistently. I can't go back to Normal plug. View detail
Fits: HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50
No need to take BALI
It is a HONDAOEM Product and is well made.
It seems to me that there is no need to take BALI or anything like that.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 90, SUZUKI K50, SUZUKI K80, SUZUKI Birdie80, SUZUKI Birdie90, YAMAHA BWS, YAMAHA CHAMP CX, YAMAHA MATE NEWS 50, YAMAHA MATE NEWS80, YAMAHA MATE, YAMAHA TOWN MATE80, YAMAHA JOG POCHEtt, YAMAHA Axis Treat, YAMAHA GEAR C, YAMAHA YSR50, YAMAHA YSR80, YAMAHA AXIS 90, YAMAHA VOX, YAMAHA YB50
sturdy
I was worried because I didn't know the texture etc. until it arrived, but there are no problems.
The sturdiness of the product makes it too bulky at the end of the day.
View detail
Fits: HONDA 400X, HONDA CB223S, HONDA CB250, HONDA CB400F, HONDA CB900, HONDA CBR125R, HONDA CBR400R, HONDA CBR650F, HONDA CBR945RR, HONDA CBX250, HONDA CBX250, HONDA CRF250L, HONDA CROSSCUB [Crosscub]., HONDA CTX700, HONDA CTX700, HONDA CUB90 [Cub]., HONDA DAX [Dax]., HONDA DUNK [DUNK]., HONDA FORZA-Si [Forza] (MF12), HONDA GIORCUB [Giorcub].
Oil Level Gauge O-Ring for the Grom
About quality and texture: I am happy with the quality of the oil level gauge O-Ring from K-Pit, made from a soft flexible rubber to help create a good seal. About the feeling of use: The previous owner had significantly over tightened the oil level gauge and damaged the O-Ring, the K-Pit O-Ring fits perfectly with zero leaks. Products to buy together: The timing and crankshaft hole cap O-Rings from K-Pit would also be desirable to purchase alongside oil level gauge O-Ring. Difficulty of installation: The process to install just takes a few minutes, remove the oil level gauge, be sure to discard the old O-Ring and then fit your new O-Ring that has been lubricated lightly with engine oil. Do not over tighten the oil level gauge as if only needs to be finger tight. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a quality part from K-Pit that was in stock and ready to ship unlike the Honda O-Ring but the K-Pit O-Ring is slightly more expensive. About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: View the Kitaco engine tuning and maintenance parts catalog to see what other maintenance parts K-Pit have to fit the Grom and the Monkey 125. View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Cospa strongest
It is now so bright that it is dazzling.
Recommendation.
Commendation for commuting to work and school
View detail
Fits: HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50
Gasket required for Overhaul above waist
In Overhaul Above the Waist
Necessary when replacing Piston and Piston ring.
View detail
Fits: YAMAHA Tricity155, YAMAHA NMAX155, HONDA CB500F, HONDA CB500X, HONDA CBR500R, YAMAHA VINO, YAMAHA MAJESTYS XC155, YAMAHA DELUXE, YAMAHA TRICITY125, YAMAHA TRICITY125ABS, YAMAHA JOG, YAMAHA TRICITY 155 ABS, YAMAHA NMAX 155, YAMAHA NMAX, YAMAHA FJR1300 A, YAMAHA FZ16, YAMAHA FJR1300 AS, SUZUKI V-STROM650, SUZUKI V-STROM650 XT, SUZUKI SV650X
Amazing upgrade!!
This is an amazing upgrade over the stock spark plug NGK MR8E-9 for my Suzuki V-Strom SX!! Gear shifts at low RPMs have become much more smoother. No more engine vibrations at low RPMs! This has totally improved riding pleasure of my motorcycle. Thank you Webike for delivering the order in less than two weeks in India!! View detail
Fits: HONDA CRF250R, HONDA CRF450L, HONDA NCW50, HONDA CHF50, HONDA CHF50, HONDA CHF50, HONDA CHF50, HONDA CHF50, HONDA CHF50, HONDA CHF50, HONDA CHF50, HONDA CHF50, HONDA CHF50P, HONDA CHF50P, HONDA CHF50P, HONDA CHF50P, HONDA CHF50P, HONDA CHF50PS, HONDA CHF50PS, HONDA CHF50S
No problem as it is a HondaOEM Product.
Other Brand Product is $39, but in case this is damaged.
We are on the verge of scrapping the car, so we decided to go OEM.
View detail
Fits: HONDA ZOOMER, HONDA BENLY (BENLY50), HONDA BENLY (BENLY50), HONDA BENLY PRO (BENLY50PRO), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY(SCOOPY CREA), HONDA crea SCOOPY(SCOOPY CREA), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i Special (SCOOPY CREA i SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife)
I used it on my ADDRESS V50 CA42A.
After more than 10 years of use, the OEM exhaust system had a hole in it and had to be replaced. At that time, we used this Gasket. I could have reused the old Gasket, but I replaced it with this new Gasket just to be safe because the hole shape of the new Exhaust System is slightly different from the old one. First, the old Gasket was pried off from the body using a slotted screwdriver. I think it is possible to put the Gasket around the hole on the Exhaust System side and press it from the bottom, but there is a groove on the Body side to fit the Gasket. However, there is a groove on the Body side where the Gasket fits, so I think it is safer to fix the Gasket on the Body side with Liquid Gasket. I think it is better to use a Torque wrench that can measure from 5 to 25 Nm. View detail
Fits: YAMAHA Tricity155, YAMAHA NMAX155, HONDA CB500F, HONDA CB500X, HONDA CBR500R, YAMAHA VINO, YAMAHA MAJESTYS XC155, YAMAHA DELUXE, YAMAHA TRICITY125, YAMAHA TRICITY125ABS, YAMAHA JOG, YAMAHA TRICITY 155 ABS, YAMAHA NMAX 155, YAMAHA NMAX, YAMAHA FJR1300 A, YAMAHA FZ16, YAMAHA FJR1300 AS, SUZUKI V-STROM650, SUZUKI V-STROM650 XT, SUZUKI SV650X
Use.
After using it, it turns pleasantly at high RPM, but
I'm driving the same way I used to, but my fuel economy is much worse.
Up until now, I used to run about 35km/L at worst, but now I am not running 30km/L.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
It's still bright.
The headlight is dark and I had been holding back because I had read that Halogen bulbs would melt the lenses. I had to remove the Valve Reflector, but it can be removed by removing one screw from each of the screwdrivers.
It is still totally bright. The low power consumption eliminates flickering even when Idling.
View detail
Fits: YAMAHA Tricity155, YAMAHA NMAX155, HONDA CB500F, HONDA CB500X, HONDA CBR500R, YAMAHA VINO, YAMAHA MAJESTYS XC155, YAMAHA DELUXE, YAMAHA TRICITY125, YAMAHA TRICITY125ABS, YAMAHA JOG, YAMAHA TRICITY 155 ABS, YAMAHA NMAX 155, YAMAHA NMAX, YAMAHA FJR1300 A, YAMAHA FZ16, YAMAHA FJR1300 AS, SUZUKI V-STROM650, SUZUKI V-STROM650 XT, SUZUKI SV650X
Windshield IRIDIUM to Ruthenium
CB250R stalls when twisting Axel after ColdStart
I introduced MotoDX Plug in the hope that it would improve my symptoms.
OEM will be Iridium plugs and MotoDX will be RutheniumPlugs.
The results remained the same.
I called the Honda consulting office and asked them to check with the engineering department.
The CB250R was supposed to stall if the Axel is opened during warm-up operation.
I'll take a look at it in a bit.
View detail
Fits: HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50, HONDA NCW50
Required for Overhaul above the waist
Because it is always necessary for Overhaul above the waist in Cylinder head cleaning. View detail
Fits: HONDA NCW50, HONDA CHF50, HONDA CHF50, HONDA CHF50, HONDA CHF50, HONDA CHF50, HONDA CHF50, HONDA CHF50, HONDA CHF50, HONDA CHF50, HONDA CHF50P, HONDA CHF50P, HONDA CHF50P, HONDA CHF50P, HONDA CHF50P, HONDA CHF50PS, HONDA CHF50PS, HONDA CHF50S, HONDA CHF50S, HONDA CHF50S
OEM is the only choice for drivetrain
Rather than putting it on externally and breaking the Drive pulley.
It is safer to use OEM Product.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA ADV150, HONDA LEAD 125, HONDA LEAD 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA SUPER CUB C125, HONDA SUPER CUB C125, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA SH MODE
Small Additional Price to Pay When Installing a New Exhaust on the Monkey 125
About quality and texture: I am happy with the quality of the exhaust system gasket from Kitaco. A compressing gasket with an external diameter of 32mm and an internal diameter of 26mm. About the feeling of use: The exhaust system gasket is a firm fit and holds itself in place once positioned and has sealed the interface between the exhaust port and the exhaust pipe with zero air leaks. Products to buy together: Some replacement exhaust stud nuts would also be desirable to purchase along side exhaust system gasket as mine were cosmetically damaged from using an open end spanner due to the thickness of the exhaust pipe and not being able to use a socket. Difficulty of installation: The process to install took about 30 minutes, loosen the exhaust stud nuts so you can lower the exhaust pipe to access the exhaust port to replace the exhaust system gasket. The old exhaust system gasket was very tight and difficult to remove on this motorcycle and required the use of a small flat screwdriver to lever it up from the bottom edge and I would recommend using something softer as the screwdriver slightly maked up the exhaust port surface. Refit the exhaust stud nuts and tighten to 27N.m. Cost performance and comparison with other products: Good costing as you are getting two quality gaskets from Kitaco that are always in stock and ready to ship but the genuine Honda gasket is slightly cheaper but you have to wait a while for stock to be available. About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Kitaco or K-Pit offer many replacement gaskets for the Monkey 125 that can be viewed in the Kitaco engine tuning and maintenance parts catalog and stock is available and ready to ship here on Webike. View detail
Fits: HONDA CRF100F, HONDA CRF100F, HONDA CRF70F, HONDA CRF70F, HONDA CRF80F, HONDA CRF80F, HONDA DJ-1, HONDA DJ-1, HONDA DJ-1, HONDA DJ-1, HONDA DJ-1, HONDA DJ-1, HONDA TLM50, HONDA TLM50, HONDA XLR80, HONDA XLR80, HONDA XR100R (for competition), HONDA XR100R (for competition), HONDA XR70R, HONDA XR70R
Exchange from OEM
[How is it used?
The XR100R has front and rear drum brakes, and perhaps because I am used to disc brakes, the brakes do not work very well.
I had a near-miss on a forest road when the rear brake didn't work...so I decided to replace it for safety. When I opened the drum, I found that the OEMShoe was still full, but there was a burn mark on it. I opened the drum and found that the OEMShoe was still full, but there was a burnt mark.
How was your experience with it?
The control of the brake has also been improved and it is easier to handle. I haven't driven on forest roads yet, so I will check it out when it gets warmer.
How did it compare to other products?
I considered other Shoes, but the price was lower, so I went with this one.
[Points to note]
It is quite troublesome to replace the shoes, and it is difficult to install the spring that holds the shoes together. Be careful not to skip the spring by mistake.
Don't forget to clean the inside of the Drum as you remove it.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
nothing special
View detail