Reviews
CODE AxleBolt
Purchased this product because I replaced the front axle with a KOOD one.
The coolness, design, and texture are very good, but the price is rather expensive, which is a little disappointing.
However, only Black is Material:I am concerned about whether the plastic will crack due to deterioration.
Repair Parts would be nice
View detail
Fits: HONDA CB1100, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D
Brake service kit
super quality, genuine product.Made in Japan.perfectly Mach with repairing brake pump.Highly recommend for honada lovers View detail
Easy to control
I use this Repeater on my Honda 400X. It is not very effective, but the Touch Fee Ring is very easy to control. I use it for my daily commute and it is easy to use in all weathers and traffic jams. I replaced it after 2.5 years with the OEM and replaced it after 1.5 years with this product. This time I felt that there was a little bit of BALI on the end face of the product, so I removed the BALI on the end face with File. (Is there a slight variation in quality from lot to lot?) View detail
New FuseHonda replacement
15A Flat Type Fuse.
It seems to be available at HondaOEM Product, and for some reason, the selling price of HondaOEM Product's Fuse is lower than that of the single item sold outside the company.
For Single Item purchases, this HondaOEM Fuse is better value for money.
View detail
Thank you for your quick response!
It was very worn, so I had to replace it as soon as possible….
I ordered the product and got it sooner than I expected.
Thank you for your quick response.
View detail
It's good because it lasts a long time and is hard to handle.
[How is it used?
It was installed on the front caliper and rear caliper of a YAMAHA TZr50R under restoration.
I thought the Pat Pin was rusty because it was an abandoned vehicle, but it was in beautiful condition thanks to this product.
Was the one you received as per Image?
We disassembled Caliper and cleaned it lightly, but it was clean enough to be usable as is.
Once again, it was a good price to purchase the product, so it was helpful. I like that it is durable as a product.
Was the installation difficult?
For those who can tinker with Caliper, I don't see any particular problem.
How was your experience with it?
I can't get a feel for the performance, but it seems to be fine.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
View detail
Inexpensive, no problems
[How is it used?
Oil Filter was also changed along with Oil replacement of XJR400R.
To be frank, I was happy with anything, so I chose this product based on DAYTONABrand and the low price.
How was your experience with it?
Naturally, there is absolutely no problem with the quality of the product.
How well it serves as a Filter is unknown, but I wonder if there is a Large difference in any Large body product.
This is an oil filter that will not fail if the Torque is observed and tightened securely.
How did it compare to other products?
I also used KIJIMA and Vesra filters based on availability, etc., but none of them were particularly noteworthy.
[Points to note]
Torque management daiji.
【Review】
There is nothing particularly wrong with being inexpensive.
Depending on the car model, the O-ring on the cap portion may be a quantity.:Some of them are set, and I think the Filter is the same there as well, so if you have a car model that has the setting, you can use the Quantity:I think it could be a Set.
View detail
Replace with new one
I purchased this product to replace the old one with the new one because it is a Fuse and I think it is OK even if it is old in terms of performance, but it is a Honda OEM Product, Single Item and the price is not too expensive. View detail
Fits: HONDA ST1100 A, HONDA XL1000V VARADERO, HONDA HURRICANE, HONDA ST1100, HONDA Shadow slasher750, HONDA SHADOWCustom, HONDA Shadow classical, HONDA CB400 SB, HONDA CB400F, HONDA CB400 SE, HONDA GOLD WINGSE, HONDA GOLD WINGF6B, HONDA GOLD WINGF6C, HONDA GOLD WING, HONDA Integra, HONDA Integra, HONDA Africa Twin, HONDA Integra S, HONDA Africa Twin, HONDA XRV650J
Cl500
I bought a Daytona while looking for an oil filter. The outer diameter of 64mm seemed to fit perfectly. I didn't buy it to use it right away. The price was cheap and it was a first-hand product, so I bought it with confidence. The dimensions were not written in detail. Other products also have the product dimensions written on them so that consumers can easily use them. I would like you to know if it is possible ----------------------------------------------------------- -------------- I bought the dayon while I was looking for an oil filter. I think it's perfect for 64mm. I didn't buy it to use it right away. The price is cheap and it is a Japanese product. I want you to know if it can be Powered by Google Translator View detail
Fits: HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA ADV150, HONDA C70, HONDA C70, HONDA C70, HONDA C70, HONDA CB1100F, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750K, HONDA CB750K, HONDA CB750K, HONDA CB750K
Genuine Honda Cap Tappet Adjusting for CRF50F
This was a part needed for the small off roader I have in my back garage. The old one had been messed up with adjusting with the wrong tool. Not by myself but who ever had the bike prior to me. The part was easy to find by cross referencing Honda parts catalogue. I do always have more than one part in my orders as it saves on total shipping costs. EMS was used on this occasion and my order arrived in 5 days from shipping. Each part in my order was well packed and arrived in perfect condition. Now the cap is nothing special but it does have an important job to do. I made sure all the part was cleaned and installed correctly and now it looks a lot better and I can actually adjust with zero issues. Well pleased. Thanks Webike. View detail
CB1300SBRearPad installed
This is the second time I have purchased this product. I have used it mainly for running events and Gymkhana, but compared to other companies, it does not cry even when I apply Cost surface and RearBrake frequently, and the BrakeField does not boil up, so I would like to continue purchasing it. View detail
No problems so far.
[How is it used?
NSR250R (MC21) The original Regulator of the "M" was replaced because it was defective.
I had assumed that OEM parts would be quite expensive, but after purchasing the product, I learned that there was not that much difference in Large.
Was the one you received as per Image?
What has been attached so far (OEM？) There are slight differences between the two, but they are generally the same shape.
Was the installation difficult?
With MC21, I couldn't access directly, so I had to remove the Tail cowl before I could work on it.
If Cowl is removed, access is possible from both SIDE, so it is not that Large strange.
How was your experience with it?
The voltage became unstable while driving, and the power consumption became higher when the headlight was turned on.
I have a voltmeter on the car body, Idling, and the voltage is now stable while driving.
So far the symptoms related to Regulator have been cured, but I am a bit worried because many of the past Impressions I have seen have been ruined after a while.
At least it is working properly for now.
[Included Parts:were they on?
Boltetc. must be prepared separately or use the one that came with the product.
[Was there anything that disappointed you?
I'm happy with it so far.
【Review】
I have just started using it and have had no problems with it.
To be honest, there is not that much price difference between OEM Parts and OEM Parts at the moment, so OEM may be a safer choice.
View detail
Cable Fixing
The band that clamps the Main Harness is old and was purchased to replace it with a new one.
It is helpful that the same HondaOEM is sold as the product used, but the price is not that cheap at 1 pc.
View detail
Fits: HONDA CB-1, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR600F, HONDA NSR250R, HONDA NSR250R, HONDA RVF400, HONDA VFR400R, HONDA VTR250, HONDA VTR250, HONDA VT250 Spada, HONDA jade, HONDA CBR600F, HONDA foresight, HONDA CBR600F, HONDA CB600, HONDA CB400FOUR (water-cooled), HONDA CBR600F, HONDA VFR750F, HONDA CBR250RR (MC22)
I was thinking OEM.
It was a little cheaper than HondaOEM and I thought it would be the same, so I used it, but it seemed to heat up quite a bit and I was worried, so I replaced it.
After all, it is safer to use HondaOEM Product even if it is a little expensive.
View detail
Fits: HONDA ST1100 A, HONDA XL1000V VARADERO, HONDA HURRICANE, HONDA ST1100, HONDA Shadow slasher750, HONDA SHADOWCustom, HONDA Shadow classical, HONDA CB400 SB, HONDA CB400F, HONDA CB400 SE, HONDA GOLD WINGSE, HONDA GOLD WINGF6B, HONDA GOLD WINGF6C, HONDA GOLD WING, HONDA Integra, HONDA Integra, HONDA Africa Twin, HONDA Integra S, HONDA Africa Twin, HONDA XRV650J
Purchased for 778
Replacement for 67926? Purchased with the following information.
I know you want to organize the part numbers, but a normal search by Motorcycle's name would bring up the higher end Filters, and I thought the method was too stingy.
The quality is made by DAYTONA and I have been using it for about 60,000 km so far while replacing it and I have never had any problems!
Be careful not to mistake the part number for the corresponding car model!
View detail
Fits: HONDA VT750CD2, HONDA VT750CD2, HONDA VT750CD2, HONDA VT750CD2, HONDA VT750CD2, HONDA VT750CD2, HONDA VT750CD2, HONDA VT750CD2, HONDA VT750CD2, HONDA VT750CD2, HONDA VT750CD, HONDA VT750CD, HONDA VT750CD, HONDA VT750CD, HONDA VT750CD, HONDA VT750CD, HONDA VT750CD, HONDA VT750CD, HONDA VT750CD, HONDA VT750CD
exchange
The PGM was broken, so it was replaced with a new Harness, Battery, and a new set of Harness, Battery, and Regulator.
According to the Parts List, it was 31600-MV4-000, but it seems to have been changed to 31600-MV4-010 here.
View detail
Fits: HONDA PC800 AC, HONDA PC800 AC, HONDA PC800 A, HONDA PC800 A, HONDA CB400F AC, HONDA CB400F AC, HONDA CB400F A, HONDA CB400F A
Battery
The electrical components seem to have been damaged by overcurrent in the
RectifierASSY.，Reggie 31600-MV4-000 is also purchased for replacement.
I looked it up on Parts List and purchased it, but when I received it, the number was different.
31600-MV4-010 arrives, probably because it is a common part and compatible, but ordered the wrong one? Or did I receive the wrong one? I'm wondering if I ordered the wrong one, or if I received the wrong one.
View detail
Fits: HONDA XL600V, HONDA XL600V, HONDA XL600V, HONDA XL600V, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VT750, HONDA VT500FT, HONDA VT500FT, HONDA VT500FT, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500
Genuine Honda Spare Blank Key for XR650L
I had an issue with the ignition barrel and snapped the key in the process. After a lot of pushing and pulling the key decided to snap, my bad. So I did not have to go and buy a totally new set of locks, I had an old set hanging around and decided I would get the lock set cut with a new key, this is where the new blank key comes in.I could have just got some random generic key but as this is an essential part that needs to work every time,I went for the genuine Honda one. The part number was not particualrly hard to find and Webike had these available. Win, win. The price was very reasonable and better than could have sourced locally. There were a few other parts in my order and all were shipped with EMS and arrived in 5 days. All my parts were received in perfect condition. The key even came in a small Honda bag which was a nice touch. The key has a really good and solid feel to it. Although it is a blank, the edges are smoooth as you would expect. I got the key cut and installed my new/old lock set. All works perfectly and now I can get my seat off. Thank you Webike, great job. View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
It's not noticeable, but it's a dress-up!
Little by little, we are doing Small Sana Custom.
This time, we installed this CylinderCap.
Prepare Screwdriver and the replacement is complete in a few minutes.
The subdued gold color gives it a subtle presence.
It is a modest dress-up, but I am satisfied.
MORIWAKI products indeed.
View detail
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
High but improved maintainability
[How is it used?
I'm concerned about rust on the pad pins since we are in a salt-affected area.
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
Durability to be determined, Pad slides well.
[Included Parts:were they on?
None
[Was there anything that disappointed you? None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail