Reviews
NGK Iridium Spark Plugs For HONDA HORNET250 (CB250F)
The cost was very good and purchased a set of 4.I used EMS this time and everything arrived within a week. All packaged very well and no damage to anything in the order. Webike added additional bubble wrap for some of the parts to keep everything nice.Thanks Webike View detail
About the feeling of use
Good produt.Performance was increased and it lasted a long time.About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
first service clutch slave cylinder
I ordered some Honda OEM parts for my Honda VFR 800 VTEC (part number in pictures), to first service clucth slave cylinder after 20 years old. All parts fit old clucth slave cylinder and it took me about 30 minutes to assember. View detail
Magnet works effectively
It is cheap and the performance is perfect. However, I don't think it has much of a dress-up effect because it is usually invisible, even though it is Blue in color. View detail
Fits: HONDA Hornet-S, HONDA AX-1, HONDA CB650F, HONDA CBF600, HONDA CBF600 ABS, HONDA CBF600S, HONDA CBR250R, HONDA CBR250RRR, HONDA CBR600F, HONDA CBR650F, HONDA CBR900RR Fireblade, HONDA VFR750F, HONDA VFR800, HONDA XR250R, HONDA hornet
Plug
I always use NGKPlug, and I have no problem with Standard Plug BP5HA for touring. I replace it regularly before it reaches the end of its service life. View detail
Fits: HONDA Hornet-S, HONDA AX-1, HONDA CB650F, HONDA CBF600, HONDA CBF600 ABS, HONDA CBF600S, HONDA CBR250R, HONDA CBR250RRR, HONDA CBR600F, HONDA CBR650F, HONDA CBR900RR Fireblade, HONDA VFR750F, HONDA VFR800, HONDA XR250R, HONDA hornet
Plug
I always use NGKPlug, and Standard Plug BP5HA is sufficient for touring use. I replace it regularly before it reaches the end of its service life. View detail
Rubber
The quality of the product is as good as OEM, and I appreciate that the price is lower than OEM Equivalent Product. View detail
Premium.
When we decided to use the front fork overhaul, we were not sure whether to go with the less expensive OEM or SKF.
When I opened the package and looked at the product, there was no BALIetc. at all, and the finish was very clean,
Also, during the overhaul, I inserted it into the inner fork and felt slightly less resistance than the OEM when moving it. As a result, SKF was the right choice.
The Dust Seal also has a Spring to prevent foreign objects from entering. The difference in the casual appearance is very satisfying.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
Parenthesis OK
Simple and the texture was good. View detail
Good product
It is carefully made and Fashion. Easy to install. View detail
Replace Old One
he light on the meter panel was not working so I replaced the bulb with ordered ones. This item HondaOEM is not that expensive. fast shipping safety packaging. recomented. thanks webbike team. View detail
Received today
I ordered 4 plugs and it's received today but still not installed. fast shiping and packaging is very safety.thanks webbike team.highly recomended. two boxes are differ with others but it's not an issue i have been check it using barcode scanner all 4 are original. View detail
Replace Old One
The light on the meter panel was not working so I replaced the bulb with ordered ones. This item HondaOEM is not that expensive. View detail
Good quality
This is used in honda hornet 250 footrest rubber.Genuine product. made in Japan. Made with good quality rubber material. View detail
cheap
This is the second time I have purchased this product. Last time, the rubber broke after about 10 months of use. It is not durable. I think it depends on how you think because the unit price is cheap. I don't mind the hollow caps feeling while driving. View detail
Size was not suitable for CBR1000RR-R.
[How is it used?
It is used in a covered outdoor parking lot.
I am using it on a CBR1000RR-R, which is listed as a compatible model, but the size is too large.
I think it is also due to the fact that I am using Mirror in a folded state, but the excess part of the Cover contacts the ground quite a bit.
Due to the nature of the product, many people will use it outdoors, but the Cover will stick to the ground when it rains.
[Points to note]
If you are thinking of using it on CBR1000RR-R, we recommend you to buy 1Size or 2SizeSmallest one.
View detail
Rubber added to Change Pedal for off-road motorcycle
I have been riding motorcycles for almost 50 years and have ridden more than 20 motorcycles, but recently I bought my first 2nd off-road motorcycle by Ponhang. Change pedal is a cylindrical piece of steel, Brake pedal is made of GizaGiza steel, Kick pedal has no rubber. Kick pedal has no rubber. Everywhere you go, shoes get scratched, soles hurt, and Kick pedals slip if you're not careful. In addition, they only stick to the toes. I have never ridden a motorcycle with such a bad footing.
As I wondered why anyone would buy such a thing, it occurred to me that I had bought an off-road vehicle even though I had no intention of driving on mountain roads at all. When I bought a KS-2 a while ago, it was still cute, so I could forgive the similarities, but this KMX125 is bare of ironiness and cheap plastic here and there.
I bought this rubber because I thought it would be easy to fit a thicker cylindrical Change pedal to prevent the toes of Sneakers from getting scratched. I burned an iron rod to a bright red color and inserted it into a new Change rubber several times to make the hole larger.
I don't know how long it will last, but I think it will keep the toes of my shoes from being damaged. By the way, I have a better one installed on my Harley883 that wraps around with Magic tape. This one is Ponhang's, so I think this will be just fine.
View detail
Cheap and easy-to-use Motorcycle Cover that easily protects your car from weather and theft.
[How is it used?
The purpose is to prevent age-related deterioration and staining due to weather, since the bicycles are parked outdoors in the open air.
Also, the purpose of preventing tampering and theft.
Was the one you received as per Image?
Based on the image and dimensions Size, it is almost exactly as shown in the Image.
How was your experience with it?
? Water repellent finish
? Silver coating that reflects direct sunlight
The Mirror part and the Blue fabric are made of
The turnaround is Accent on the Design.
The keyhole is designed for large locks, and PPTape is used.
Separate colors are used for easy distinction between front and rear.
(Front wheel:Red Rear wheel:Black)
- Buckle at the bottom of the vehicle body Prevent wind fly Belt
Equipped with
? Robust sewing with double needle Sewing machine
? Use 75 denier Polyester taffeta
[Points to note]
I've also noted this clearly in Manufacturer as a precaution,
How to use and care for it.
Do not apply Cover to vehicles that have been wetted by rain or car washes.
Water left on the car body and the lining of the Motorcycle Cover adhere to each other, causing friction and possibly scratching the car body with small gravel, fine dust, etc. We recommend that you remove water, dust, gravel, etc. from the car body thoroughly before using the cover.
Motorcycles that have been used in the rain before the Motorcycle Cover is applied should be wiped clean and maintained at a later date.
Avoid using BacCover during typhoons, storms, and other strong winds.
High winds can cause flipping and flapping of the Cover, which can lead to abrasions and tipping of the Motorcycle.
If you choose to install the Cover to protect your Motorcycle from non-products caused by high winds, please use it with caution and at your own risk.
Wind, including strong winds, can cause the Covers to flap, which may result in peeling of the paint film and scratches on the car body.
*We recommend that you prevent your motorcycle from tipping over in strong winds when the Motorcycle Cover is hanging.
Motorcycle Covers that have been soaked in rain will not dry quickly, so please remove the cover from the vehicle and allow it to dry completely before using.
If the ground is still damp after the rain has stopped, condensation inside the Cover may damage the painted surface and stain may occur on the Gold surface.
Also, the temperature difference between the inside and outside of the cover may cause moisture to form inside the cover, so please remove the cover periodically to evoke the moisture.
Water-repellent sprayetc. can be applied after drying to extend the life of the Cover.
*Regular maintenance of the motorcycle cover by spraying water-repellent spray is recommended.
How did it compare to other products?
The fabric is thin, so we recommend replacing it each time it is used, as it may tear due to age-related deterioration depending on the environment in which it is used.
It is low-cost, but with consideration for identification of front and rear, and keyholes in front and rear, making it convenient to install a locking device.
It is also good that the CenterBuckle belt is equipped with wind-skipping protection.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
The way to distinguish the front and back is to hang the Motorcycle Cover in front of the Blue colored One point.
The color of the keyhole on the Front is Red, so it can be distinguished here as well.
The color of the Rear keyhole is Black, so it can be distinguished here as well.
It is safe to prepare a front and rear locking device. If installed at the same time, it will reduce the RISK of flying Motorcycle Cover in the wind.
Also, by installing locking devices in the front and rear from theft prevention, the risk of being targeted is reduced by the fact that the Motorcycle cannot be seen, which takes time to steal.
Water-repellent sprays can be prepared for regular maintenance.
View detail
Genuine product
This is Honda hornet 250 total in a pipe along with outer rubber. specially used in f6 f7 series. Good quality soft material with durable rubber. Genuine products made in Japan. Recommended View detail
Genuine product
This is Honda hornet 250 left site handle rubber. This will fit perfectly tightly to the handlebar. Made with good soft rubber. Jameen product made in Japan View detail