Reviews
Fits: HONDA CBR400 R, HONDA GOLD WING, HONDA VTR1000, HONDA NC750S, HONDA NC750X, HONDA NC700X, HONDA DN-01, HONDA NC700S, HONDA VT1300CX, HONDA SHADOW400, HONDA SHADOW600, HONDA CTX700, HONDA INTEGEA, HONDA FORZA, HONDA Silver wing400, HONDA VTX1800, HONDA VTX1300, HONDA GOLD WING F6B, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF
Genuine Honda Oil Filter for CBR600RR 2021
Ok so it's just an oil filter. An oil filter that gets changed through out the bikes life. So, why bother buying really cheap aftermarket ones or the really expensive one when you know the genuine will work perfectly and give a great life span. The filter was easy to find, it also fits quite a few different models so is readily available. The price was really good, and still better than could source locally for the same Honda part. As I always have more than one part in each order, the cost of shipping is really good. I generally use EMS as it gets to me very quickly and the tracking is full, I mean FULL as in every step of the journey. I know exactly when the order will be delivered and apart from once, the delivery has always been on time. Every part in the order was well packaged as expected and the outer box was sealed on all sides so none of my smaller parts could escape.There is not really much to say about the finish of this oil filter as there is not really much you can see, The paint on the outer is really good and no runs or blemishes on it at all. The filter threaded on really easily and obviously, with any oil filter change, a small amount of oil on the end just to help seal.Fitted in no time at all and filled the oil in the engine. Runs really well and with the new oil, sounds a lot better than it did. Happy customer. Thank you Webike. View detail
For One point in the License Plate Department!
I purchased it as a one point accent for the license plate section, and as a result of installation, the license plate section looks tighter! View detail
That's what Active is all about!
I purchased ActiveSupport along with my brembo equipment. I personally like this manufacturer and the quality and price are very attractive. I am very satisfied with the center and the quality of the product. It may be a little expensive, but it is a product that you can be satisfied with once rather than losing money buying a cheap one. View detail
Easy installation
This is a HONDAOEMOption that adds a gorgeous texture to the Indicator Lamp area of the Meter.
Installation is easy
Simply degrease and clean the mounting surface, peel off the backing paper of the Body's Double-sided Tape, and affix it.
Hairline-style finishes and understated Logo bring Accent to the view from the Owner.
I feel no discomfort and wish it had been included from the beginning.
View detail
Simple but well-made License Plate Bolt
I bought it for Dress-up for One point.
The screws on the license plate are the same for all car models, so I think it will fit most large car models.
After several years of use, the color has not deteriorated and there are no bald spots.
Parenthesis has a simple structure with a slit design that is compatible with other PremiumZone products.
View detail
To dress-up the Handlebar area
I installed it on a CBR1000RR 2018 Front Brake Fluid Tank I also purchased the Rear one as well.
The gold texture is beautiful, the same shade as O-Ring's Fork.
Installation was a simple process of turning the Cap and replacing it.
I am self-satisfied, but I like the custom feeling because it is a part that is always visible.
The Sticker on the Top is pasted by myself, so I am satisfied with the Large change because of the attention to detail in being able to determine the orientation after the Cap is closed.
I guess I will have to check the color fading in the sun, but it is a reasonably priced product, so I don't think it would be a bad idea to replace it.
You may want to try a different color next time.
View detail
Yoshimura Brake Lever Guard
The brake lever guard looks sleek and material are of high quality expected from yoshimura. Sadly they don't make a clutch lever guard too. It would be great if they have it so it would look symmetrical on the bike. View detail
Fits: HONDA , HONDA CB500X, HONDA CBR500R, HONDA Rebel1100 DCT, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CBR650R, HONDA CBR400R, HONDA CB650R, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB1000R, HONDA 400X, HONDA Rebel1100 T, HONDA Rebel1100
Nice looking sticker on the tank!!
For my 2023 Honda Rebel 1100 - very simple to apply, just makes sure alcohol wipe the surface first and then line up the stick with the gas tank. You might experience some unaligned screws holes on the sticker, in that case use a heat gun gently on it then use hand move the stick to the proper positions. Overall - nice looking products but for almost $20 I think is little over price, and not sure how long it last. View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
Fits: SUZUKI Gixxer SF 250, HONDA CB1300SUPER BOLD'OR, HONDA NC750X, HONDA CB1300SUPER FOUR, HONDA CRF250RALLY, HONDA CB1300SUPER FOUR SP, HONDA CBR650R, YAMAHA MT-25, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR SP, HONDA CRF250RALLY S, SUZUKI Gixxer 150., KAWASAKI VERSYS-X 250 ABS(17) KLE250D, YAMAHA MT03, Others , SUZUKI V STROM250SX
Size is just right.
I purchased the DH-710 Seat Bag for my YZF-R25.
Size (H145×W235×D280mm) and capacity (7L) The fixed belt is universal, so I don't mind that there is quite a bit of extra space.
View detail
Cospa is nice.
O-ring for CROSS CUB (JA45) level gauge
Once a year or so, when oil stains from the threaded part of the Level gauge become noticeable, we replace it.
View detail
Fits: Others Universal, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLDOR, HONDA HAWK11, HONDA CB1100EX, HONDA CB1100RS, HONDA REBEL1100, HONDA CBR1000RR-R FIREBLADE, HONDA CB650R, HONDA CB1000R, HONDA VFR800F, HONDA CBR650R, HONDA CB1000 SUPER FOUR, HONDA CBR900RR, HONDA X11, HONDA VFR, HONDA X4, HONDA CBR1000RR, HONDA CBR600F, HONDA VRX
gargantuan
[How is it used?
I bought this because my 3 year old DAYTONA Motorcycle CoverSIMPLE LLSize (https://www.webike.net/sd/23823142/) had reached its limit. I was going to buy another DAYTONA, but it was late in coming in, I chose this one which was in stock.
Was the one you received as per Image?
It is just as shown in the Image. I think you will receive the same contents no matter which Cover you buy under 5000yen.
How was your experience with it?
I bought a 3L after checking the fit model, but it was too large for my ZX-7R.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
If it lasts 2 years, I won't say anything. The price is the price. I expect it to be durable against UV rays.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Motorcycle covers should be inexpensive, but it is a good idea to buy a new one from a well-known manufacturer in 2-3 year cycles. It doesn't matter what you use when you leave it outside.
View detail
Cost-effective dress-up
I purchased this product because I liked the simple design and more affordable pricing than other companies.
Since the mounting is hexagonal, it is difficult to tamper with by hand like the OEM, and I expect it to be somewhat tamper-proof.
The color of Gold is slightly lighter than Posh and Babyface, but once you get used to seeing it, it doesn't matter much.
The O-Ring is also included, so it can be popped in as is.
View detail
Fitted like the geniune one
For the high performance and upgrade the air flow with an afternarket exhaust system i choose this one as the best brand in this segment, fitted on my 2019 Honda CB1100RS like the genuine one and make the flow and response better, ofcourse beside the best price and trusty service from webike japan View detail
It's fine
I was able to pimp my CB1300SB 2BL−SC54. I think it is good cost performance that it can be used repeatedly. After installation, I could not feel any change in acceleration or exhaust sound. After Fire became worse when decelerating and Axel Off. I think it is because the fuel condition became thinner. I bought it on the assumption that I would ECUTuning anyway, so there was no problem, but after ECUTuning, the exhaust sound, acceleration, and blow off were considerably different. View detail
OEM equivalent in both reliability and price
[How is it used?
*Evaluated after replacement and only one run for Campaign purposes (https://www.webike.net/special/campaign/brembo_serieoro/)
Only rear. use
211 km from December 30, 2023 to January 8, 2024, from urban driving to some mountain passes (National Highway 299 Hanno - Chichibu) and highways.
Brake Disc:SUNSTAR ER-033 (https://www.webike.net/sd/24143238/)
Brake fluid:ACTIVE DOT-04 Green (https://www.webike.net/sd/20443936/)
Brake hose and others:GOODRIDGE (https://www.webike.net/tab/parts/br/268/)
Was the one you received as per Image?
The product is exactly as shown in the image.
Although there is no package image, it was packaged in a Plastic package, which is often seen in Vesrah and other products.
The Red Coating-like substance was more slippery than I had imagined.
The Red part of the product is as shown in the product image, so it is natural that the Red part was claimed as shown in the Image even when it was installed in the vehicle.
Was the installation difficult?
The shape is exactly the same as the OEM, and the shim, bracket, and installation are all easy.
Red coating is applied except for the ground surface of the Brake Disc, and I feel that the silicon grease has been extended well.
Unlike Vesrah, the back surface is not textured by coating, so I thought it was easy to clean with parts cleaner.
How was your experience with it?
*Experience Brake Pads:OEM, Vesrah VD-174JL (https://www.webike.net/sd/20460287/)
We could not perceive any difference compared to OEM or Vesrah, although we believe we also got a bite during the run.
When only Rear was intentionally applied, the speed adjustment was well done, and I did not feel any discomfort.
The product is at least not problematic to use from the above and seems to have enough performance to be used quickly and easily.
I don't think any dragging has occurred.
Circuit is rarely visited, so I think it fits the usage of this product, which claims to be a general road Main.
[Included Parts:were they on?
Translation (please type here) was included with the paper Instruction Manual, which did not include any translation at all.
Even though he could not read the Instruction Manual, he assumed that the chamfering, grease, and installation were the same as OEM because the shape is the same as OEM.
[Was there anything that disappointed you?
Not for products
The product description on Webike incorrectly stated that anti-counterfeiting was included, but this product was not covered.
https://www.brembo.com/jp/company/news/brembo-app-that-checks-if-products-are-original-or-not
[Notes]
As you can see in the product image, the brake pads are bright red and the part that can be seen from Caliper when installed is also red. They may not be recommended for those who care about the color.
Price difference from OEM
The price of this product is a little higher than that of OEM Brake Pads (5,830 yen) at the time of writing (6,380 yen). However, the price will be reversed by discount and Point reduction.
While OEM parts have a different level of reliability, this is a product of a well-known manufacturer whose name is often mentioned when people talk about "brakes," even though it is in the same price range as OEM parts. Although the color may be a little different for some people and vehicles, it has the performance to be used without discomfort after pad replacement, so it is likely to be one of the top choices when replacing consumable parts.
View detail
Fits: HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SF, HONDA CB1300SB
MORIWAKIFrame Hole Plug
Purchased for CB1300, Silver is almost unnoticeable when replaced from OEM.
If you want to make it stand out, another color is recommended.
The OEM Hole Plug has a groove on the underside.
It can be easily removed by screwing a slotted screwdriveretc. into it.
View detail
Fits: HONDA CB1100R, HONDA STEED600, HONDA MAGNA, HONDA RC30, HONDA VF750C, HONDA VFR750F, HONDA Crossrunner, HONDA VFR800F, HONDA VT250F, HONDA XELVIS, HONDA VT250Z, HONDA V-TWIN MAGNA, HONDA VT250 SPADA, HONDA VFR800X, HONDA CB1100F, HONDA CB1100SF, HONDA CBR1100XX, HONDA X-11, HONDA CTX1300, HONDA ST1300
MORIWAKIOil Filler Cap
One of these costs just under 4,000 yen.
The texture is good, so I'm satisfied.
Recommended for casual One point
View detail
I'm satisfied with the texture.
Full floating in Circuit
SemiFloating is best except for Circuit.
Wave washer- I think it would be better if the waves were just a little bit smaller.
View detail
Fits: KAWASAKI ZRX1200R, HONDA CB400SF, KAWASAKI ZRX1200S, YAMAHA XJR1300, KAWASAKI ZRX1100, KAWASAKI ZrX1200ZrX1200 DAEG, HONDA CB1300 SF, YAMAHA XJR400, YAMAHA XJR1200
Functional and dress-up
I installed it on my ZrX1200DAEG.
I bought this one to match the color of Anodized with Bar End.
The rigidity is good, and the fact that the NORMAL Wiring could be installed without modification is highly appreciated.
The handlebar is higher and closer to the front, so I feel less tired when touring. It is also easier to handle.
After two years of use, the Anodized remained clean and the Handlebar did not wobble.
View detail