Reviews
Fits: YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA Vino Molfe (VINO Molar feh), YAMAHA Vino Molfe (VINO Molar feh), YAMAHA VINO Molfe (VINO Molar feh), YAMAHA VINO Molfe (VINO Molar feh), YAMAHA VINO Molfe (VINO Molar feh), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO)
sa-26j
I installed it on a REMOTE CONTROLLERVINOsa-26j that was given to me by a friend.
The replacement time is about 60 minutes even for an amateur, including cleaning of the inside of the case.
Torque tightening is Primary 30Nm Clutch housing 40Nm.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Bright!
I bought a used VINODELUXE Valve because it was out of stock, so I looked for it and found it.
It is not made in China, which I have never heard of, and which I sometimes see on Amazon and other places. The brightness is nothing compared to the Normal valve. It is bright! It is enough for the speed range of a moped.
It may be a problem on the vehicle side, but switching from Low to High is smooth, but conversely, when changing from High to Low, I feel that it changes with a slight one-tempo13 delay.
View detail
Fits: YAMAHA XT660R/X(Reimport), YAMAHA VOX, YAMAHA VINO Molfe, YAMAHA VINO/Delux, YAMAHA VINO/Delux, YAMAHA Tricity155, YAMAHA TRICITY125, YAMAHA TMAX, YAMAHA TMAX, YAMAHA TMAX, YAMAHA TMAX530, YAMAHA TMAX530, YAMAHA MT-03 (reimported), YAMAHA MAJESTY125(Reimport), YAMAHA JOG ZR, YAMAHA JOG/Deluxe, APRILIA SCARABEO400 IE, APRILIA NA850 MANA/GT, APRILIA PEGASO650STRADA, APRILIA DORSODURO
IU22 to Grom JC92
I will put it on a Grom JC92.
Perhaps the mainstream that sells is NGK.
DENSO IriPower won in the Kernel Yonders video.
I don't know if the fireballs in the fire core will affect it, but I decided to give it a try.
DENSO's products are basically determined by the Plug diameter, length, and heat value of the Large body.
NGK is finely made by Engine.
I was wondering how this is going. I don't see any glitches in my experience.
This is not to say that it is not a cause for concern.
View detail
Fits: HONDA CUB [Cub]., HONDA CUB [Cub]., HONDA CUB90 [Cub]., HONDA GROM [grom]., SUZUKI ADDRESSV100 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI BIRDIE [Birdie]., SUZUKI Birdie 50, SUZUKI Birdie 50, YAMAHA GEAR [gear]., YAMAHA Town MATE90 [Mate]., YAMAHA News MATE [Mate]., YAMAHA News MATE80 [Mate]., YAMAHA News MATE90 [Mate]., SUZUKI DF125, HONDA APE100 [Ape].
HUNTER Grips
HUNTER Grips Excellent grips, good pattern, good value for money. Universal option for almost any moped. I take not the first time, everyone is happy! Great grips, good pattern, good value for money. Universal option for almost any moped. I take not the first time, everyone is happy! View detail
Fits: YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA VINOMolar feh, YAMAHA VINOMolar feh, YAMAHA VINOMolar feh
Failed after only 4000 km.
Purchased as a replacement for VINO (SA26J).
(The V Belt (which had been replaced at the same time as this assembly) was shattered after only 4000 km.
After replacing the V Belt at a Motorcycle shop, the car was shattered again, after only a dozen or so kilometers.
(The motorcycle shop had just changed the belt, but this time they didn't cut corners.) The clutch was also inspected.
Then, an anomaly was found in two Pulleys in ASSYRear.
V Not the surface that Belt hits.
The convex part of the Rear Pulley (SecondarySieveComplete) and the tubular part of the Front Pulley (SecondarySlideIngSieveComplete) that it is penetrating are wobbly and rickety when touched by hand.
This caused uneven rotation and the wavy V Belt seemed to break into pieces.
But to begin with, the two pulleys do not rotate separately, so the part is not even worn.
Cause unknown.
Was either Pulley a manufacturing defect with a shaky core?
Since it is an assembly, we did not disassemble it after purchase and installed it on the Motorcycle as is.
Other parts, the surfaces interfering with the shaft, are not worn.
Clutch plates are not so worn.
View detail
Fits: HONDA Dio 110, HONDA XLR BAJA, HONDA VFR400K, HONDA VFR400R-Z, KAWASAKI D-TRACKER125, KAWASAKI EPSILON 250, KAWASAKI KLX450R, YAMAHA XC50, YAMAHA XC50H, YAMAHA XC50R, YAMAHA BX50, YAMAHA BX50N, YAMAHA BX5S, YAMAHA YW50F, YAMAHA XF50L, YAMAHA BX50, YAMAHA BX50, YAMAHA BX50, YAMAHA BX50N, YAMAHA BX50N NEWS GEAR
High vibration resistance
[How is it used?
Replaced by out of valve.
How was your experience with it?
LEDs would be better, but it's not the place to put your money where your mouth is.
How did it compare to other products?
The quality will be the same as the sphere.
[Points to note]
Motorcycle's Rose Si changes Large
View detail
Fits: HONDA CUB [Cub]., HONDA CUB [Cub]., HONDA CUB90 [Cub]., HONDA GROM [grom]., SUZUKI ADDRESSV100 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI BIRDIE [Birdie]., SUZUKI Birdie 50, SUZUKI Birdie 50, YAMAHA GEAR [gear]., YAMAHA Town MATE90 [Mate]., YAMAHA News MATE [Mate]., YAMAHA News MATE80 [Mate]., YAMAHA News MATE90 [Mate]., SUZUKI DF125, HONDA APE100 [Ape].
Mini Racing Grip Hunter
Purchased for Honda Monkey. The quality of the material and workmanship is excellent. Versatile pattern, comfortable grip. On installation everything is fine. You can take. Purchased for Honda Monkey. The quality of the material and workmanship is excellent. Versatile pattern, comfortable grip. On installation everything is fine. You can take. View detail
Fits: YAMAHA XC50 Vino, YAMAHA XC50 Vino, YAMAHA XC50 Vino, YAMAHA XC50 Vino, YAMAHA XC50 Vino, YAMAHA XC50 Vino, YAMAHA XC50 Vino, YAMAHA XC50 Vino, YAMAHA XC50 Vino, YAMAHA XC50 Vino, YAMAHA XC50 Vino, YAMAHA XC50 Vino, YAMAHA XC50 Vino, YAMAHA XC50D Vino Deluxe, YAMAHA XC50D Vino Deluxe, YAMAHA XC50D Vino Deluxe, YAMAHA XC50D Vino Deluxe, YAMAHA XC50D Vino Deluxe, YAMAHA XC50D Vino Deluxe, YAMAHA XC50D Vino Deluxe
OEM
The side-view mirror had a bent shaft and when I tried to replace it, I found that the screw was stuck. I replaced the entire SwitchUpper. I knew it was OEM and installed it without any problems.
It's nice to be able to get OEM Parts on the Net.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Good cost performance for an introduction to LED Light
Installed on SUPER CUBJA10 model, selected because it is easier to install than OEM ProductHalogen bulb. The low beam is quite bright. The high beam is not so different from the low beam because the low beam is quite bright. Overall, the price is not much higher than Halogen, and it is easy for beginners to install, so I recommend it for beginners. Incidentally, when installing, the bolt just below the light should be loosened by turning it as if peeking from below. I turned it the other way and had to replace the entire light housing. (???????) View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Easily.
Easily replaced with a pon.
The color is now White, but the light intensity is not good.
View detail
Fits: YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA VINOMolar feh, YAMAHA VINOMolar feh, YAMAHA VINOMolar feh
Good product, but 2 weeks from order to arrival
The NORMAL Clutch has two pieces, but this item has three.
Be careful when you want to replace only the Clutch or Spring at a later date by reducing the ASSY.
Center spring is stronger.
So far, no problems.
However, I had to wait two weeks for delivery.
This is despite the fact that when I placed the order, the order page indicated that it would ship in 3 days.
Partner Warehouse. Into In stock." I'm just saying.
It is too late to be informed by email after the order has been accepted.
If I had been in a hurry, I would have definitely purchased elsewhere.
Even if they were waiting to be assembled, there is no way they would be so slow in communicating with FOR JAPAN MODEL.
The delay was probably due to waiting for deliveries from China, Taiwan, and other foreign countries.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
It is easy to install.
Flicker occurs during Idling as with Halogen, but Once it starts running, it stabilizes.
Since there is no control box, installation is easy. Moreover, the price is as low as High WattageHalogen.
The other thing is durability. I hope it will last a long time.
View detail
Fits: HONDA PS250, HONDA Johno., SUZUKI Sky Wave 250 (2-light type), SUZUKI Sky Wave 400 (2-light type), YAMAHA BWS, YAMAHA vino, YAMAHA Bino DX, YAMAHA Majesty (5GM), YAMAHA Majesty (5SJ), YAMAHA Majesty C (5GM), YAMAHA Majesty C (5SJ), HONDA Dio 110., HONDA dunk, HONDA Spacey 125, HONDA Super Cub 50 Pro (AA04), HONDA Super Cub 110 Pro (JA10), HONDA Super Cub 110 Pro (JA07), HONDA GROM, HONDA cross-cub, HONDA XLR250 Baja
Item(s) on par with Stanley
HondaFORZA (Si) HS1 of Headlight Bulb used for (35/35) but they would go out in about a year. So I looked for a Led bulb without depth and replaced it, but only LowBeam was usable, HighBeam was illuminating the sky, and it went out in half a year. I decided to go back to the OEM product, but I happened to find a product from KN Planning, and since it was half the price of the OEM Product, I thought I'd be fooled and buy it.
The one I received was made by Philips, a Chinese company. I thought this would be Large sturdy.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Wish it was a little brighter.
Reasonable brightness for a moped.
PlusOnHigh beam feels subtle and dark underfoot and in the distance.
Low beam light distribution was good.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Replaced here because it was dark.
The OEM was Halogen, so of course it was dark, but we replaced it with this one.
I don't have any experience on the road at night yet, but I'm hoping for the best there. (Lol)
View detail
Fits: YAMAHA BJ50, YAMAHA BW'S, YAMAHA BW'S, YAMAHA JOG remote control, YAMAHA JOG remote control, YAMAHA JOG remote control, YAMAHA Mateseries, YAMAHA AXISTREET, YAMAHA VOX, YAMAHA VINOMolar feh, YAMAHA VINO(4-StrokeXC50), YAMAHA VINO(2-StokeYJ50R), YAMAHA MAJESTY125, YAMAHA JOGAPRIO, YAMAHA JOGPOSHE, YAMAHA JOG(4-StrokeCE50), YAMAHA JOG, YAMAHA GRANDAXIS100, YAMAHA GEAR(2-StokeBA50NH, YAMAHA GEAR(4-StrokeBX50)
mild
Parenthesis is bad, but the best protection against the cold is a Handlebar Cover.
It is quite warm when used with the Grip heater.
I am glad that it is easy to install and Reasonable.
View detail
Fits: YAMAHA JOG 4st SA36J, YAMAHA JOG Zr (FI) SA39J, YAMAHA JOG Zr, YAMAHA VINO, YAMAHA VINOMolar feh, YAMAHA VINO, YAMAHA VINOMolar feh
Well-made
1.I replaced it with a ZOOMER weight roller with 2000km on it. It is also a DAYTONA Power Advance/Super High Speed Pulley Kit The weight roller is installed at the same time as the weight roller. At first, I did not know about the weight change of the weight roller, so I called DAYTONA and asked them about it. "I would recommend 5.5g×3 or 6g×3." I bought them at a nearby store because webike did not have 6g ones in stock. The point to note is that there are many variations of the weight roller, even if it is made by DAYTONA, so be sure to choose the right one for your needs. After installation, the maximum speed increased from 63 km to 69 km. View detail
JOG ZR
It came quickly. Original product, I am very satisfied. I haven't installed it yet, but I'm sure everything will be fine. Honest company, order, do not be afraid. Arrived quickly. The product is original, I am very satisfied. Haven't installed it yet, but I'm sure it will be fine. Honest company, don't hesitate to order. View detail
Fits: YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA VINOMolar feh, YAMAHA VINOMolar feh, YAMAHA VINOMolar feh
Not worth repairing.
A few days after popping it on, a noise occurs?
Rose the Clutch, Clearanceetc.Check….
I could understand the messiness of the Made in Taiwan product. The mounting plate of the three clutches is distorted. Because of the distortion, one of the clutches is not open. The thickness of the sieve is also RoseRose….
It's not Repair.
View detail
Fits: YAMAHA XT660R/X(Reimport), YAMAHA VOX, YAMAHA VINO Molfe, YAMAHA VINO/Delux, YAMAHA VINO/Delux, YAMAHA Tricity155, YAMAHA TRICITY125, YAMAHA TMAX, YAMAHA TMAX, YAMAHA TMAX, YAMAHA TMAX530, YAMAHA TMAX530, YAMAHA MT-03 (reimported), YAMAHA MAJESTY125(Reimport), YAMAHA JOG ZR, YAMAHA JOG/Deluxe, APRILIA SCARABEO400 IE, APRILIA NA850 MANA/GT, APRILIA PEGASO650STRADA, APRILIA DORSODURO
Replace it at 5000km.
With the Plug replacement of DORSODURO?750, I chose IU22 of DensoIridium plugs again this time.
It had run about 10,000km since the last exchange, and had been using it with no problem at all, but the acquaintance who rides Shiver 750 said that the engine was not good recently, and it did not turn to the high rotation, and repeated turning, and as a result of investigating the cause in various ways, the spark of Iridium plugs (IU When the spark of Iridium plugs (IU 22) which had been attached became weak, and it exchanged it with NGKPlug of the OEM specification, it is said that the symptom did not come out.
Because it had run only 5,000km after the Plug was exchanged, it is said that it did not think that it was the fault of the Plug, but when it examines, it is the Iridium plugs which tend to be thought to be long life, but with DensoIridium plugs, the life of the Plug of the model number which begins with I is not different from the general Plug. When it exceeds this distance, it is said that there is a possibility that it begins to cause loss of fire.
So the Plug of my acquaintance had simply reached the end of its life and lost its fire.
Because of such reason, there was no problem at all for the present, but I who ran more than 10,000km also suddenly became the Plug exchange.
As for the Plug replacement of DORSODURO?, since the Rear bank is obstructed by Tank, remove it completely or lift it until it becomes vertical like you.
The front bank is more troublesome, because the Radiator is completely covered by the lid.
At this time, you need to be careful not to damage the Radiator core with tools.
After the replacement, the exhaust sound is better and the pulse of the engine seems to have become crisp and energetic.
Maybe mine was also a lifetime after all.
View detail