Reviews
Fits: YAMAHA AXIS 90, YAMAHA JOG90, YAMAHA VINO(2Cycle), YAMAHA JOG (5BM1), YAMAHA JOG (5KN1|2), YAMAHA JOG EX, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA APRIO, YAMAHA APRIO, YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG Z, YAMAHA JOG Z, YAMAHA JOG Z, YAMAHA YV50 Z II, YAMAHA JOG APRIO Type 2
Fits to JOG 3KJ Thick Boss
I bought it because I wanted to have the highest speed for one more stretch.
I couldn't use the Pulley side of the NTB OEM Type, and the Torque Camshaft side wasn't coming all the way to the outside, so I went with the Long Type.
Pulley and Face are made by KITACO.
The Bose Washer is about 0.8mm Zr.
It is a thick boss, so I think it would be different if it was a thin boss, but it looks like this.
The texture was good too. It seems to have increased the maximum speed? (Not measured) . Durability is still unknown.
However, the start will be slower than OEM Type, and if you don't have an engine with some power, you won't be able to use up the maximum speed, so it is better to use it after customizing it.
We have a KN 70cc Bore up 16carburetor Yokozuna Exhaust System.
Also, the inside of the crankcase will have a rub mark, so I think it's best to have Spare as well, since it may suddenly break at any timing.
View detail
Fits: SUZUKI address, SUZUKI Address EX, SUZUKI Address V, SUZUKI Address V100, SUZUKI Address V Tuning, SUZUKI Address WAY, SUZUKI Let's II, SUZUKI Let's IIG, SUZUKI Let's IIL, SUZUKI Let's IIS, HONDA XR100 Motard, HONDA XR50, HONDA Ape., HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Super Cub 100, HONDA Super Cub 50, HONDA Super Cub 50DX, HONDA Super Cub 50STD, HONDA Super Cub 50 Business, HONDA Spacey.
The ball went out in a flash.
Within an hour of installing it and lighting it up, the inside of the Valve went black and the bulb went out shortly thereafter. I don't know if the inert gas inside was removed or not. I replaced it with a Japanese Small thread one, and it continues to light up without a problem, so I think it is an obvious product defect. View detail
Fits: YAMAHA Axis (Axis), YAMAHA Axis (Axis), YAMAHA Axis (Axis), YAMAHA Axis (Axis), YAMAHA Axis (Axis), YAMAHA BWS (BWS), YAMAHA GRAND Axis (GRAND AXIS), YAMAHA GRAND Axis (GRAND AXIS), YAMAHA GRAND Axis (GRAND AXIS), YAMAHA JOG (JOG), YAMAHA JOG 90 SPORTS EDITION (JOGSPORT EDITION), YAMAHA JOG 90 SPORTS EDITION (JOGSPORT EDITION), YAMAHA JOG aprio EX (JOG APRIO), YAMAHA JOG aprio typeII (JOG APRIO), YAMAHA JOG aprio typeII (JOG APRIO), YAMAHA JOG SPORTS EDITION (JOGSPORT EDITION), YAMAHA JOG Z-II (JOG)
Front pads
The manufacturer NTB is not worse than the original, it is well suited for replacing a consumable. Installation takes a short time. Made from quality materials. The resource of the pads is enough for about an average season or depends on the intensity of use. In bad rainy weather, they remain functional, and in hot weather they do not even work badly. -------------------------------------------------- -------- Manufacturer NTB is not worse than the original, it is well suited for replacement. Installation takes a short time. Made from high-quality materials. The player's resource is enough about an average of or depends on the intensity of use. In poor rainy weather, it is maintained, the same and not even badly triggered in hot weather. Powered by Google Translator View detail
Fits: SUZUKI OB50E, SUZUKI love, YAMAHA Axis 50, YAMAHA Axis 50, YAMAHA Axis 90, YAMAHA Excel, YAMAHA gear, YAMAHA gear, YAMAHA gear, YAMAHA champ, YAMAHA try, YAMAHA Grand Axis, YAMAHA Super Jog ZR, SUZUKI GN50E, SUZUKI RG50γ, SUZUKI TS50HUSTLER, SUZUKI ADDRESSV125, SUZUKI WOLF50, SUZUKI CARNA, SUZUKI Shot
Exhaust gasket
The set includes two pieces, they fit a non-original exhaust pipe, everything matched perfectly with the dimensions. Made from quality materials. -------------------------------------------------- -------- Includes two pieces, no original exhaust pipe approached, everything has matched with dimensions. Made from high-quality materials. Powered by Google Translator View detail
Fits: YAMAHA CYGNUS 125, YAMAHA RZ50, YAMAHA JOG SPORT 6.8PS, YAMAHA JOG SPACE INNOVATION, YAMAHA JOG Z-2, YAMAHA JOG Z 6.8PS, YAMAHA JOG EX 7PS, YAMAHA AG200, YAMAHA TY175, YAMAHA RS90Target, YAMAHA SR125, YAMAHA SR125B, YAMAHA GEAR, YAMAHA SUPER JOG Zr, YAMAHA JOG SPACE INNOVATION, YAMAHA JOG ZS 7PS, YAMAHA JOG Z 7PS, YAMAHA JOG, YAMAHA JOG APRIO EX, YAMAHA JOGTrunk 7PS
Stable DAYTONAShoe
[How is it used?
I installed it on the VINO125 of Taiwan YAMAHA.
Was the one you received as per Image?
The fitment was not written, but I followed it from other models and chose this one.
Was the installation difficult?
Bingo on the installation!
It came on without a problem.
How was your experience with it?
The Shoe area was taken more firmly than the one made by NTB, and the effect was improved.
[Was there anything that disappointed you?
It is Blue, but it becomes invisible.
Good Rider is the one who pays attention to the invisible places.
View detail
Fits: YAMAHA Business V80, APRILIA SR50, DUCATI 600TL, HONDA DJ1RR, HONDA TACT-BASIC, HONDA Dio., HONDA Dio SP, HONDA Lead 50, PGO Roadshow 50, SUZUKI Address 110, SUZUKI Address V100, SUZUKI street magic, SUZUKI Street Magic II, SUZUKI super-molle, SUZUKI sepia, SUZUKI morae, YAMAHA BJ, YAMAHA Axis 50, YAMAHA Axis 90, YAMAHA Axis Profit 90
Good candle
An excellent high-quality spark plug, was bought for Suzuki ZZ, I decided to take a bigger glow number, for operation in the heat and at higher speeds, there were no problems for the whole time, the candle proved to be excellent ------------ ---------------------------------------------- Excellent quality spark plug , was bought for Suzuki ZZ, decided to take a little more heat rating for operation in hot weather and at higher speeds, no problems have arisen for all time, the candle has proved itself perfectly Powered by Google Translator View detail
Fits: YAMAHA RZ250, SUZUKI COLLEDA 50, SUZUKI WOLF50, SUZUKI GEMMA 50, SUZUKI BIRDIE DX, SUZUKI VERDE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI STREETMAGIC II, SUZUKI SEPIA, SUZUKI RG50, SUZUKI MOLLET, SUZUKI LETS2 , SUZUKI K90SUPER, SUZUKI K50, SUZUKI HI R, SUZUKI GS50, SUZUKI ADDRESSV100 , YAMAHA NewsMATE , YAMAHA MATE90
A little brighter.
It is certainly brighter than the Normal valve. A little cheaper would be nice. View detail
Fits: YAMAHA BWS(BWS), YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 90, YAMAHA GRAND AXIS, YAMAHA GRAND AXIS, YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle)
It's usually good.
The carburetor itself does not have enough room for adjustment, and I wanted more adjustment on the Jet needle side too! View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125, HONDA NS50F
Great light! But it's expensive.
CUB's OEM Headlight was crazy dark and my eyesight was deteriorating and I was worried about driving at night, so I installed this one.
The headlight lens was also changed to Multi-reflector, so I was worried about the optical axis, but there was no problem.
I really wanted to use White color, but Valve seems to be blue, so I thought that the whole Headlight is too young to be blue. [Color] I chose Clear and it was the right choice. I thought about using LED but I didn't want it to flicker;
I am satisfied with the product, but the price is too high for the consumables.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
I'm doing my job reasonably well.
Products used in TLRs modified from 6V to 12VSpec.
I don't see any changes compared to the OEMs, or rather, I don't know, since they don't run nearly as much at night.
There is no hindrance in its use. The fact that it does not have any problems means it is a good product.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
I'm doing my job reasonably well.
Products used in TLRs modified from 6V to 12VSpec.
I don't see any changes compared to the OEMs, or rather, I don't know, since they don't run nearly as much at night.
There is no hindrance in its use. The fact that it does not have any problems means it is a good product.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Conversion to 12 V
I used it when I converted my CB50S to 12V.
It's bright enough to be used as a normal headlight with no problems.
The Regulator failed and the voltage was so high that it went out immediately, but under normal circumstances it would have worked fine.
View detail
Fits: その他 , YAMAHA Grand Axis 100, YAMAHA gear, YAMAHA Axis 90, YAMAHA Axis 50, YAMAHA VINO, YAMAHA TZR50, YAMAHA TZR50 R, YAMAHA TZM50R, YAMAHA JOG Aprio EX, YAMAHA RZ50, YAMAHA JOG Aprio 2, YAMAHA JOG Aprio, YAMAHA JOG90, YAMAHA JOG Sports, YAMAHA JOG Z2, YAMAHA JOG ZR, YAMAHA JOG Z, YAMAHA JOG EX, YAMAHA JOG C
Note the caliber
Purchased to prevent direct absorption of rain and snow
In GYROx, the direction of travel is reversed
maybe making a board between carburetor and air cleaner would be even better?
(When Cover is removed.)
Also, I put them on in the middle of the GYROx, but the caliber is different (carburetor is 28?)
You need a Joint Hoseetc. to convert the caliber
I could have used Joint's Hose, which can be converted from 35? to 28?
i wanted to squeeze the suction down to the carburetor, so I used a PVC pipe with a diameter conversion to make it 28?
I put it on with a 28?Joint's Hose
View detail
Fits: SUZUKI ADDRESS110, PGO Roadshow 50, SUZUKI LT80, HYOSUNG EZ100M, PGO PMX110 SPORT, PGO PMX50 SPORT, HONDA DIOSP, HONDA LEAD50, HONDA TACT BASIC, HONDA DIO, HONDA DJ1RR, DUCATI 750SS, HARLEY-DAVIDSON XL1000Series, DUCATI 600TL, DUCATI 400SS, DUCATI 350XL, DUCATI 400F3, DUCATI 350SL, DERBI HUNTER, DUCATI 300F3
Standard Plug I'd like to say "Version up from BP5HA", but &hellip ;
ADDRESS V100 Specification Plug BPR7HS But I'm excited about this BPR7HIX Purchase
I removed the plug in use BR8HSA (Honda and DIO type plug) was mounted, and my eyes were dazzled (And "New Plug (e.g. "I'll be back")
The Plug that was installed "Unspecified Plug Maybe it's because it was "Transmission Acceleration "Hill climbing I'm gonna need a good start "Idling stable I was able to experience the
(This is The only thing that came back was inferior performance due to the installation of an unspecified plug (Maybe.)
It's better than before, so it's a good thing, but it's a bit of a blur
(a) The fate of buying a used car from someone else (I know it's a good idea, but …)
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB600F, HONDA CB750F, HONDA CBR1000F, HONDA CBR1100XX Super Blackbird, HONDA CBR250R (2011-), HONDA CBR250R (MC17/19), HONDA CBR250R (MC17/19), HONDA CBR400R, HONDA CBR400R, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
I like the look of Stainless Steel
I replaced a 2006 K7 OEM BreederValve with a fluid blotch in the OEM BreederValve
It is made of stainless steel and looks great
I don't know if seal tape is necessary, but just in case
View detail
Fits: YAMAHA RZ250, SUZUKI COLLEDA 50, SUZUKI WOLF50, SUZUKI GEMMA 50, SUZUKI BIRDIE DX, SUZUKI VERDE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI STREETMAGIC II, SUZUKI SEPIA, SUZUKI RG50, SUZUKI MOLLET, SUZUKI LETS2 , SUZUKI K90SUPER, SUZUKI K50, SUZUKI HI R, SUZUKI GS50, SUZUKI ADDRESSV100 , YAMAHA NewsMATE , YAMAHA MATE90
It's brighter than the OEM!
The original Valve on the AXIS 90 was too dark and very dangerous to drive at night
I was looking for a Valve that would brighten things up a bit, and this is what I found
It definitely makes it brighter I can now drive safely at night
View detail
Fits: YAMAHA Axis 90, YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog 90, YAMAHA Axis 50, YAMAHA Apprio, YAMAHA Apprio, YAMAHA Jog Z, YAMAHA Jog Z, YAMAHA JOG (5KN1|2), YAMAHA JOG (5BM1), YAMAHA Vino (2-stroke), YAMAHA Super Jog Z, YAMAHA jogpochet, YAMAHA jog sports, YAMAHA Jog Aprio Type 2, YAMAHA Jog ZII
Recommended for people who want to have a bit of extension at high speed
Long type is used for SA16J Second Type Model
The start is a little more mild compared to the OEM, but with the combination of high prep and external CDI, it is a high speed car In my case, it was about 5km/h faster than the OEM Belt under the same conditions In my case, I improved about 5km/h under the same conditions compared to the OEM Belt
It has been two years and 5,000 km since purchase, but no cracks, etc., deterioration has not occurred
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB600F, HONDA CB750F, HONDA CBR1000F, HONDA CBR1100XX Super Blackbird, HONDA CBR250R (2011-), HONDA CBR250R (MC17/19), HONDA CBR250R (MC17/19), HONDA CBR400R, HONDA CBR400R, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
Hobby Party
No functional problems
It's a hobby to change from OEM as it's not used very often
The front brake is compatible
I installed it on a non-compliant rear brake for a test run, but the Fluid leaked
The OEM has one hole on the Caliper side and this Parts has two
The holes for air venting are also large
Installation is easy because it is only replaceable, and the Cap is attached to the OEMParts as it is It is available
View detail
Fits: YAMAHA Apprio, YAMAHA Apprio, YAMAHA Apprio, YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA jogpochet, YAMAHA Jog ZII, YAMAHA Vino (2-stroke), YAMAHA Super Jog Z, YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog Aprio Type 2, YAMAHA jog sports, YAMAHA Super Jog ZR, YAMAHA BJ
I like the look and the fact that it comes with AdjusterWrench
I bought it because my NORMAL rear shock was gone 。 First of all, looks and price 。 Easy to install
With AdjusterWrench 。 I'm working on rear shock 。 Rear does not bounce
When attacking the pass, you'll find it totally different than last time 。
View detail
Fits: SUZUKI OB50E, SUZUKI love, YAMAHA Axis 50, YAMAHA Axis 50, YAMAHA Axis 90, YAMAHA Excel, YAMAHA gear, YAMAHA gear, YAMAHA gear, YAMAHA champ, YAMAHA try, YAMAHA Grand Axis, YAMAHA Super Jog ZR, SUZUKI GN50E, SUZUKI RG50γ, SUZUKI TS50HUSTLER, SUZUKI ADDRESSV125, SUZUKI WOLF50, SUZUKI CARNA, SUZUKI Shot
exhausting and wasteful
Gasket into Manifold, but obviously the thickness is not enough to prevent exhaust leaks.. With a bad feeling, I installed the gasket and started the engine, but as I expected, there was an exhaust leak I had no choice but to use the OEM gasket and start the engine again I've purchased KN Planning's products several times and was rather relieved, but this Gasket was the worst View detail