Reviews
OEM Equivalent Product, cheaper than OEM
Used for LITTLE CUB.
The low beam ran out, and a short time later the high beam also ran out. I bought this one because it was an emergency situation and it was immediately available in stock. The standard is 25-1. The Pine Stripe part number is 1P2015.
The grade of the bulbs is also the same as the OEM, White Hot bulbs, not Halogen.
I also found HalogenType, but the price difference was about three times as much, so I decided to go with the cheaper version.
Replacement is Light rim bottom, Quantity:Pair (for Left and Right) Remove the screw on the Plus of the light rim and lift the light rim upward to remove it.
The Glass part is replaced while touching as little as possible. Time required:2 minutes.
It lit up with no problem. I am relieved. I don't know about the durability yet, but it is a long-established domestic product and I am sure there will be no problem.
View detail
DAYTONA Addressv100 Headlight Bulb
Replaced OEMHeadlight Bulb in Addressv100. Brightness is only a little brighter than OEM, but I am very satisfied. View detail
It is a great Kit for the high price. I can recommend it.
The finish is very beautiful as it is very expensive, and even though I assembled it without BALI and rode it without careful breaking in, it didn't seize up.
The clearance of Cylinder and Piston is no problem at all, but it might be better for your mental health to at least brush the corners of the Piston with Paper. The supplied clips are easily deformed and are very difficult to assemble.
Oil is separated by 3kjPump before regulation. The oil is still in the same condition as it was before the regulation.
View detail
harmony
Not OEM, but external product stopped gal oil leakage. View detail
ngk bpr7hs
I bought these ngk candles, I haven't installed them yet, but I will definitely install them next season, they look nice and good, I think they will last me a long time!
-------------------------------------------------- -------- I bought these NGK candles, I have not installed them yet, but I will definitely install them in the next season, they look beautiful and good, I think they will serve me for a long time! Powered by Google Translator
View detail
Used on a 50cc 2Cycle moped. Quite bright!
I originally used M&H Mats Stripe Halogen bulb 12V35/30W Clear, which was brighter than OEM, but still old mopeds are still dark.
Since I use them for commuting, I decided to use LEDs for safety reasons.
Installation can be done simply by removing the headlight cowl.
The color is a beautiful White and the brightness feels 1.3 to 1.5 times brighter.
The white color is more like a recent vehicle than the yellow color, which makes it a better parenthesis.
I think it is a good cosmetic product because it is inexpensive and made by Mats Stripe, which is a reliable company!
I use it on my AF35LIVE DIOZX, but the Valve is PH7 because I replaced the Headlight with an external one.
View detail
Normal Plug
It is a normal Plug. Even on a moped, changing the plug changes the fee ring quite a bit, so I think it's a good idea to change it periodically. View detail
scratch
Carbon paint peeling
without Logo
Are you inspecting?
View detail
No doubt, NGKPlug!
No doubt, I will buy Repeat. View detail
It is cheap and good
Used for SUPER CUB 50Custom.
I bought this for a fine, nondescript Grip. I think it is good for the price, with no smell and moderate elasticity.
The length is just right and the hole Size is appropriate and fine.
It is a mistake to ask for the same level of durability as OEM, but if it gets worn out, feel free to replace it because it is a cheap product.
View detail
It's brighter than a white-hot bulb.
Installed on a Honda NSR80.
The NORMALWhite heat bulbs in the NSR80 were very dark, so we replaced them with LED bulbs to make nighttime driving somewhat safer.
If anything, it is not for the purpose of illuminating the road surface, I'm here, Appeal." I think it is highly satisfactory if you consider that LEDs for
In NSR80, the heat sink part of the Light case and LED Lamp is the contact limit. There is no problem.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Product # 1P2004
One of my friends has a rare YAMAHA Town Mate 6 volt motorcycle. He was faced with the problem of finding incandescent headlamps. We are very lucky that this product is available in the webike. The workmanship is good. Great price. View detail
Fits: YAMAHA Apprio, YAMAHA Apprio, YAMAHA Apprio, YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA jogpochet, YAMAHA Jog ZII, YAMAHA Vino (2-stroke), YAMAHA Super Jog Z, YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog Aprio Type 2, YAMAHA jog sports, YAMAHA Super Jog ZR, YAMAHA BJ
Spring in Blue is Sporty
JOG APRIO (SA11J) Attached to
(At the same time, Front shock was overhauled.)
Rear tires touch the road surface depending on the parking location.
Main stand became somewhat unstable.
It was slightly up on the buttocks, but I didn't feel any negatives at all.
NORMAL ratio, the ride quality has been restored to a level comparable to that of NORMAL.
GOOD to be able to adjust Pre-road in steps.
I weigh 56kg and JUST in the weakest position.
Large box in the rear for camping touring with a lot of luggage.
The adjustment comes into play. (with adjustment tool)
View detail
Fits: YAMAHA BJ, YAMAHA Axis 50, YAMAHA gear, YAMAHA gear, YAMAHA gear, YAMAHA gear, YAMAHA gear, YAMAHA gear, YAMAHA Grand Axis, YAMAHA Grand Axis, YAMAHA Grand Axis, YAMAHA Jog Z, YAMAHA Jog Z, YAMAHA Jog Z, YAMAHA Jog ZR, YAMAHA Jog ZR, YAMAHA Jog Aprio Type 2, YAMAHA jog sports, YAMAHA AXIS 90, YAMAHA BWS100(BWS)
KITACO SUPER PERFORMANCE TORQUE
About quality and texture: Good built About the feeling of use: Satisfied setup Products to buy together: I bought with rear absorber Difficulty of installation: Easy during maintenance Cost performance and comparison with other products: Pickup increase and reliable About shipping and packaging: Fast shipment and packed proper Any concerns, cautions, or advice when purchasing: Get the cvt or belting set View detail
Fits: SUZUKI GEMMA 125, SUZUKI TS200R, SUZUKI TS125, SUZUKI DF200E, SUZUKI GS125E, SUZUKI STREET MAGIC 110, SUZUKI TS50 HUSTLER, SUZUKI STREET MAGICS, SUZUKI STREET MAGIC, KAWASAKI Z250FT, KAWASAKI KL250R, KAWASAKI KLR250, KAWASAKI KMX200, KAWASAKI Z200, HONDA XRBAJA, KAWASAKI KMX125, HONDA REBEL, HONDA XL250R, HONDA XLR250R, HONDA FTR250
Careful with Size, but if it fits, it's easy!
Used for TW200E
The previous Owner has been playing around with things, so the Headlight is unknown what the OEM one is, but it fits the Limit and was very easy to install.
The head seems to be 20mm longer than the OEM Product, so size confirmation is essential.
View detail
Fits: HONDA SUPER CUB 90, HONDA SUPER CUB 50, SUZUKI Birdie90, SUZUKI Birdie80, SUZUKI K80, SUZUKI K50, YAMAHA MATE NEWS80, YAMAHA BWS, YAMAHA MATE NEWS 50, YAMAHA TOWN MATE80, YAMAHA CHAMP CX, YAMAHA JOG POCHEtt, YAMAHA MATE, YAMAHA GEAR C, YAMAHA AXIS 90, YAMAHA Axis Treat, YAMAHA YSR50, YAMAHA YSR80, YAMAHA VOX, YAMAHA YB50
It's solid.
It repels water well and functions as a cover well enough. View detail
Fits: HONDA Forza300, HONDA CB500X, HONDA CBR500R, KTM RC390, KTM RC125, KTM RC250, KTM 690DUKE R, KTM 390DUKE, KTM 690DUKE, KTM 250DUKE, KTM 200DUKE, KTM 1290 SUPER DUKE R, KTM 125DUKE, KTM 1190 RC8, TRIUMPH Thruxton, TRIUMPH TIGER SPORT, TRIUMPH STREET TRIPLE R, TRIUMPH StreetTwin, TRIUMPH STREET TRIPLE 85, HONDA SHADOW SLASHER
Pretty good
Purchased to make effective use of the GIVI box, I installed it on the UniversalBase plate of Mono-lock and used it!
It can hold even small Rear Sets like Z250 very well.
I am also satisfied with the hold of the attached Belt.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Anyway, it's bright.
Used for GYRO CANOPY (TA03).
CANOPY is bright anyway, partly because it is a two-light system.
Light distribution is not bad.
Now we are hoping for durability.
View detail
Fits: YAMAHA ZR EVOLUTIONZII, YAMAHA ZR EVOLUTIONZII, YAMAHA ZR EVOLUTION, YAMAHA ZR EVOLUTION, YAMAHA Vino (VINO), YAMAHA JOG Z-II (JOG), YAMAHA JOG REMOTE CONTROL SYSTEM (JOG), YAMAHA JOG Poche (JOG POCHE), YAMAHA JOG Poche (JOG POCHE), YAMAHA JOG Poche (JOG POCHE), YAMAHA JOG Poche (JOG POCHE), YAMAHA JOG COOLSTYLE (JOG cool style), YAMAHA JOG COOLSTYLE (JOG cool style), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA JOG (JOG), YAMAHA GEAR C (GEAR), YAMAHA GEAR (GEAR), YAMAHA GEAR (GEAR)
Quality OEM exhaust gasket
Fits: YAMAHA RZ250, SUZUKI COLLEDA 50, SUZUKI WOLF50, SUZUKI GEMMA 50, SUZUKI BIRDIE DX, SUZUKI VERDE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI STREETMAGIC II, SUZUKI SEPIA, SUZUKI RG50, SUZUKI MOLLET, SUZUKI LETS2 , SUZUKI K90SUPER, SUZUKI K50, SUZUKI HI R, SUZUKI GS50, SUZUKI ADDRESSV100 , YAMAHA NewsMATE , YAMAHA MATE90
Didn't Fit
I couldn't use this in my 1998 YB-1. The design of the bulb doesn't lock into the bulb holder. Shame because it could do with a better headlight. View detail