Reviews
Fits: KAWASAKI ZRX1200 ZR A7F, KAWASAKI ZRX1200 ZR A8F, KAWASAKI ZRX1200 ZR A8FA, HONDA CB400SB ABSSpec. Model:EBL-NC42, HONDA CB400SB, HONDA CB400SF ABSSpec. Model:EBL-NC42, HONDA CB400SF, HONDA CREA SCOOPY Model:JBH-AF55, HONDA CREA SCOOPY i Model:BA-AF55, HONDA DIO4st CESTA Model:JBH-AF68, HONDA DIO4st, HONDA FORESIGHT, HONDA GYRO X Model:JBH-TD02, HONDA GYROCANOPY Model:JBH-TA03, HONDA HORNET250, HONDA LEAD100 Model:EBJ-JF19, HONDA MAGNA50, HONDA PS250, HONDA SHADOW400 Model:BC-NC34, HONDA SPACY125
It was cheap.
Anyway, I thought that the price was so low for a Stanley product, which I trust more than foreign-made products, even after I ordered it, but when it came in, I was surprised to see the price and quantity!
I installed the Meter Bulbs because I thought that if one bulb went bad, the other bulbs would also go bad, but two of the bulbs are replaceable!
The bulb packs are also easy to remove and store.
View detail
Product # 25602
This time we needed grips for the "Suzuki Birdie". Once again, the grips from "Hunter" did not disappoint. Everything fits perfectly, the workmanship and material are top notch as always. I am very glad! View detail
I wanted Cap.
I purchased this product to connect to the Ignition coil in Mukawa and wanted to unify the colors.
Cutter off the adhesive bonding the Cap to the cord, peel off the Cable outer skin of the Mukawa Ignition coil, insert it, and fix it with adhesive, and you are done.
The excess Cable of the product in question is used in place of the Cable attached to the OEMCoil.
This would have been unnecessary if caps in a variety of colors were available, but they are not.
Even if only the cable is replaced, the idling is stabilized and the long-used OEM product is refreshed.
View detail
Power cable & elect. module Dev'moto
Bonjour from France Thanks you for quick shipment of my order , i fixed it on ma yam sr 125 in addition of a new electronic module Dev'moto(made in France) with an iriduin plug already than replace the TCI -dead-:( the result is more better ( already too with the new module) cold cranking + little better torque at low rpm, and more i could reduce my idle setting ... so very happy with my purchase ... voilà ! View detail
Headlight LED
Installation was easy. It was brighter than I expected. View detail
Fits: KAWASAKI ZRX1200 ZR A7F, KAWASAKI ZRX1200 ZR A8F, KAWASAKI ZRX1200 ZR A8FA, HONDA CB400SB ABSSpec. Model:EBL-NC42, HONDA CB400SB, HONDA CB400SF ABSSpec. Model:EBL-NC42, HONDA CB400SF, HONDA CREA SCOOPY Model:JBH-AF55, HONDA CREA SCOOPY i Model:BA-AF55, HONDA DIO4st CESTA Model:JBH-AF68, HONDA DIO4st, HONDA FORESIGHT, HONDA GYRO X Model:JBH-TD02, HONDA GYROCANOPY Model:JBH-TA03, HONDA HORNET250, HONDA LEAD100 Model:EBJ-JF19, HONDA MAGNA50, HONDA PS250, HONDA SHADOW400 Model:BC-NC34, HONDA SPACY125
Reliability Large Stanley
Replacement of Meter lighting and Pilot bulb for VTR1000F.
The VTR was under total disassembly and was replaced.
I thought about OEM Product, but the price is too expensive for 9 pieces!
Quantities at Reliable Stanley:I bought 1 Set of 10pcs. because it was cheap! 。 No complaints and peace of mind.
View detail
OEM Equivalent Product, cheaper than OEM
Used for LITTLE CUB.
The low beam ran out, and a short time later the high beam also ran out. I bought this one because it was an emergency situation and it was immediately available in stock. The standard is 25-1. The Pine Stripe part number is 1P2015.
The grade of the bulbs is also the same as the OEM, White Hot bulbs, not Halogen.
I also found HalogenType, but the price difference was about three times as much, so I decided to go with the cheaper version.
Replacement is Light rim bottom, Quantity:Pair (for Left and Right) Remove the screw on the Plus of the light rim and lift the light rim upward to remove it.
The Glass part is replaced while touching as little as possible. Time required:2 minutes.
It lit up with no problem. I am relieved. I don't know about the durability yet, but it is a long-established domestic product and I am sure there will be no problem.
View detail
Fits: Others , YAMAHA YB50, YAMAHA YB-1, YAMAHA TW225E, YAMAHA MATE90 T90D BC-UB02J, YAMAHA JOG Poche BB-SA08J, YAMAHA GRANDAXIS , YAMAHA GEAR N JBH-UA06J, SUZUKI DR-Z400 SM BC-SK44A, SUZUKI DR-Z400 S BC-SK43A, HONDA XR50 MOTARD, HONDA XR100MOTARD
This is my first product and I am satisfied.
This is my first purchase and I am satisfied with the low price.
If it lasts about 5 years, I will be Large satisfied.
View detail
good choice
I bought it after seeing a review that you often replace it with a set with Takegawa reinforced coil. I bought any color because it was hidden in a cowl, and I connected the ngk power cable with the Takegawa reinforced coil and installed it. I had to cut the length and install it, but I thought there would be some loss, so I just connected it. It starts up well and I think it's effective in output. Thank you. View detail
great greap
I liked these grips, they look like factory ones, they were delivered in 2 weeks, I’m very happy with the purchase, I will recommend them to friends ------------------------------ ---------------------------- I liked the vulture data, they looked like factory ones, delivered in 2 weeks, I am very pleased with the purchase, I will advise my friends Powered by Google Translator View detail
Mini greap hunter
very good grips, similar to the factory ones, very soft, comfortable to hold, I really liked it, I will recommend it to my friends View detail
Used on a 50cc 2Cycle moped. Quite bright!
I originally used M&H Mats Stripe Halogen bulb 12V35/30W Clear, which was brighter than OEM, but still old mopeds are still dark.
Since I use them for commuting, I decided to use LEDs for safety reasons.
Installation can be done simply by removing the headlight cowl.
The color is a beautiful White and the brightness feels 1.3 to 1.5 times brighter.
The white color is more like a recent vehicle than the yellow color, which makes it a better parenthesis.
I think it is a good cosmetic product because it is inexpensive and made by Mats Stripe, which is a reliable company!
I use it on my AF35LIVE DIOZX, but the Valve is PH7 because I replaced the Headlight with an external one.
View detail
Normal Plug
It is a normal Plug. Even on a moped, changing the plug changes the fee ring quite a bit, so I think it's a good idea to change it periodically. View detail
Performance is top notch!
The Engine is good and spurts out perfectly.
But 3 times more than the price of Normal plug!
Cost performance is the lowest!
The average score between the two would be about 3 points!
View detail
affordable price for good quality product
these item is very useful for those who want to get perfect spark for the bike - the Cables are designed for the serious racing enthusiast and feature high temperature silicone outer jackets, solid copper wire strand core and high temperature resistor covers, leading to improved engine performance View detail
No doubt, NGKPlug!
No doubt, I will buy Repeat. View detail
Fits: HONDA Benry 50S, HONDA CB125, TRIUMPH SPRINT ST, HONDA ZOOMER(Ruckus), APRILIA SR125 (APRILIA), APRILIA SR 50, HONDA BENRY CD50, HONDA CD70 (Benly), HONDA Benly CD90, HONDA Hunter Cub CT110, HONDA EV-Neo, HONDA GROM, HONDA Dio (4-stroke), HONDA Via., HONDA broadcloth, HONDA Lead 110 (EX), HONDA Lead 50, KAWASAKI AR50/S, KAWASAKI Z125 Pro, KTM 1190 RC8
For SUPER CUB
I had been using a Cover that I had purchased at Home center, but it was torn, so I decided to go with the fireproof Type anyway.
I have retrofitted the CUB with a Front Shield and it just fits without any problems.
The rest is expected to be durable
View detail
It's brighter than a white-hot bulb.
Installed on a Honda NSR80.
The NORMALWhite heat bulbs in the NSR80 were very dark, so we replaced them with LED bulbs to make nighttime driving somewhat safer.
If anything, it is not for the purpose of illuminating the road surface, I'm here, Appeal." I think it is highly satisfactory if you consider that LEDs for
In NSR80, the heat sink part of the Light case and LED Lamp is the contact limit. There is no problem.
View detail
Fits: GASGAS TX RANDONNE, HONDA 125T MASTER CUSTOM, HONDA 250T MASTER/LA CUSTOM, HONDA APE/DX(FI), HONDA APE/SPECIAL/DX, HONDA APE100/DX, HONDA ATC70(TRIKE), HONDA BENLY (CD50), HONDA BENLY (CD50S/SP), HONDA BENLY (CL50), HONDA BENLY CD125T, HONDA BENLY CD125T, HONDA BENLY CD90S, HONDA BENLY CD90, HONDA BENLY CD90, HONDA BENLY(CD70K), HONDA CB125T, HONDA CB50S, HONDA CD250u, HONDA CHALY(CF50)
This alone did not cure the stall.
At first this cured the stall, but it was not the only thing that cured the stall... I put 10% of SurLuster UltraCleaning's purple stuff in the hard for race oil (about 1800 yen), filled it up to half Gauge, and cleaned the air cleaner as well, I have no idea what effect IUF22 has on me now. I am not sure about the effect of IUF22 at this moment, but I guess I will understand it as I upgrade my car from now on. View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Product # 1P2004
One of my friends has a rare YAMAHA Town Mate 6 volt motorcycle. He was faced with the problem of finding incandescent headlamps. We are very lucky that this product is available in the webike. The workmanship is good. Great price. View detail