Reviews
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, KAWASAKI W400, KAWASAKI W650, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS, KAWASAKI ZR-7, KAWASAKI ZR-7S, KAWASAKI ZX-10R, KAWASAKI ZX-7R, KAWASAKI ZX-7RR, SUZUKI BANDIT650, SUZUKI DL1000 V-Strom, SUZUKI GSR600, SUZUKI GSR750, SUZUKI RG400 γ, SUZUKI SV1000, SUZUKI SV1000S, SUZUKI SV650, SUZUKI SV650S
I used it for STREET TRIPLE!
I used it for STREET TRIPLE. I changed Final to Short and swung it to acceleration a little. The maximum speed fell, but I am patient. View detail
Fits: HONDA CRF250RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CBR250R, HONDA CB250R, HONDA AX-1, HONDA XR250, HONDA XR250 BAJA, HONDA DEGREE, HONDA CB300R, HONDA XR250Motard, HONDA CB300R, HONDA XR250Motard
Worth the exchange.
It's easier to handle at lower speeds.
The NORMAL pickup quality is appealing, but I think it's worth a try and see.
Acceleration and torque-feeling on launch are not bad.
Durability and cost performance are three as I have only driven about 200km since I replaced it, but from the product's claims, it looks promising.
View detail
Fits: HONDA CB900F, HONDA CB1300ST, HONDA CB750F INTEGRA, HONDA CB750F, HONDA CB1300SF, HONDA CB1100R, HONDA CB1300SB, HONDA CB1100F, HONDA CB1100, HONDA VFR800, HONDA VFR750F, HONDA CBR1100XX, HONDA CBR1000F, HONDA CB750K, HONDA VF750F, HONDA VF1000R, HONDA VF1000F Intercepter, HONDA CBX750F, HONDA VF1000F, HONDA X4
The sound becomes Large compared to NORMAL.
This time, I exchanged it with Chain.
I've chosen SUNSTAR for peace of mind. 。 Compared with the NORMAL one, the thickness of the Slim one is very thin, and the difference between the thickness of the NORMAL one and the Slim one is big. I was worried and asked my friend about it, but he told me that the NORMAL's sprocket is sanded with resin so that the sound of the drive chain becomes small while driving. That's noise control! After the replacement, the sound of the Chain became loud because there was no soundproofing effect. 。 It's not enough to bother me, so it's not a problem. 。 I don't know about the durability yet as it's still in use.
View detail
Installation abandoned …
The product is fine.
Accuracy and usability are impressive, as expected of a domestic product.
However, it is not compatible with the YamahaRacing kit Sprocket.
Note that the Racing kit and OEM parts have different nut configurations and locking systems.
Naturally, you need to make a unified arrangement with Racing kit or OEM Parts.
I didn't realize the above until during the installation process …I didn't have a choice because of my lack of research.
View detail
Fits: KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200S, KAWASAKI ZRX1100II, KAWASAKI GPZ1100
Reliable SUNSTAR and convenient selection
On the 5-speed Mission ZrX1100, for the purpose of controlling the engine speed at cruising, for a long time the 18T (45T for Driven) was installed. However, the 18T had a problem with the stability at the start and at very low speeds, so I switched back to the 17T with the same number of hinges as the OEM.
The result of turning back the Ding Ding number is just as I aimed for, and it came to accelerate a little but agilely at the time of the start and very low speed.
By the way, the chain size is 530⇒520Conversion, so it needs to be MADE IN SUNSTAR, not OEM.
We have been using SUNSTAR's Sprocket many times, and as long as we give it the proper maintenance, we have no worries about its quality and durability.
In addition, it is very convenient and very reliable that you have a lineup for the 520 conversion. I hope that you will continue to meet the demand for the Petit old car, rare car, and conversion car without reducing the size of the lineups in the future.
View detail
And then I'll trade for it
I replaced it while I was working on the Rear Sprocket.
It's hard to evaluate anything because it's not a dramatic change in Parts, but it's a well-known manufacturer, so it's safe to use.
View detail
Fits: KAWASAKI Z900, KAWASAKI Z1-R II, KAWASAKI Z1-R, KAWASAKI Z1000Mk.II, KAWASAKI Z1000H, KAWASAKI Z1000, KAWASAKI 900Super Four, KAWASAKI 750RS, KAWASAKI Z750FOUR
I feel safe
Used with the 530. the near-normal outside diameter is between 16T and 17T.
I used the company's 17T before, but because there was no hole to attach the Bolt for loosening, I repurchased the latest one. Now, I don't have to worry about the Nut getting loose.
The Package includes "Forged" Seal!
View detail
Fits: KAWASAKI Z1000R, KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z1000J, KAWASAKI Z1100 GP, KAWASAKI Z1100 R, KAWASAKI Z1100 GP
God Manufacturer
This is a must when changing the wheels of the J-Series. You can use the ERVSeries chain when you change to 520.
Sunstar, you are a god for releasing such a part for a relatively minor car model.
The drivetrain is a rule for me to make the drivetrain as 520 as possible with SUNSTAR front and rear.
View detail
Fits: YAMAHA YZ250, YAMAHA WR250, KAWASAKI SUPER SHERPA, KAWASAKI KX250, KAWASAKI KLX250R, KAWASAKI KLX250 SR, KAWASAKI KLX250 ES, KAWASAKI KLX250, KAWASAKI KDX250SR, KAWASAKI KDX250R, KAWASAKI D-TRACKER250
Trust Brand
I purchased for KLX250 which is used widely from the usual commuting to touring and circuit driving.
I think the Size was the same as the OEM, etc. (Confirmation required)
The installation and tooth accuracy are naturally no problem.
I would also choose MADE IN SUNSTAR if there is nothing else to buy.
View detail
Fits: KAWASAKI ZX-9R, KAWASAKI Z900RS, KAWASAKI Z1000, KAWASAKI VERSYS1000, KAWASAKI Ninja1000
Installed on NINJA1000SX
I changed from OEM 15T to 16T.
Like its predecessor, the NINJA1000SX also has a high CROSSRatio, so the rear has been replaced with a 40T.
I don't think there is any problem with OEM also MADE IN SUNSTAR.
This year, the NINJA1000SX has been equipped with a cruise control, quick shifter, grip heater, etc., and the TourerSports color has become stronger, so I personally think that 16T is the correct GEAR ratio setting.
I don't think you'll regret the exchange.
View detail
Fits: YAMAHA FAZER8, YAMAHA FZ8S, YAMAHA MT-07, YAMAHA MT-09 TRACER GT, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA TDM900, YAMAHA XSR700, YAMAHA XSR900, YAMAHA YZF-R1, YAMAHA YZF-R1M
Cheaper than shady Manufacturer's Products as a result
I got tired of the fact that the roundness of the Sprocket, which I didn't understand the nameless brand I had been using, was bad (the axis didn't come to the Center) and the chain sticking changed according to the place.
You can't be stingy with these things, but only if you use the right Manufacturer's stuff.
Of course, MADE IN SUNSTAR is perfect.
The roundness of the chain sticking is the same no matter where it is measured, and most importantly, the vibration when driving is gone. Above all, the vibration is gone when running.
Speaking of the obvious, I'm talking about Atarimae, but it reaffirmed to me that there are some things that are not good in the world.
Also, SUNSTAR has good teeth.
The shape is neat and standardized, and Chain's bite and separation is very Smooth.
This is the part where even a small difference can give you a tricky feel, so the Hayash domestic products are great.
All Manufactures are made of steel and have no special shape, so people tend to think that the cheaper the better, but that's not true.
There is a decent difference.
I don't want a Sprocket that doesn't roll smoothly, even if it's half the price.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200, KAWASAKI ZRX1100 II, KAWASAKI ZRX1100, KAWASAKI GPZ1100, KAWASAKI ZRX1100, KAWASAKI GPZ1100
three-point exchange
Exchange with Chain and Rear Sprocket. The item is SUNSTAR, same as OEM Product. It is the replacement of myself. I like the stiffness of it. View detail
Fits: HONDA DEGREE, HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250R, HONDA AX-1, HONDA XR250 BAJA, HONDA XR250, HONDA XR250Motard, HONDA CB300R, HONDA XR250Motard, HONDA CB300R
I'm squeamish.
I lowered the price a notch on my cb250r to have a bit more of a torquey feel. It's a bit awkward and I like it. The Sprocket and Chain are quite large parts and the SUNSTAR products are good in appearance and workmanship. The chain is noisy and the cb250r had the same number of hinges as the OEM; I like to change the Chain and Sprocket because I feel refreshed when I change them, and I like SUNSTAR for some reason, so I will continue to use SUNSTAR. I love SUNSTAR for some reason and I will continue to use it. View detail
no doubt
It's not the Merit that you can feel for the Competition products, but it's SUNSTAR, so I think it's the right product. If you are not particularly expensive, the SUNSTAR is the right choice for you if you do not have a large person's situation. The accuracy and shape of the teeth often comes up in the topic, but the accuracy of the spline on the Drive side of the Sprocket is also a large thing. If the worst-case scenario is that Damage appears on the Output Shaft, it will break the engine. View detail
Fits: YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA XSR700, YAMAHA XSR900, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA FAZER8, YAMAHA FZ8S, YAMAHA MT-09 TRACER, YAMAHA TDM900
Safe and reliable SUNSTAR
I always use SUNSTAR for Sprocket. Toothpaste is not a SUNSTAR.
Chain is a combination of DID. It is a safe and secure SUNSTAR because it is cheap, selectable and easy to procure.
It's a brand that can be recommended!
View detail
Conversion to 520
Conversion to the 520, which has become the mainstream of recent Racers, and Friction I bought them both before and after to reduce loss and to make them lighter
In my previous sense, if you make the KATANA a thin chain like the 520, it would break off ? I had some doubts about the durability of this product, but it's been a while since I installed it, and there is no problem with its durability
I was a conversion from 530 to 520, but from the moment I replaced it, it was an amateur's I quickly found that it worked for me
It is also recommended for those who want to ride heavy Katana as lightly as possible for ease of use
View detail
Fits: BMW S1000XR, BMW S1000RR, BMW S1000RR, BMW S1000R, BMW HP4
To change the GEAR ratio
I bought it to change the GEAR ratio
Since Driven Sprocket is also a SUNSTAR, the Drive side is also a SUNSTAR Choice As I expected, the accuracy is good and the chain line adjustment is quick and easy
I haven't driven it yet, so I'm concerned about its durability, but more than anything else, I'd like to commend it for its outstanding accuracy I think
View detail
Fits: KAWASAKI ZEPHYR400χ, KAWASAKI Z400GP, KAWASAKI ZEPHYR400, KAWASAKI KLE400, KAWASAKI XANTHAS, KAWASAKI KLE250 ANHELO, KAWASAKI GPZ400F, KAWASAKI FX400R, KAWASAKI GPZ250R, KAWASAKI GPX250R II, KAWASAKI GPX400R, KAWASAKI GPZ400S, KAWASAKI EX-4, KAWASAKI BALIUS, KAWASAKI BALIUS II, KAWASAKI GPZ400R, KAWASAKI ZXR400, KAWASAKI ZXR400R, KAWASAKI ZZR250, SUZUKI GSX250FX
Reliable SUNSTAR
Purchased to convert the chain size of NINJA1000 to 520
Part weight is especially light compared to the 525 Size OEM PartsFront Sprocket This was not the case
I chose SUNSTAR as a reliable brand and I am satisfied with it
View detail
Fits: HONDA V-TWIN MAGNA250, HONDA VTZ250, HONDA VTR250F, HONDA HORNET, HONDA JADE, HONDA VTR250, HONDA XELVIS
Functionally, I'm happy with it
My VTR250F was too low GEAR, so I changed the front sprocket from 14 to 15 I did
At first I thought about making the Tire flat at 70% without playing around with Sprocket, but I had to do it myself Maintenance
The first thing to do was to exchange Sprocket It was a coverLimit, but it worked fine
There is no problem with it, although there is no rubber on the inside unlike OEM None
The effect feels like a lack of Torque on a 5th speed climb (something you can GEARDown if you need to), but Other than that, I targeted the rest
Street The fuel consumption is also improved by 5-10% and does not fall below 30km/liter The durability is still to come
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS, KAWASAKI ZRX400 II
Reliable SUNSTAR
It's time to replace it, so I bought it!
OEMs are great, but the SUNSTARBrand name got me to buy it! LOL!
Probably cheaper than OEM Parts
View detail