Reviews
Satisfied with Design
I was looking for replacement parts for OEM parts that had deteriorated over time, so I'm glad I found them.
I was concerned about the installation method, which is not shown in the picture, but Instruction Manual is included and it is easy to install. 。
Since the Tire size was increased this time, the Bracket was set to "Quantity" in the Home center.:2pc. Set(Quantity):Pair (for Left and Right) The installation position was corrected by purchasing an additional (1).
The material quality of the product and the processing of the White Gel Coat were satisfactory.
View detail
Fits: SUZUKI GSX-R1100, SUZUKI GSX-R750, HONDA CB1000 SF, HONDA CB400SF, HONDA X4, HONDA CBR1100XX SUPERBLACKBIRD [Super Blackbird]., HONDA CBR900RR FIRE BLADE [Fireblade]., YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJR400, YAMAHA FJ1200, YAMAHA FJ1100, YAMAHA XS1100, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX250, SUZUKI GS1000, SUZUKI GS750, SUZUKI GSX1100, SUZUKI GSX750
Just cover it!
Funnel is bad for the engine and does not pass vehicle inspections. The RAMAIRSystem is a simple system that can be installed on the engine, and it is easier to remove than the Power Filter, so if you want to change to a funnel, you can easily remove it. View detail
Aftermarket parts are well stocked, so there is a sense of security.
I think it is semi-floating, so it should be reasonably durable, but even in case of emergency, it is helpful that all the parts can be purchased at Repair Parts. 。
I am currently using a Brembo caliper with no problems.
Comparison with bremboRotor purchased at the same time.
View detail
Fits: HONDA XL250S L250S, HONDA NY50 All models, HONDA CROSSCUB110 JA10, HONDA All models of GIORNO CREA AF54, HONDA SUPER CUB 110 JA10, HONDA SUPER CUB 110 PRO JA10, HONDA SUPER CUB series Engine cars (50-100cc), HONDA SUPER CUB series Engine car FI, HONDA Spacy50 All models, HONDA DREAM50 AC15, HONDA Spacy80 All models, HONDA VARIE All models, HONDA MONKEY series Engine cars (50-100cc), HONDA MONKEY series Engine car FI
Very common EXGaskett
CROSSCUB110 (JA45) Used to replace the Exhaust System of
I think Gasket is the same for all Manufacturers.
No exhaust leak etc.
It was cheaper than OEM Parts.
View detail
I think Design is number 1.
I was worried about OEM, but the price was the same, so I went with SUNSTAR.
PremiumRACING is a great way to create your own combination!
There are various manufacturers, but I think Design is the best.
View detail
Fits: SUZUKI ST250, SUZUKI ST250E, SUZUKI INTRUDER250, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER BIGBOY, SUZUKI VOLTY
This is my second purchase.
Quantity:It's convenient because it's in a set! It's a great help because it's a hassle to look for a product by looking at the part number!
I buy it with Repeat.
View detail
Beautiful lights
The lights feel and look beautiful and visibility is improved!
As for the price, I personally think it would have been easier to afford if it were a little cheaper.
View detail
rebel 1100 dct
It's perfect for the Rebel 1100 handlebar. It was installed well and tuning was smooth. The delivery and process were perfect. However, it's not for the Honda Rebel 1100 only.
It's a pity that the part needs to be processed.
It's perfect for the Rebel 1100 handlebar. It was installed well and tuning was smooth. The delivery and process were perfect. However, it's not for the Honda Rebel 1100 only.
It's a pity that the part needs to be processed ------------------------------------------ ---------------- It's perfect for the Rebel 1100 handlebar. It was installed well and tuning was smooth. The delivery and process were perfect. However, it's not for the Honda Rebel 1100 only. It's a pity that the part needs to be processed. It's perfect for the Rebel 1100 handlebar. It was installed well and tuning was smooth. The delivery and process were perfect. However, it's not for the Honda Rebel 1100 only. It's a pity that the part needs to be processed. Powered by Google Translator
View detail
Genuine DID replacement chain link
As I said before, I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERV7 is one I do not surrently have in stock so no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. These chains are generally used on tracxk bikes from a 530 or 525 conversion so I do use a lot of them. As you can imagine, I go through a lot. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Genuine Yamaha Bracket 13 for YZF-R1 2016
This bracket had clearly too some hit as it had snapped near to the engine side. Not a big deal but I did want to replace it for one that will hold the fairing well. Finding the right part was easy using the tools Webike provide and cross referencing with Yamaha schematics. The cost was very good value and less than half the cost of buying locally. With some other parts for the R1, I had EMS ship them all toghether so I would get them all at the same time. In 5 days the order arrived and the parts were perfectly wrapped and kept safe. The bracket itself is aluminium but that does not mean it is not strong, I could barely flex it at all which is good. The bends are all correct and align with the fairing and the engine side. SImple to fit but worth the effort knowing the fairing will stay where it is supposed to . Cheap fix, great part, what more can you want. View detail
Gilles High Quality
These Gilles paddock stand bobbins are a little larger than the previous version and use a clever system that holds the spool onto the screw in adapter using a retaining ring inside the spool (see picture). As with the older model the outer spool rotates freely from the adapter when installed. This helps reduce wear on the spool and makes lifting the bike easier. The spool itself is made of a special polymer/plastic that is much harder wearing than Aluminium. The instructions don’t provide a torque setting for the adapter and suggest using a spanner for installation. However there is a Hex fitment on the back of the adapter thread (see picture) that allows for the use of an Allen/Hex key for installation and removal. High quality made item. View detail
Asahi windshield windproof under repair crow model
"If you are a sports fan, you can enter your favorite sports name in the comments section below. If you are a sports fan, you can enter your favorite product name in the comments section below. It's hard..
This screen is unique and has a good appearance. Also, the picture of a small monkey on the transparent glass is very impressive. It seems to be a very good product as it has the advantage of being equipped with or without a windbreak cover.
View detail
Fits: SUZUKI KATANA, SUZUKI GSX-S750, SUZUKI GSX-S1000A, SUZUKI GSX-R600, SUZUKI GSX-R750
KOODAxle Shaft
To be honest, I wasn't expecting much...
The impression may be a bit Largegish, but Motorcycle has become something else.
As for city riding, it has become more stable and easier to ride outclassing, as if it has become a high spec model with a higher motorcycle grade.
I didn't think that just changing one pc of sticks would make such a difference.
View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
Easy to use
I purchased the Round Type because my ST250 has a circular swing arm. I am satisfied with it and can use it without any problem. View detail
Satisfied
I purchased this product to replace my Exhaust System. After installation, there were no exhaust leaks, etc. I am very happy with the product. View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-8S
SDGS
Repair Parts has not been replaced in over a year and is not recommended. View detail
Satisfied
The Jet needle shape was different from the OEM one, but it worked normally. View detail
Be careful when making a hit.
I have not purchased this product in a long time.
It is a good quality pad that can be used on public roads and circuits in all weather conditions.
The Control at the beginning of the grip is similar to the Rear, which is useful when the foot is unstable.
Braking power doesn't matter in the rain, and it doesn't become blatantly ineffective like a cheap Pad.
It's a little further back that you'll get decent braking power compared to the Pad, which has a quicker startup.
The braking force is satisfactory for use on public roads.
With Circuit, you have to grip it hard to get enough braking power.
I guess that's what I'm talking about in exchange for Control.
I have no complaints about the release condition of the Pad at my Level.
Compared to the 6POT Pad, if overused, Lever will be in the back.
But that is only at the beginning. If you adjust Lever to a wider range beforehand and start driving, there is no problem.
I think it is a good Pad to use with BPF, in my opinion.
This level is just right for that characteristic of gripping a little and entering with a "scauper" sound, and then returning with a jerk after releasing.
I don't think the price is too high, so I will still be Repeat.
What you have to be careful about is when you make a hit.
It does not work as well as you might think, so be sure to check the effectiveness of the system or there is a high risk of a rear-end collision.
Be careful if you use Brake strongly from the beginning and stop after a short distance.
View detail
Stable Standard Plug BP5HA
[How is it used?
I thought it was time to replace it in terms of distance, so I ventured to purchase Standard Plug BP5HA this time.
How was your experience with it?
I have a feeling that the fee ring is better than before.
How did it compare to other products?
So far, the same NGK Iridium plugs have been selected.
I have recently been concerned about misfirea from the Exhaust System.
After replacing it with Standard Plug BP5HA, the misfirea was drastically reduced.
[Points to note]
Is Standard Plug BP5HA good for Normal engine?
It is important to clean the area around the plug hole before replacement work.
View detail
Replacement from OEM Product
I replaced the OEMCap that was too assertive for my Black vehicle with this one. It is not a compatible car model, but … I was able to install it without any problems.
I haven't driven the car since it was installed, but I'm happy to say that it looks exactly how I expected it to look with the uniformity of the Black color.
View detail