Reviews
It fits very well with Off-road motorcycle
Large Ki, weight, easy to see etc. I think it is Exactly to Off-road motorcycle. It is a little troublesome to adjust Bracket's hardness several times with a little severe. In addition, MirrorBody is easy to move and it may move by wind pressure on expressway but I think that it is very good Mirror except for it. View detail
It is convenient when going on unpaved forest roads.
Mirror folds easily when going to a dirt road or a galley place
I was looking for Mirror and made it for this.
Thanks to that I did not fall over and break Mirror.
There is also a rubber cover on the joint, so it will not rust.
Yamaha's Opposite Thread Screw Why do I need attention at the time of purchase.
View detail
Useful when running on unpaved roads.
Mirror folds easily when going to a dirt road or a galley place
I was looking for Mirror and made it for this.
Thanks to that I did not fall over and break Mirror.
There is also a rubber cover on the joint, so it will not rust.
View detail
Good
In order to go for a walk along the forest road, I searched for Mirror for Off and chose this product. I still have not gotten any benefit because I have fallen down. I did not expect backward visibility from previous experience of Mirror, but I can see surprisingly about SEROW 250. Because it is lower than OEM, I also liked Style.
View detail
ClubGreen Light Sam.
I think that Mirror in this hand moves the largest Large.
I think that it depends on the car type and use, but it is really convenient on Off-road, it offset me quite a while ago, it really does not get in the way.
I also tried RALLY 50690, but I think whether this is better if I try to fold up on Compact.
The stiffness feeling is somewhat inferior.
View detail
Purchase for forest road
Currently owned XR 230 is Mirror
Because it is NORMAL, when going to the forest road
I had to go after I removed it, but I could not go
It is troublesome that it becomes troublesome
I bought this product this time.
The viewpoint changes slightly compared to OEM so you can get used to it
It was a bit painful, but otherwise it is generally satisfactory.
I had a bit of difficulty with how to install.
Regarding the durability, it still has time to install and run
Because it is about 20 hours, I can not make a judgment.
View detail
Reduction of Mirror corruption Risk
Mounting on SEROW 250.
I knew there was a Mirror that could be folded in a certain moving image site, and found out this item as I was investigating. Other Manufacturer also had similar Concept products, but purchased this as Merit, the size of the operation area.
Mounting is Image while folding the folded state and it goes smoothly as you adjust the direction of the notch in Ball. However, when adjusting the tightening of the working Bracket, the position of the cutout also turns around, so that position adjustment is required again.
Because it is slightly shorter than OEM, the reflection of the body increased somewhat. However, it is possible to secure necessary and sufficient visibility.
Although there is a blur of visibility due to vibration, there is no problem in confirming the vehicle. Also, although there are concerns about loosening, the use period is still short because it is still short.
I think that it will not be damaged by a single shot unless there is a shock from the top with BackFlip etc.. The extent to which Ball joint holds is nothing but a game.
Fold Mirror in front of Meter and it will become a Racer look of Mirror-less. Refreshing appearance.
To put it in detail, BlackBracket was good.
View detail
Convenient Mirror
At the forest road Touring, broke Mirror so purchase.
I was worried about Trial mirror, but I was concerned about the Space of Handlebar and decided to Takatsu Off-Road Mirror II.
Very easy to install.
Impression after driving is slightly harder to see than OEM.
Vibration is not too bad.
The nice thing about this Mirror is folding.
Even safe to moss in forest road.
View detail
It is a standard..
I bought two cars this time. As I purchased it at the time of purchase, I was riding, Mr. Screw tightening at the operating part of the side was sweet and it moved due to vibration.
Because it is not a troubled Large, it is perfect by tightening a little further at Phillips Screwdriver.
In addition, I will purchase the same product when I need it next time.
View detail
A classic off-road mirror
Installation itself is as easy as ordinary Mirror exchanges.
Although there is an opinion that it comes to Gap by vibration, I think whether it will change somewhat also with the tightening condition at the time of fixing.
It is convenient to beat easily in running through a forest road.
View detail
Speaking of for Off-Road Mirror, this.
Even if you are sitting and running normally, the back is easy to see, and even if you standing it does not get in the way.
Foldable so forest road etc. It is safe because it will not break or break even on Off-road.
View detail
Easy to use
Fall over the view at the forest road crashing Miserably split Mirror and hear what is off-road mirror and go to purchase. Visibility, shake is inferior to OEM, but it can be quickly knocked down and at the time of forest road this product. Ordinary Touring is different from OEM. View detail
Used Off mounted on car
Mirror which was originally attached was bad for usability, so I exchanged it.
Installation is almost the same as ordinary Mirror,
It was a bit difficult to adjust the tightness of the retractable part to your liking.
Although it is pretty tightly closed,
Because of 2 strikes, the vibration is serious,
Visibility when driving is not very good.
The part where Arm part is Offset forward, ◎ is not obstructive at the time of standing ◎.
It is a good atmosphere to match appearance of the vehicle a while ago.
View detail
Classic
Originally from the purchase of Motorcycle Left Side was this Mirror. Off-road car is a classic Mirror that is easy to collapse, yet it is easy to use Mirror with less blur even during normal use. View detail
Classic
It is a classic Mirror for Off-road cars. It is easy to use because it can be folded and usually has less blurring against vibration.
Since this Mirror was attached only to Left Side in the purchased Motorcycle, I exchanged Right Side for this Mirror.
View detail
Very good mirror. Very good seller. Great product, great service! In 9 days from Japan to Cheboksary - super!
Very good mirror. Very good seller. Great product, great service! In 9 days from Japan to Cheboksary - super! View detail
It is a time-tested product.It is this too at the Off-road motorcycle.I regard ease-of-use conspicuousness as first. I want you to continue production and sales forever.
It is a time-tested product.It is this too at the
Off-road motorcycle.I regard
ease-of-use conspicuousness as first.
I want you to continue production and sales forever.
View detail
If it is if the Hayashi degree raises with other Impressions and it will shift, but a fasten lump is insufficient, as for Mr. LANZA, 150 to 160 km Max comes out, but inconvenience in particular is not felt.Although an Arm is visible to a pink Gold with a
If it is if the Hayashi degree raises with other Impressions and it will shift, but a fasten lump is insufficient, as for Mr. LANZA, 150 to 160 km Max comes out, but inconvenience in particular is not felt.Although an Arm is visible to a pink Gold with a photograph, it is touch good in a Chrome-plating tone in practice. View detail
It is simple, and and it is a favorite. [ a Position ]CTX and XR have attached this Mirror. When a Motorcycle was truly dropped to a mountain, it broke from the root, but to the part which has ridden ordinarily, it is strong, and easy-to-use to it
It is simple, and and it is a favorite. [ a Position ]
CTX and XR have attached this Mirror.
When a Motorcycle was truly dropped to a mountain, it broke from the root, but to the part which has ridden ordinarily, it is strong, and easy-to-use to it.
View detail
It is satisfied with an angle being changeable by form, the angle which an arm hits in the case of a Standing, and various Patterns. However, a specular surface portion breaks down from a wind pressure to the front at the time of high speed operation
It is satisfied with an angle being changeable by form, the angle which an arm hits in the case of a Standing, and various Patterns.
However, a specular surface portion breaks down from a wind pressure to the front at the time of high speed operation.
Since it is useless although the Screw which stops a specular surface is fastened and it is crowded, it may be ability.
Since it is good if the
Speed is not gathered too much, it is satisfied in general.
View detail