Reviews
2016 manufacturing Cb400sf red gray body with a red frame is the perfect combination in Hong Kong is really hard to find this beautiful thing and hope to find other modified things for the car plus the United States However, I think whether to be hard t
2016 manufacturing Cb400sf red gray body with a red frame is the perfect combination in Hong Kong is really hard to find this beautiful thing and hope to find other modified things for the car plus the United States However, I think whether to be hard to equip an amateur for the structure. Looks nothing like what I revived This is the best choice in the frame Thanks! View detail
Fits: HONDA NC700X, HONDA NC700X, HONDA NC700X, HONDA NC700X, HONDA NC750S, HONDA NC700S
NC750X LD DCT (RC90) Support Not
I confirmed by email to DAYTONA, but I could not install it.
Please be careful.
NC 750X DCT 2016 (RC90) It can not be attached to the.
View detail
With Sub Frame. color : Buffing
If you want NAKED to drive from Sports, it will easily improve the rigidity somewhat.
To that extent, I feel slightly dissatisfied with the rigidity of erect FFork, but to a negligible degree.
I think that I do not mind without a Sub frame if it is just a town ride.
Large There is one problem. This may be limited to car models.
Sports When running with RightCorner Full bank if you make contact with the road surface. It is now about 4 mm shaved.
It is unknown how much the wall thickness of Pipe is, but if you increase the footpeg position and make it bank more, it will be scraped more and then the hollow of the pipe will be exposed.
Those who choose Various Collar should also pay attention to that point.
Damage reduction due to fall is unknown due to inexperience, but unless it is scraped as described above and the strength is not falling down, it probably will show sufficient performance.
In terms of looks, it becomes masculine with a masculine appearance, Large is odd.
View detail
High - - - - -
Slash guard Body
I am very satisfied with the making
Match with the car body and Volume will also come out
Just installed Bracket and Bolt etc
Just Plating zinc to iron too much
At least it is possible to make it with Aluminum or Plating on Beauty
Those who purchased
I think that I feel disappointed except Body
View detail
Purchase for replacement
Although it was installed from the time of vehicle acquisition, because Owner before was once crooked
Since it was deformed, I replaced it with a new one.
With other people 's impressions "As soon as moss deformed" It is natural,
It is the original purpose that it is deformed into Cushion and protecting the vehicle.
"Molded and deformed one is an exchange as it loses its original performance"
Although we replaced the new article this time, it seems that the mossy equivalent has been deformed equivalent to each part
There was also a place where the clearance with Case narrowed by 10 mm or more.
I got lost as having a Sub Frame, but as Maintenance got worse
Select Sub Frame same as mounted item.
Also the color is Black. With Color will be slightly higher.
There are other companies Slider and iron Guard, too, but to Frame
Because it is inevitable that influence will come out, it is dismissed.
They are mainly to protect Rider, the purpose of protecting Motorcycle is unclear.
Instruction Manual is a text that you can not grasp easily if you do not image in the brain.
I think mounting is a simple class,
- Included Parts Front Engine Mount bolt : Work to replace with
In addition to tightening the scraper Bolt with Torque prescribed
- There is a problem with the mounting part of the lower side of the Right Side Frame
Because it is not felt intention at the design stage, it may be a design mistake?
- Jacketc. We need to support Engine in
I need a little twist and it may be Large strange.
I will write the details in the diary so I think that you can refer to it.
Although it is possible to install if there are some tools with basic ponding,
Engine Mount's Balance and tightening Torque management
I need Know-how and SST and I think that it will be hard work.
We encourage you to leave the installation with a bright Shop if possible.
Product Spec. As a product we can recommend as.
View detail
It guarded the engine properly.
I changed it from OEM's Guard to this.
It looks nice too.
Although I stood up several times, Engine was intact. (Of course Guard gets hurt.. )
As a digression, I added a highway peg to the Guard, and the speed became happy.
I asked Shop to install, but it seems that it was Large strange because I pull it on the number line and swoop with Burner.
Crankcase Bolt When exchanged Guard was in the way and one could not be replaced "It can not be removed once" In other words, "C'mon" It was said.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1300SUPERTouring
It is useless.
I was advanced to the Motorcycle shop but it got installed but I got bent easily just by standing at Left once and got bruised at the bottom of Gear case and scratches by Guard.
If you want to buy, we recommend 3 points.
View detail
In the case of external exhaust system, necessary processing
I tried buying thinking emergency things.
I purchased Black's things so as not to make excessive claims.
?Good point?
- Unlike other Guards, it is not local but a sense of security that guards the entire lower part of the Engine
- Since moss is supposed to be crushed, Damage to Frame seems to be done at the Smallest limit
- A calm atmosphere not insisting beyond what I thought (Black case)
?I like it?
- Installation is a little troublesome
- In the case of MT - 09, it is fixed at three places in total of two places of Engine Mount + Bracket, but Bracket part is unreliable
Since Bracket is a rolled-out iron core, it must be painted
- Although it can not be helped on the design of the product, since the Engine part protrudes, it is necessary to be careful with slipping through until it gets used to
- When JPYOSHIMURA's Exhaust System is installed, Bracket and O2 Sensor interfere with each other, so it is necessary to cut Bracket to several millimeters
I think that it is good overall product. It is likely not to hurt Frame at the time of falling by doing Guard to Solidly which tends to be common in Engine Guard, and the probability of falling into running impossible also when it falls by any chance is likely to be low.
The only complaint is that Bracket is Color : Is it the situation of Unpainted and the state of Gold of Iron?. We recommend that you paint it as it is intensely dressed as it is.
Also, if you are exchanging with an external exhaust system, O2 Sensor may interfere with Bracket, so in that case I think that interference can be avoided by cutting a few millimeters of Bracket.
View detail
This “slash guard” from GM for my Honda CB400 is look pretty good. The positioning and it fit just perfectly on my CB 400. I order the buff color and it looks absolutely gorgeous and shiny. The quality is fantastic. Although the price is a bit expensive c
This “slash guard” from GM for my Honda CB400 is look pretty good. The positioning and it fit just perfectly on my CB 400. I order the buff color and it looks absolutely gorgeous and shiny. The quality is fantastic. Although the price is a bit expensive compare with the “made in china one”. The package that webike send to me was excellent pack (no scratch). Well done and thanks! View detail
It was more frustrating than I expected
Although the price is high, I purchased it because I was destroyed by the design nature.
I replaced the Bolt that is installing the Engine to the Frame, but the Bolt behind it was somewhat shorter, and I had a hard time.
Attempting to install it as it is written in the Instruction Manual, it had to do quite a trial and error, and it took me a long time to relive.
Because it was with Sub Frame, I think it was a hard time to attach to Frame in three places.
I feel like I installed it.
I do not want to see the eyes that could damage this if possible - - -.
View detail
Oops - - - - Prevent.
I installed it when purchasing Motorcycle.
For the first time in decades Motorcycle, moreover, Liter machine.
"Oh and - - - - Because Gashan was thought.
Because of budgetary reasons "Black" I could not purchase it,
I wonder... I feel like saying.
I think it would be nice if you could purchase individually for RightorLeft!
View detail
I had it mounted onto my motorcycle when it was still brand new. Just as I suspected, I had a fall when driving at high speed with the motorcycle that I wasn't yet used to at the time. It was scratched hardly but the engine had no damage. I left i
I had it mounted onto my motorcycle when it was still brand new.
Just as I suspected, I had a fall when driving at high speed with the motorcycle that I wasn't yet used to at the time.
It was scratched hardly but the engine had no damage. I left it scratched more than 10 years and decided it was a good chance to replace it with a new one.
The instruction for use is written in hand writing and is inconsiderate.
Well, I was lucky to know what to do.
The spring washer was also out of stock.
The one I got years ago had mounting holes located in the wrong position and I had to get holes opened, but this time they were in the right position.
It might have improved.
Also a rubber plate is attached to the mounting section.
It maybe for anti vibration.
The mounting screws have changed from black screws to plated screws.
Guess they have improved during the years gone by.
When mounting, you have to hold the engine with a jack to remove mounting screws.
Also you'll need a long extension bar and universal joint to tighten the screw on the front left side because the exhaust pipe will get in the way.
View detail
I messed up while driving on a mountain road last fall. But thanks to this guard the engine side was almost undamaged. The shock absorber got distorted and dented by 2mm or so because it touched the aluminum.The other damaged parts were blinker lens,
I messed up while driving on a mountain road last fall. But thanks to this guard the engine side was almost undamaged. The shock absorber got distorted and dented by 2mm or so because it touched the aluminum.
The other damaged parts were blinker lens, brake pedal and the lever. How terrible! This guard was the insurance against my inexperience, and I am both relieved and sad to know that it has served its function.
View detail
I purchased black with 2 supports. I've tried both left and right. It will hit the ground due to banks and'll chip off badly because its made from aluminum. As a matter of fact it may be ineligible depending on the intended use of the motorcyc
I purchased black with 2 supports.
I've tried both left and right.
It will hit the ground due to banks and'll chip off badly because its made from aluminum. As a matter of fact it may be ineligible depending on the intended use of the motorcycle.
I purchased a 2 support for my CB1300. So when I fall, the guard moves upwards and touches the crankcase where it makes a scare. So anyway I end up with a damaged crankcase.
It might be better to get a 3 support.
At my second fall I got a crack on the mounting section on the engine side. I might not have a next chance.
The scares on the guard can be covered with a black fiber pen.
It seems to lack function because it's made out of aluminum and only has 2 supports but you might be able to avoid damages and use it longer if you don't make big falls.
View detail
They say that Hornets get there tanks damaged when they fall, and I was so concerned I ordered this before the vehicle was delivered. lol. I chose black anodized aluminum to match the body color and it took about a month for delivery. When you're
They say that Hornets get there tanks damaged when they fall, and I was so concerned I ordered this before the vehicle was delivered. lol.
I chose black anodized aluminum to match the body color and it took about a month for delivery.
When you're mounting, there is little space around the inserting section of the frame on the lower right side so you have to adjust the width of the board on the product side using a leutor and cloth file. (It just might happen to be solid difference.)
There's nothing else difficult only maybe that you have to raise the vehicle with a jack so that the engine doesn't lower its position. So I assume you won't be able to mount it with on-vehicle tools.
The color matches the body and looks as if its an OEM product.
I'm not yet sure about the effect, but am satisfied with it because of the secure feeling it gives me.
View detail
An amateur can also be attached if this Slash guard has even a tool.Pains were taken for a while to attach since the picture of the description was not rude & color. Since it has not failed to get off the ground yet, there is no telling how much
An amateur can also be attached if this Slash guard has even a tool.Pains were taken for a while to attach since the picture of the description was not rude & color.
Since it has not failed to get off the ground yet, there is no telling how much reliability there is, but appearance is very smart and I have said it to mind.after -- to a slight degree -- cheap -- I thought ~ [ if ].
View detail
GLADIUS650 650 is equipped.Although the price was higher, since there seemed to be least influence of appearance in the Engine guard of a GLADIUS650, this was chosen. When this Slash guard attaches, it sandwiches a Cushion rubber between an E
GLADIUS650 650 is equipped.Although the
price was higher, since there seemed to be least influence of appearance in the Engine guard of a GLADIUS650, this was chosen.
When this Slash guard attaches, it sandwiches a Cushion rubber between an Engine and a Guard, but since the sound insulation cover on the left-hand side of [ a certain ] an Engine is not 650, the left-hand side cannot attach a Cushion rubber to GLADIUS650 400.Although it is
, I think that the Guard itself is helpful when it becomes hollow, since it is being fixed firmly.
View detail
I had you equip by simultaneous purchase at the time of vehicles purchase. If it is called an Engine guard, I will usually think whether there is any large Image with a bad lug Parenthesis, but the circumference of an Engine regards this as becoming
I had you equip by simultaneous purchase at the time of vehicles purchase.
If it is called an Engine guard, I will usually think whether there is any large Image with a bad lug Parenthesis, but the circumference of an Engine regards this as becoming still smarter for structure which covers an Engine.
However, I think whether to be hard to equip an amateur for the structure.
View detail
Looks nothing like what I revived, doesn't fit to motorcycle, bolts are not the correct size!!! Can't use this product as is, would have to make a lot of changers, when you try and bolt it on it would hit the engine as well
Looks nothing like what I revived, doesn't fit to motorcycle, bolts are not the correct size!!! Can't use this product as is, would have to make a lot of changers, when you try and bolt it on it would hit the engine as well View detail
Since the Tandem was carried out, the highway had not been run yet, but with the Speed, vibration of an Engine thought which is on a car body, and purchased with the Sub frame as reinforcement of a Frame. Truly Pains was taken over attachment as y
Since the Tandem was carried out, the highway had not been run yet, but with the Speed, vibration of an Engine thought which is on a car body, and purchased with the Sub frame as reinforcement of a Frame.
Truly Pains was taken over attachment as your comment.
He has understood the
instruction manual despite attachment.
Although it devised and attached so that there might be no
Engine [ itself ] omission Since about 1 mm of Bolts of Engine right-hand side and the one upper part shifted and did not enter well, it attached with all its strength, turning a Bolt.
Difficulties bought, and with it being, even if, it is satisfied with the result.
I would like to expect after
from a function surface.
View detail