Reviews
If you are prepared …
It is not too conspicuous than the large engine guard, and I think that damage to the engine and the car body can be reduced in case of emergency.
The logo is Accent and I like it.
View detail
Just the right amount of non-intrusive presence.
[How is it used?
In Use.
Was the one you received as per Image?
As per Image. buy AGRASwith Logo.
Was the installation difficult?
You will need to remove the Engine Mounting Bolt, which is easy if you have a tool such as Long's Spinner Handlebar.
How was your experience with it?
The amount of protrusion is the minimum height that can be expected to be effective without interfering with riding.
The Side cowl is removable without removing the Slider, which is a good maintenance performance.
[Included Parts:were they on?
BrandSticker
[Was there anything that disappointed you?
I've had an experience where the Slider Logo on the other vehicle came off due to detergent when Shop washed the car.
Be careful when handling Sticker. It's a shame because if it wasn't for this, the quality rating would have been higher.
Other items that would be helpful
Points and hangs for installation:When removing the Engine Mounting Bolt, it is recommended to support the Engine from underneath so that the load will not be applied and the work will be smoother.
View detail
For Cowl protection purposes!
I bought mine from WehBig through their physical store!
I wore it as a tranquilizer to protect my Cowl when I was standing on it.
I was troubled with Babyface until the end, but I chose this one because AGRAS is installed in a lower position.
No drilling etc. is required to install!
View detail
AGRAS is a careful finish.
This is AGRASSlider, which I am familiar with every time. He arrived at KATANA which I bought jointly with my brother. I think that there are many Wakayama riders who love AGRAS. We know AGRAS well because their factory is in our neighborhood. Anyway, AGRAS's products are all polite and worth more than the price! View detail
It's a relief to have.
I installed it on the 100th anniversary color, and I think it looks cool and comfortable.
As for effectiveness, I wouldn't try it again in the future if I could, but Cowl's scars are
If it is the smallest limit, it will be helpful.
View detail
Your neighborhood AGRAS is the best in the world.
AGRAS is in my neighborhood, so every time I buy a motorcycle I go there and buy all the items I can use! View detail
Your neighborhood AGRAS is the best in the world.
If you install the engine slider, you should also cover the generator and clutch. View detail
Your neighborhood AGRAS is the best in the world.
When it comes to motorcycle sliders, AGRAS is the one! View detail
Your neighborhood AGRAS is the best in the world.
Since it was a For Racing vehicle, the protection of the machine is essential for us who are self-propelled riders, so full AGRAS equipment is basic.
AGRAS spends a lot of time developing and testing its products on the Circuit and on public roads. AGRAS products in your neighborhood are the best in the world!
View detail
Your neighborhood AGRAS is the best in the world.
Who better to manufacture Motorcycle Sliders and Rear Sets than AGRAS?
The passion and effort that goes into the development of a bike is tremendous. So when I buy a motorcycle, I always go to AGRAS and ask them if they have any items that fit my bike and have them installed on my bike.
View detail
excess packaging
I was afraid that I would not be able to run the SV even if I fell over, so I bought it with the intention of insuring myself with the Slider. The accuracy is perfect. The packaging was as big as a zoned box. I don't have a car, so it's hard for me. View detail
Think of it as a holding rod and it works.
Front tire in the sand while practicing figure 8
Toppling over 。 It has little effect as a slider, and is effective as a stumbling block to protect the Radiator.
The slider was used as a fulcrum, and the front blinker to the front blinker to the sazae-san cowl, the headlight was deeply scratched and the handlebar was bent.
It was fortunate for me that I was able to remove the nut on the other side of the bent slider part because it was Both SidesNut tightening, unlike NORMAL.
View detail
I'm glad I had it on
That's when I had a standing mishap on the Right Side the other day
Thanks to the AGRAS Slider and OEM Exhaust System?
The Cowl and Engine Cover were not damaged in any way in
Damaged areas include a small amount of OEMMirror, a small amount of Bar End, and
OEMExhaust System is a trace amount
It was really helpful
View detail
It's safe to wear, and it's a walking stick that you'll never have to worry about
Installation is very easy
When you get into the car, you can hardly see it, but it makes a little presence in the side view at the time of stopping, and it is very cool Good
I bought the single color Black, but the Red with Logo One Point might be even better! I think
I don't want to imply the Protection effect
View detail
Fallen cannibals
You never know when disaster will strike
I don't want to regret it after I've done it
I decided to put it on first
The PenetratingBolt that connects the Engine and the Frame is removed
Replacement Type
Manufacturer's version for GLADIUS650400 is used
(ManufacturerCatalogue has the same part number for the SV650)
This Manufacturer is available in parts Single Body (resin part only)
I liked Merit and bought it!
Please refer to the manual for installation instructions
Jack under the Engine
It says to install it
You don't need a jack to install it
(This Bolt is not the only thing holding the Engine together.)
But please use your own judgment here
The tightening torque at that time is described in the instruction manual
It's not written
When checked with SUZUKI Maintenance Manual, it is 93kgf-m
It's a Slim Engine, so if the parts stand out
I thought, but the right amount of volume on both SIDE
I think it's better now that I'm out, and it's less noticeable
With this Size (Large size), you can use not only EngineCrankcase, but also
Radiator damage and water MOLLET will also protect you
That sounds pretty reassuring
The only thing left to do is to make sure that there are no emergencies
Just try to drive carefully
View detail
It's a bit expensive
It's a bit expensive, but I bought it because I trust AGRAS products
i wasn't a big fan of the with Logo, but when I installed it, it was pretty good Parenthesis is good
The Slider itself seems to protect the Motorcycle with a Large texture
Installation accuracy is still AGRAS, so it's great
View detail
I still trust AGRAS
I still trust AGRAS
I decided to buy it because of a review by another person who said the Cover would crack if it fell over
Installation accuracy is good, and the Bolt one is also good Material
The Instruction Manual is also easy to understand
I don't want to fall over, but it seems to protect the Engine Cover effectively
View detail
The texture etc. is good Installation would be tough for an amateur
Very good shape and texture, and I am very happy with it
However, despite the fact that it is something that needs to be drilled into the Cowl, it does not include the pattern paper etc Also Use the engine mount at the front of the cylinder to mount it and no pictures etc. at all To be honest, I don't feel like drilling on my own responsibility Even if a manufacturer doesn't carry it, the patterned paper is usually available in Large &hellip ;
This alone is enough of a Large weird task to reduce 2 stars
View detail
Damaged by a low-speed fall on a public road
Used in GSX-R1000 K7
When I rode in the cold winter months, the Tire wasn't warmed up and I had to make a Right break from a pause SlipDown
In that case, the Slider was shattered and the Mounting Bolt was bent The collar of the Aluminum Collar and the collar of Frame side of the original part was also bent by the effect Slightly deformed
Damage of the vehicle is shaved off of the OEM exhaust system, side cowl Crankcase was shaved, Brake lever was bent, and Slider was cracked Without it, Damage would have been much smaller
It may be because it's been a few years since it was installed, or it may be because the temperature was low, or it may be because it was originally cracked I don't know if it is an easy material to use
We won't know its true value until an emergency occurs, so …
I think it's best to think of it as just a good luck charm for standing back; SlipDown doesn't give you much hope!
View detail
Just in case
I don't want to be as helpful as possible, but I put it on just in case
I left the installation to the motorcycle shop, along with the Radiator core guard
View detail