Reviews
Fits: YAMAHA XJR400R, YAMAHA XJR400
Comfortable to use
[How is it used?
The Brake and Clutch lever of the XJR400R has been this product since purchase.
Was the one you received as per Image?
It was originally attached, so it is hard to say, but I think it is as shown in the photo.
It would be nice to have many colors to choose from.
Was the installation difficult?
I think it is easy, even beginners can do it by watching youtube etc. where many people explain it.
How was your experience with it?
It is quite comfortable to use, and the short type is suitable for old cars and easy to grip.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
The anodized part seems to have faded considerably with age, which was a personal disappointment point for me.
View detail
Fits: HONDA CB400SF, HONDA CB400SF VTEC SpecificationsII, HONDA CB400SF VTEC SpecificationsIII, HONDA CB400SUPER BOLDOR
Aluminum Billet Lever
I bought this to change the color of the Brake and Clutch lever.
I liked the combination of Silver×Green Light and decided on Eukanaya.
I like the design and quality.
View detail
Recommendations on Dress-up
There is no problem with NORMAL, but I installed it with a little dress-up.
There is no rattle, the texture is good, and the Grip area feels tighter. It feels a little stiffer than the NORMAL when you grip it, but it doesn't feel nippy all the time.... Well, it's just that when you get stuck in traffic, maybe it will seem tighter. If you are worried about it, it might be safer to choose Long lever or Touring type.
It looks good and is a recommendation for dress-up.
View detail
Fits: YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX155
easy to grasp
The OEM Brake lever position was not quite right for my hand, so I went with Lever with Adjuster.
It's better than OEM because it can be adjusted in 6 steps and my finger is Fit to Lever.
View detail
Fits: DUCATI SCRAMBLER CLASSIC, DUCATI SCRAMBLER FLAT TRACK PRO, DUCATI SCRAMBLER FULL THROTTLE, DUCATI SCRAMBLER ICON, DUCATI SCRAMBLER SIXTY2, DUCATI SCRAMBLER URBAN ENDURO
Closer, but farther.
hmm
I installed it on my DucatiSCRAMBLERsixty2 and it's closer but that's it? The closest I could get it. I made it the closest and it works for small people with small hands.
If you put on thick Gloves in winter, it will be difficult to operate at a distance.
I hope they will think a little bit more and make it so that the distance can be adjusted closer, because there will be no one who buys an adjustable type and adjusts it far away. The quality of this product is reasonable for the price, but it is not so different from cheap 2-3 thousand yen ones. I was expecting a high price, but I failed.
If you're a woman, you'll definitely find the Clutch lever difficult to operate with it being so far away.
View detail
Large satisfied
It has a high quality feeling and the feeling of using it is better than other manufacturer's products. View detail
With Adjuster, you can be as far or as close as you want!
I installed U-KANAYA's Short Type Handlebar Lever with Adjuster on Grom JC92.
The color is Titaniumium color for both Lever and Adjuster, and I like the chic look.
I'm a large handed guy, but the OEM lever felt far away from both the clutch and front brake.
To improve it, I changed it to something with Adjuster.
As for the installation, just remove the Nut from the back of the front brake, loosen the Bolt with Spanner from above, and pull it out.
The Clutch Side can be removed by removing the Nut on the back and loosening it from the top with a slotted screwdriver.
Align the notch in the Wire adjuster for the Clutch adjustment so that the Wire can be pulled out, and remove the Thailandco at the end of the Wire.
Then you can put it back on like it was on the original.
Don't forget to Grease up the moving parts at this time.
I use AdjusterLever with 4 steps back from the far end.
It can be operated with Non Stress and I am very satisfied with it.
As a nice side effect, I no longer get stuck on the Lever when I flip the Motorcycle Cover.
It's a veryRecommendation!
View detail
U-KANAYA Standard Type Aluminum Billet Lever
I chose U-KANAYA which I had put on with CB400SF before.
Solid construction and good looks.
The price is reasonable.
Just right for a little Accent.
View detail
Quality is very different from cheap ones.
Whenever I buy a motorcycle, I use U-kanaya's lever for almost everything except for the scooter. The goodness of making is different. View detail
Large satisfied!
I installed this on my MT09 2018 MODEL.
It is good because it is easy to grip with short lever and has 6 levels of adjustment.
View detail
Fits: YAMAHA MT-09SP, YAMAHA MT-09
Large satisfied
I installed it on my YAMAHA MT09.
The texture is great and the Lever can be adjusted in 6 levels to fit your finger length.
It is relatively easy to install even for those who do not have much knowledge.
View detail
Fits: HONDA HORNET900, HONDA HORNET250, HONDA HORNET600
Dress-up of HORNET250
The HORNET250OEM Lever was not enough, so I replaced it with this one.
If it is OEMLever, both Clutch and Brake can not adjust the distance, but if you use this, you can adjust the distance just right, so it is a very helpful substitute for me who has small hands.
I think it's easy to find the right place because the adjustable steps can be adjusted in 5 or 6 steps and rather finely.
Design can be changed to various images by combination, and Dress-up effect was also Outclassing because it can be changed as you like according to the appearance of Motorcycle!
I had a fall once, and I was wearing this, but it didn't break or anything, just scratched a little.
I don't think the weight of the Clutch will be any different from the OEM.
As for the installation, it is easy to install with simple tools. It only takes about 10 minutes for both.
The design also gives a luxurious feel, and you can even adjust the distance, which is a good thing, so if you're thinking about it, I'd definitely recommend replacing it!
View detail
Fits: HONDA CB400SF, HONDA CB400SUPER BOLDOR
Installed on CB400SF (made in 2008)
I liked the OEM Clutch, but the light grip makes it easier to control when riding for long periods of time.
It looks gorgeous.
View detail
Fits: KAWASAKI NINJA250R, KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA2 Helmet50RSL
The product is as expected.
[How is it used?
I've had it installed for about two weeks.
Was the one you received as per Image?
It was luxurious and as per Image.
Was the installation difficult?
As long as you have the tools, even a beginner can install it, but you may not be familiar with the Quantity:Pair (for Left and Right) It took about 30 minutes in
How was your experience with it?
It is shorter than the OEM and easier to grip. Also, my hands are small and I was tired easily with the OEM, but since there is an adjustable lever, I can adjust the distance to my liking and I feel less tired.
[Included Parts:were they on?
BodyQuantity:Pair (for Left and Right) Instruction Manual, Instruction Manual (Seal), Yukanaya Sticker (Seal)
[Was there anything that disappointed you?
Not particularly
[ITEMS TO BUY TOGETHER
It may be obvious to those who are familiar with it, but it requires Grease.
View detail
Fits: HONDA CBR400R, HONDA 400X, HONDA CBR400R, HONDA CB400F, HONDA 400X, HONDA CB500F, HONDA CB500X, HONDA CBR500R
Kanaya's Lever has good texture.
I purchased the Standard Type.
I had trouble with Touring type, but I use it without a problem.
The texture is good and it is easy to grip. I have small hands, so I can adjust the clutch lever.
It was easy to install and even I, a beginner, had no problem doing it.
View detail
OK
It's well built and most importantly cool. I recommend this product. View detail
Fits: YAMAHA XJR400, YAMAHA XJR400R
Looks great and product is very good
It is very nice because it is lighter than OEM Product and it looks good.
The price is high, but the product is good and well packaged, which makes sense.
There was no installation manual type thing, and that was disappointing.
Now, it is possible to search the Net, so I did not have any trouble with Large.
As for the feeling of use, Lever moves smoothly though there is a thing that Grease up newly.
Lever adjustment Dial is also easy to handle and I am very satisfied with it.
At the time of installation, it is good to prepare all-purpose Grease, PartsCleaner, Dustcloth, etc.
View detail
Fits a 2019 MT09-SP
I bought this because I wanted to get closer to the lever than OEM, but because it's a Short Type, it won't fit people with 4 levers. The lever is closer than OEM without any problem. The manufacturing accuracy is also not a problem at all. It is just a pimping. It's not the cheapest, but if you want to lose money on a cheap product, this is the way to go. View detail
Fits: HONDA CB400SF, HONDA CB400SUPER BOLDOR
First, Lever exchange
Easy to install! And it looks great! View detail
Fits: HONDA CB1000 SF (Big One), HONDA CBF1000F, HONDA X4
4.4
Installation and accuracy:Installed with no problems. As expected of a JapanManufacturer.
Quality and texture:Material:It's Aluminum so the texture is very good. It certainly looks like it's made of good Aluminum.
Shape:Compared to the OEM, the shape is straighter and more comfortable to use. It also depends on which one you prefer.
Feeling:I changed to a Foldable one right away, so I'm not impressed. It didn't seem to have any problems.
Cost performance:Quantity:The price for the set is quite good.
Overall rating:buy.
View detail