Reviews
I attached it to the 16th year MODEL of zx6r.
Performance itself is as expected and is generally satisfying. One thing I was concerned about is that when you attach it with DRing of Helmet, when you remove the key, since Helmet and the keyhole's clearance are few, it is a little hard to work by turning the key. I do not think we can use it, so I do not think there is any problem with Large.
View detail
We purchased Helmet for theft prevention.
- There was no Helmet holder in the car body, I always hung Helmet to the Mirror, but because I became uneasy I bought it for theft prevention.
- When attaching Helmet, it is difficult to attach because it is narrow with Cowl and Holder is in the back!
- expensive
View detail
Installed in the 2014 model ZX-6R.
I got lost as KIJIMA made, but BABYFACE made a purchase I thought that there was Helmet lock between Tandem Footpeg and it was inconspicuous.
Please note that you can not install it unless you remove Cowl for installation.
View detail
It looks like Parenthesis but it feels not practical
Although I bought it while watching Review, did not fit the shape of Motorcycle? Because Helmet does not hang on Holder, Helmet comes in contact with the car body, so if you are worried about scratching the car body too much I can not recommend it.
After all, I repurchased another Brand's item.
View detail
I use it by attaching it to the ZX - 6R 2014.
OEM lock was hard to use, so I purchased and installed it.
When I bought it seemed there were no other options.
I am using it conveniently without particular complaints.
Now it's a bit cheaper from KIJIMA so if you try to compare it.
View detail
There is no loss.
I thought it was inconvenient to carry Helmet with me at the Touring destination.
It is troublesome to carry Wire lock separately.
Replacement, installation completed within 10 minutes.
Price is high, but it is generally satisfactory.
View detail
Helmet holder
I installed it on the CB 1000 R
Installation was easy, too.
Functionally enough
BabyFace's Sticker was also on
Because it is cheap in terms of price
I think that it is an excellent product of COSPA
View detail
Fits: HONDA CBR400R, HONDA CB400X, HONDA CB400F, HONDA CB500F, HONDA CBR500R, HONDA CB500F, HONDA CBR500R
The item arrived 1 week after i made the order and i am pleased with what i get.The item is easy to installed and the end result is fantastic and i will consider buying again in the near future.
The item arrived 1 week after i made the order and i am pleased with what i get.The item is easy to installed and the end result is fantastic and i will consider buying again in the near future. View detail
It was pure, when attached from the beginning, he did not buy an external article and it did not have a key too much, but since it might separate from the time Motorcycle of the grade which is a Touring, the lock perfectly carried out by theft prevention
It was pure, when attached from the beginning, he did not buy an external article and it did not have a key too much, but since it might separate from the time Motorcycle of the grade which is a Touring, the lock perfectly carried out by theft prevention was purchased.Since appearance is settled in such natural touch that it takes that it is pure, it is satisfactory.I think that buyers will also increase in number if
can be carried out and it will be put on the market for about 3000 yen a little at a low price.
View detail
Although the accuracy of the Mount to a main part is good, if the Cylinder of a lock part is made to slide, since there is much blur, it will not enter in many cases.A Mount is touch as a cheap article Chinese-made [ locks / made in Japan and ]. -- si
Although the accuracy of the Mount to a main part is good, if the Cylinder of a lock part is made to slide, since there is much blur, it will not enter in many cases.A Mount is touch as a cheap article Chinese-made [ locks / made in Japan and ].
-- since the attachment Bolt to a main part is unreserved again --
-- A theft is carried out if it is so minded... although there is probably no
choice, there is nothing -- coming out -- the shin.
View detail
A Helmet Hook of Ninja650 does not come out, unless it removes a Rear seat. -- removing a Rear seat at every time -- just for a moment . It can attach with one Driver. Now, it is opened wide from the troublesomeness which a Rear seat remo
A Helmet Hook of Ninja650 does not come out, unless it removes a Rear seat.
-- removing a Rear seat at every time -- just for a moment .
It can attach with one
Driver.
Now, it is opened wide from the troublesomeness which a Rear seat removes.
View detail
The product itself has improved like an original manufacturer's product. It seems that the latest Motorcycle is in the place where a Helmet holder is hard to use it, and it must use such an external article. Since it is the structure where Ninja
The product itself has improved like an original manufacturer's product.
It seems that the
latest Motorcycle is in the place where a Helmet holder is hard to use it, and it must use such an external article.
Since it is the structure where
Ninja250 is about the place which is not completely practical, and gives a crack to a Rear cowl (certainly), a product of this sort is indispensable.
View detail
It attached to Ninja650 for 13 years, and carried out. Since an authentic positive one had to open the Rear seat specially, it was troublesome. This product was easy to attach. Since it is hard to insert a key when removing a Helmet, a little hangs are
It attached to Ninja650 for 13 years, and carried out. Since an authentic positive one had to open the Rear seat specially, it was troublesome. This product was easy to attach. Since it is hard to insert a key when removing a Helmet, a little hangs are needed. View detail
Since it acts as Locke and a Helmet can be hung and placed, it is convenient to leave a few. Since one Bolt also only exchanges attachment, it is easy. Since it however interferes in a Step when a Helmet is hung, he is trying to impose only the
Since it acts as Locke and a Helmet can be hung and placed, it is convenient to leave a few.
Since one Bolt also only exchanges
attachment, it is easy.
Since it however interferes in a Step when a Helmet is hung, he is trying to impose only the point slowly carefully.
(Multi-TEC of a we SHOEI)
View detail
Fits: DUCATI MONSTER1100/S, DUCATI MONSTER796, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER696
[Webike Monitor] It attached to compensate for Helmet purchase. Although he thought whether it could attach unless it removes a Tank cover until he buys it, it was able to attach as it is. I think that it however cannot fasten a hexagon so
[Webike Monitor] It attached to compensate for
Helmet purchase.
Although he thought whether it could attach unless it removes a Tank cover until he buys it, it was able to attach as it is.
I think that it however cannot fasten a hexagon socket head cap screw unless the hezagonal wrench used at the time of attachment is a Ball point.
Since the
price is partly higher than a market price, they are four stars.
View detail
Only for a vehicle type can be carried out and it is attached to it being.It has attached easily only by removing two Screws and attaching with an attached Screw (6-mm hexagon head).Since the Lock pin is short, a Helmet is attached directly and it is hot,
Only for a vehicle type can be carried out and it is attached to it being.It has attached easily only by removing two Screws and attaching with an attached Screw (6-mm hexagon head).Since the Lock pin is short, a Helmet is attached directly and it is hot, but it is attached once.If it uses well [ a Wire etc. ], it is attached comfortably.Since it was safe for the business in an Impression, the Screw was fixed by the Lock tite. View detail
MONSTER1100/796/696 attached under a Tank The Helmet lock for MONSTER1100 EVO was put on the market in the midst of examining the Helmet lock of 用. It fixes to the Screw under sheet, and attaches pure. Combined use with the Glove rail made from
MONSTER1100/796/696 attached under a Tank The Helmet lock for MONSTER1100 EVO was put on the market in the midst of examining the Helmet lock of 用.
It fixes to the Screw under
sheet, and attaches pure.
Combined use with the Glove rail made from
Ducati Performance is also possible.
Although that the
keys increase in number may have resistance, since you do not need to walk around with a Helmet, it is large satisfaction.
View detail
It arrived and attached instantly. A main part is pinched between the Tandem step and a Frame, and it is only easy wearing fixed with an attached Bolt. Although it was also in the instruction manual, the Bolt loosened easily, and since like, I t
It arrived and attached instantly.
A main part is pinched between the
Tandem step and a Frame, and it is only easy wearing fixed with an attached Bolt.
Although it was also in the
instruction manual, the Bolt loosened easily, and since like, I thought that a Screw-lock agent was indispensable.
When the
Helmet is attached, it is stopped firmly.
In order to avoid interference with a Chain, if
jaw string puts in the Helmet, he will think that it is good.
A Helmet can be locked also while loading the sheet with the load now.
The
destination is also safe.
View detail
[Webike Monitor] There is no Helmet holder of what purchased GSXR750, and I was always troubled by a space. A good thing is discovered by Webike at such time! It purchased without wavering. For the first time in the activity beyond exp
[Webike Monitor] There is no Helmet holder of what purchased
GSXR750, and I was always troubled by a space.
A good thing is discovered by Webike at such time!
It purchased without wavering.
For the first time in the activity beyond
expectation, without putting on a Tank top or a Mirror, he can always feel easy and could leave the Motorcycle.
those who have ridden on
GSXR750 (2011)! buying this -- it is -- !!!.
View detail
Fits: APRILIA RSV4, APRILIA Tuono V4, APRILIA RSV4, APRILIA Tuono V4
a [Webike monitor], since a helmet and a tire or fender hit ordinarily although attached to TUONO V4R which is using the same frame. those whom the crack of a helmet worries cannot recommend you -- V4R -- whether to be characteristic and the loading n
a [Webike monitor], since a helmet and a tire or fender hit ordinarily although attached to TUONO V4R which is using the same frame.
those whom the crack of a helmet worries cannot recommend you -- V4R -- whether to be characteristic and the loading nature changed and attached to the thing of 25L since the attached M6x30L flat head bolt was long although I do not understand -- I think that those who use for nil V4R although it is kind parts are chosen
View detail