Reviews
Very good Reasonable and recommended
Without the Fork spring kit for the ZEPHYR 1100 RS, I knew that the release for the RS from Hyper pro was released without hesitation..
As I ran a lot of distances, the state where the Front is fluffy and uncomfortable in high-speed driving and Cornering, like the lie, the Corner can now run reliably and comfortably with Corner.
Just because the Front is too firm, the Rear suspension loses this time and in the situation that the Rear becomes uneasy in Cornering (Lol)
Next time I will exchange Rear suspension ♪
View detail
Sports just right.
In the past, OHLINS Spring was put in accord with OH of OEM Front fork,
In this OH, I decided to insert Spring of Hyper pro recommended from Shop.
As a replacement comment, compared with OHLINS,
There is an impression that the ride comfort of low to medium speed has improved.
From OHLINS, low speed to high speed range (For me) Until
It was an impression that it was tightly done,
Hyper pro makes better when there are few Stroke
The Front suspension moves, and when heavily weighted, it is regarded as tightly
It feels like.
If you can afford Gold, OHLINS per Front fork
It would be better to change to around,
With this gold amount, because you can change the ride taste, COSPA also
I think that it is excellent..
Simultaneous exchange of OH for Front fork is recommended.
View detail
This effect is amazing at this price
I often listen to the goodness of the outside Spring, so I tried to exchange it overhaul.
I felt the feel was too hard at the moment when I got on the Motorcycle after the exchange, but when I started running I noticed that it was moderately hard.
First, when stopping at a signal wait, OEMSpring sinks the Front and its posture has been a front sway, but after the exchange it will stop without sinking. This is a very wonderful effect as it makes life easier to become easy when riding a Motorcycle for a long time at Touring.
Next, as the Front becomes a solidified behavior, Motorcycle Response to the driving operation of Handling, Axel, Brake becomes faster. For those who like to run lazily with Touring, it does not matter much, but for those who prefer Winding or Sports driving, they show absolutely a large effect of improving operability.
It is wonderful that these effects can be obtained at this price, it is a recommended item.
View detail
Fits: HONDA CB400SF VTEC 3, HONDA CB400SF REVO, HONDA CB400SB
On the way to OH
Since I came up with a new car and exceeded 20,000 km, I took the opportunity to dress OH and took over the suspension.
It is good to be a vehicle type Exclusive Design, the suspension length is somewhat longer compared to NORMAL and reverse winding makes the lower part dense wound. Is not this the liver.
Ride comfort was slightly harder compared to NORMAL, but it was slow, but decelerated, the effect was clearly understood at stop. NORMAL will come back fro after sinking but HyperPro did not feel the feeling of fluff. (It is a personal impression) It may be the best in a city with a lot of Stop & Go unexpectedly.
I think that it is a product that is invisible from the outside by saying Suspension of FFork, but it is a commodity that is priced more easily in hand than Rear suspension,
View detail
GSX1400
GSX 1400, Overhaul In addition, replacement
Was. At the pass, it became easier to defeat.
Overhaul In addition, the replacement Recommendation
I will do it!
View detail
Exchange after OH
In the Restore of FJ 1200, Spring of Left Side's Front fork seems to be stuck, so decide to exchange.
I was worried about White power, but choosing Hyper pro in terms of delivery time and price.
Longer than OEM at assembly (Is it about 50 mm long? It was really hard to get in.
Tightened Cap bolt while pushing Spring in.
As it is in other people 's impressions, I thought that it was for 3 different models, not 3 X W.
For the feeling of riding, the initial load is set to the Smallest, but it seems that Front is slightly bounced and a bit hard..
It is a dangerous feeling in Corner where the road surface is rough.
On the other hand, I feel that it is absorbing firmly at high speed.
Overall, I wonder if I can be satisfied altogether.
Believe that it is really 3XW - - -
View detail
Fork Spring specialized in STREET
I attached it to MT-09.
Purchase a second used Fork set in a certain Oakoshi, Both SidesDamperSpec from Standard's One SideDamper. I installed it next.
【What made you decide the purchase?】
Originally I did not intend to exchange Spring, but from an active sales person at certain Events
"It will be easier to get on to STREET than OHLINS" "Please think that I was deceived and try it!" I was worried because I was told.
I purchased a used Fork set, so I bought it on this occasion.
【How was it actually used?】
I felt it was very hard in the stationary state right after the exchange.
But when I actually ran, it worked properly in the scene I wanted to move with a mysterious thing, and in the scene where I wastefully fluffy when I did not want to move until now it changed to a feeling with a stiffness and the ride feeling became very good It was.
I think that Damper became Both Sides and damping power doubled simply because I think that it is Large, but for the moment I am very satisfied.
【Mounting was difficult?】
I got a Motorcycle store to install it.
Although I was watching all the time, since special tools are necessary, those who do not have such environment are obediently Motorcycle shops and Motorcycle supplies stores etc. etc. I think that it is better to have them installed by.
【Please tell me the installation point and hang】
Same as above
[Is there anything I was disappointed about?]
Position where Motorcycle shop set because Spring's free length is shorter than OEM (5 divisions) It was told that there is a possibility that Spring might go wrong inside Fork.
I wanted it to make it the same free length as OEM properly if it is exclusive for a car model with a pon..
【Hope for Manufacturer - Please let me know if you have any improvement points]
Based on the above-mentioned matter, I would like you to make solid thing if it is exclusive for car model.
【Have you compared items?】
nothing special
[Others]
☆ Because there are those who are making five, Spring who came to my hand might have been Hapap, but I think that Spring's performance itself is not bad.
Although OHLINS is a cat ladder child in the world, OHLINS seems to be a product closer to Race, rather than going to Circuit, thinking that it would be the best choice if you want to run comfortably on public roads and want to improve ride comfort I will.
View detail
Gleeful difference
To be honest I did not think it was so different.
I only got on OEM's suspension
What is good or bad
There is no such value, pure curiosity and
I took with a desire to tease
Surprised to say your motorcycle seems to be not yours
Indeed I realized that the OEM did not have a hard time.
I can not return anymore
View detail
First leg reinforcement first
When traveling 40,000 kilometers, I feel that the suspension is trailing as expected. I feel a bad feeling when coming with guts at Manhole's step, Asphalt Decoration Boko, etc.. Because it is worrisome, Long touring, it is very tiring. First of all, thought to try only Oil replacement, originally ZEPHYR 750's Front saw an article that seemed to be dissatisfied in OEM state, and in fact, I also felt that way, I read Impre and bought it carefully.
I tried installing, I think that the feeling of running improved. The step is guts and no more, and the Front suspension firmly absorbs it.
Is it fun to get over it? Haha. In addition, the behavior of Motorcycle was unsteady due to lane change when traveling over 80 km, and it became a sticky feeling. This Recommendation. With the course of course, the desire to put Gold on Rear is ...
View detail
Fits: HONDA NC700S, HONDA NC700X, HONDA NC700X, HONDA NC700S
NC 700X of matching with the three friends, supposed to be around the match
Three people ordered replacement work in order
However, only my Spring was burning long
When it says, it is about 5 cm long - - -
Obviously Solidly hard when incorporated
If Color is an OEM Product, whatever Small unevenness rigidly bounces off briskly
What is Hyper pro's product management for this level - - - I will not buy it again.
View detail
Fits: HONDA NC700S, HONDA NC700X, HONDA NC700X, HONDA NC700S
I should have exchanged it faster
What is the OEM of NC 700X?.
Large satisfied with the performance of other people's reviews as expected.
There was no disagreeable thrust of guts, upgraded as well as advanced ride taste.
I'm looking forward to Long touring from now on. The cost effectiveness is excellent.
I should have exchanged it faster.
View detail
Suspended Up date
Following the exchange of Rear suspension, Front suspension also up dating.
Purchase SR400 initial disc compatible Oil attached product.
Clean with all Rose - When trying to assemble it,
Discovery that SpringLength is different.
Initial disc : Spring 445 mm + Color 75 mm = 520 mm
Hyper pro : Spring 490 mm
Although it was assembled as it is in Manual,
Spring + Color thinks Pre-road is too high, in No Color
When assembled, it can be installed with a little pre-road.
The stationary sag also becomes correct as 30 mm according to the Manual value.
The impression of trying on the ride was that the subduction was reduced to the Large width, but the thrust at the time of getting over the step was a little tight.
The attached Oil is # 20 and it is rather stiff and the damping force is high.
Scheduled to lower to # 10 to # 15 at the next Maintenance.
View detail
Front around the Front supple
In addition to the legal inspection of BuellX-1, Overhaul of Front fork is carried out. At that time we introduced this Parts. Oil leakage etc. Although there is not a mileage but also a mileage of 20,000 kilograms, since a considerable period of time has elapsed since purchase, I got overhaul to do at the Motorcycle store asking for maintenance.
After introduction, the movement of Front fork became fairly flexible and manipulating Motorcycle became more fun. Caring for Front fork and Rear suspension is also expensive as usual, but I think it was really good to do this time.
View detail
Fits: HONDA NC700S, HONDA NC750S, HONDA NC700S, HONDA NC700X, HONDA NC700X, HONDA NC750S, HONDA NC750X, HONDA NC750X
Although I have not installed it yet - - - - - -
Why the Instruction Manual is Copy (?o?) Moreover, it is hard to read Small - - - - Although the box is certainly Hyper pro, I doubt that it is really genuine. View detail
Attention to orientation?
Although it is a personal opinion,
For STREET TRIPLE, the reversal may be better.
When wearing as recommended and running a little "Kiko Kiko" And I got sounds, I felt a bit stuck in the motion.
When I took out Spring again with prediction that it was Gap while driving, I noticed that the inner diameter of the wider side was smaller by 2 mm than the narrow side, and the backlash with the Spacer was reduced It was.
(OEMSpring of SingleRate also has one side flattened. )
After running backwards, I tried running while consciously moving Fork to Large Fuji, and although I got to rub it slightly, the behavior improved, so for a while in wait - and - see.
Although it may be a common thing in the outside Spring, I think that it is a little less play.
Although it is not something that I can recommend without feeling casually considering the time and labor of installation, I like the way of talking on the road surface.
View detail
Smooth movement!
I attached it to the NC 750X.
Front fork oil Upgrading to the reputable Hyper pro Spring as it was planned to replace.
Based on the Instruction Manual and Web information challenge to replace, Oil Oil is more compact than Oil Oil surface 140 mm and OEMOil is specified on an oil level lower than this, but this feel exquisitely good.
The Front, which was not stiff enough, got a move like grabbing the road firmly.
1. I think that the value of 80,000 yen is sufficient.
Especially NC's Reduction in cost Front should be Plus.
View detail
It became a comfortable leg around.
When asking Shop who is indebted to Overhaul of Front fork, I was also encouraged to exchange Front spring. Seal OEM is also expensive so we recommend this to SKF again.
Impression running about 200 kilometers, but it seems to work well. For example, it is uneven due to the thick paint just before the Curve, but until now the vibration comes directly to the Handlebar, but the vibration transmitted to the Handlebar has decreased by the amount of absorption increased. Is it supposed to be able to use until the end of Tire 5 mm left?. Because it was about 1 cm in front. There is no reason why his Kill suddenly rose, so I thought it was the effect of Spring. Seal also SKF and Rear Suspension both exchanged for Vitubo, so it is not an effect of Front. Just Stroke seems to have increased. This Fork does not have Adjust skills, but it is enough for myself without exchanging it with an expensive Fork.
View detail
In ZEPHYR
When I added OHLINS to Rear suspension, bad movements of Front suspension appeared remarkably, so I exchanged Spring at the same time with Oil. Since RS has no choice, I bought this item, but I think that the impression after the exchange is made by making Oil a solid one, but obviously the subduction becomes less and it gets easier to ride than at the time of OEM It was.
It was nice to change..
View detail
It is as it is truly stated as The emergency Motorcycle all vehicle is equipped with the Spring of a Hyper pro in the headquarters Netherlands of a Hyper-pro company, and a feel is dramatically good. Intelligible explanation at which the Setting manual o
It is as it is truly stated as The emergency Motorcycle all vehicle is equipped with the Spring of a Hyper pro in the headquarters Netherlands of a Hyper-pro company, and a feel is dramatically good.
Intelligible explanation at which the Setting manual of the
Suspension had also arrived is given.
Although it is the touch which finishes work within a Stroke of an about with less [ 30% ] Normal suspension even if it carries out a Sports run, since the movement toward the
Fork does not give hardness, its waiting riding is also dramatically easy.
View detail
Fits: HONDA CB400SF VTEC 3, HONDA CB400SF REVO, HONDA CB400SB
Since the Front fork of a NORMAL has become too much deplorable and the Balance had worsened when changing the Rear suspension of CB400SB into the external article (YSS G366), the Front spring of the Hyper pro was used. If it worried about whether it bec
Since the Front fork of a NORMAL has become too much deplorable and the Balance had worsened when changing the Rear suspension of CB400SB into the external article (YSS G366), the Front spring of the Hyper pro was used.
If it worried about whether it becomes a Solidly since the viscosity of the Fork oil of
attachment was harder, but it runs Although it is hard, it is an agreeable impression with pliant wonderful feeling.,
A degree of comfort is unsuitable for the person of liking [ フワフワ ] like the
Rear suspension.
I think that it is common that it is hard as for a Sports Suspension.
(Circuit specification being another again)
View detail