Genuine K&N Air Filter for Suzuki GSX650F 2011

This GSX650F came in for a service which included air filter, oil filter and oil change. I decided to go for the K&N filter over the OEM one because you also have the ability to wash, re-oil and re-use these filters. I have never found them to be anything less than the quality of the standard OEM filters and do not have any less performance. As I said, these are reusable if you do it all correctly. This is replacing the OEM Suzuki one which came on the bike when the customer dropped it off. By the looks of it, it has rarely been changed. I dispair how some people manage to run bikes without the slightest notion of maintenance. Finding the correct filter for this bike was easy too, I checked on Webike website and this showed the models that fit each filter. Really easy. I had other items in my order and this then cut down the shipping over the entire order. I use EMS fast service which arrived at my door in 5 days. All the items were packaged really well and bubble wrap and air pockets were used to fill any space in the box. Webike even tape the outer box on all sides so nothing can get in or out. The filter arrived in perfect condition and did come pre-oiled which is also nice so you do not have to mess around the first time. Fitted in about half an hour total. The final result was perfect. A nice clean well oiled air filter ready for a few thousand miles to come. Thanks to Webike for doing a great job and providing a great service throughout. View detail

Genuine Yamaha Pipe 4 for FZ1 2008

This was another pipe that needed replacing on the FZ1 which was looking a little tired with rusty pipes. The pipe 4 was not hard to find as I used the tools Webike provide on their help pages and then cross referenced with Yamaha schematics for my own peace of mind. The pipe 4 is one on the outer side so it does get a lot of road debris and rain so it was only a matter of time really. The pipe 4 was very good value and a lot cheaper than my local Yamaha dealer could sell for. With the other parts in this project in the same order, it was all delivered by EMS and took 5 days to arrive. The pipe was well packaged and surrounded by bubble wrap to keep it safe. The pipe itself is well made and is finished off in satin black Yamaha paint which is flawless. All the pipe ends are perfect with no damage. I did order all the accompnying o-rings and rubber pipes too and now I just have to put it all back together. Nice work Webike, thank you. View detail

Genuine Kitaco Exhaust Gasket for NSR250R

These were purchased due to changing the exhaust too many times in the past and the gaskets were not doing as they should. The correct part was found by simply searching the model of bike and the Kitaco gaskets came up in the search. As these have had good reviews, I decided that I would give these a try myself for this exhaust change. They gaskets were pretty good value and yes, they are only gaskets but they do need to be right. With some other parts in my order, I got them all shipped using EMS. The order arrived in 5 days from being shipped which is perfect. The gaskets came in the Kitaco standard packaging for this item and were well packaged. The gaskets themselves look to be really good quality and there were ne signs of any problems with the size or condition. Absolutely perfect fit and not a leak in sight. Very impressed with these gaskets and Kitaco is going to be one of my go to brands from now on. Great work Webike. Keep it up. View detail

KITACO Speed Pulse Conversion Unit (Installed on JC92 U.S. Spec.)

About quality and texture - Quality is ok. Difficulty of installation - Installation was easy. About shipping and packaging - Well packed and secured. Any concerns, cautions, or advice when purchasing - Only concern i had was getting to the setting mode and i couldn't get it to power up. On instruction manual the Optional Connector is actually what powers up the device to get to setting mode. My grom is purchased in the U.S. it may be different with the Japan spec. as i couldn't find the power supply connector harness on my bike. I was able to just tap the power supply through the rear lighting and got it to power up and set up to my bike specs. View detail

KITACO Shock Absorber

About quality and texture - As always Kitaco products are very well made with great craftsmanship. About the feeling of use - Rides so much better from stock. My old shock were too soft and the kitaco shock is much stiffer and adjustable. Difficulty of installation - Installation is easy for me as i have the proper tools and equipment. Cost performance and comparison with other products - very affordable About shipping and packaging - shipping option was only fedex but i will not complain, as i had other ordered items that came along with it. I received my products in just a few days. View detail

MR-A8S

My friend was worried about thread protection in the consoles of his SUPER CUB CUSTOM, I offered him these spacers. As expected, there are no complaints about the product, the installation went without problems, everyone was satisfied. If you are thinking about protecting the threads in the remote control and placing some additional equipment (windshield, phone fasteners or additional light), this is an excellent solution. View detail

KITACO Axle Protector Set (color black)

About quality and texture - Build quality is always top notch with Kitaco. Great craftsmanship always. Difficulty of installation - Installation is very straight forward and easy, just slide axles out and install with provided washers. Cost performance and comparison with other products - Very affordable. About shipping and packaging - Packaging is well packed and secured. View detail

ca1374

We need to retrofit my friend's SUPER CUB CUSTOM with the necessary spare parts that will positively affect the operation of the equipment over time. One of the main things is to protect the internal parts of the engine from small chips (which are formed during engine operation). This plug is the optimal solution to this issue. View detail

HA-1042

When servicing my friend's SUPER CUB CUSTOM, it turned out that his air filter had fallen into disrepair. Based on our experience, we ordered this filter and everything went fine. The filter is perfectly in place, the quality of the materials is as always on top. If you need a filter for such a motorcycle, I recommend buying it. View detail

I like my second purchase

I think I received it in 10 days. I like it.

The packaging was neat, and I had previously purchased heat titanium, but it was difficult to maintain, so I purchased the stain one.

I am very satisfied. lol

However, after ordering and coming from Japan to Korea, it took a long time at customs. Please note. --------------------------------- ------------------------- I think I received it in 10 days. I like it. The packaging was neat, and I had previously purchased heat titanium, but it was difficult to maintain, so I purchased the stain one. I am very satisfied. lol However, after ordering and coming from Japan to Korea, it took a long time at customs. Please note. Powered by Google Translator View detail

unique quality products

I bought this years ago. I love the clean and simple look of the handlebars. I shortened the length a little. I had a little accident. The bracket was broken, I repaired it by welding. That's why it started to rust. I love the way it looks. The mirror is very easy to use, the viewing angle is sufficient. I disassembled the fork for oil change, I will clean the rusty. I will buy another one again for my Xs 650 project. I definitely recommend it. View detail

SP TAKEGAWA Meter Protection Film

About quality and texture - The product quality is great. About the feeling of use - Texture is sleek and smooth, almost feel like glass but its just a film. Difficulty of installation - Very easy install. I was very suprise when I installed the film because my meter display was full of scractches/swirls marks and after installation, I was shocked to findout that it literrally hides the scratch/swirl marks i had on my meter display. Just look at the images i provided, my meter looks brand new. View detail

RCH-01

The rubber band of the gearshift foot is cracked on my Honda Monkey. To restore the appearance and functionality (so as not to spoil the shoes when interacting with metal) I purchased this rubber band. I had to trim the edges a little to give the original shape, but overall everything went fine. View detail

C17Z9990010ZZ

I'm used to using the emergency light in the car (blinking all the turns) to attract attention, to say "thank you" and so on. I miss this feature on my Honda Little Cub. I purchased this button to eliminate this "injustice". I haven't installed the button yet, but everything is fine in terms of material and workmanship!!! View detail

ca1374

My friend found out that I have bolts with a magnet on all my equipment to collect chips from the engine cavity. He asked to buy this bolt for him on a HONDA SOLO, too. Upon arrival, he handled the installation himself and he really liked the quality of the material!!! View detail

C7HSA

We are bringing my friend's SUPER CUB CUSTOM back to normal. We replace consumables, including the glow plug. We take only time-tested spare parts. In terms of quality, everything is on top, without complaints. The engine started working like a Swiss Watch. View detail

7624

A friend of mine bought such a footrest and I also wanted to put it on my Honda Monkey. I liked this footrest in appearance, workmanship and material. I think that with the optimal height of the footrest, adjusting the height of the lift is superfluous (but this is relevant for the stock height). There were no problems with the installation, the only thing that my model has an engine lock, but the manufacturer took care of it (the Product # 5550 decoy is purchased separately). View detail

5550

I purchased a footrest (Product # 7624) for my Honda Monkey, but my model has an engine lock when driving with the footrest not removed. To bypass this blocking, I needed a decoy. I am very pleased that the manufacturer took care of this problem!!! I had to work hard with the installation (this is due to the difficulties of getting to the connector), but everything was successful. As a result, it works great! I am very satisfied!!! View detail

W-1741-058

I really liked how these nuts transformed my Honda Monkey and I decided to repeat this with my Honda Little Cub. The nuts fit perfectly except for two washers (the stem on the Honda Little Cub turned out to be wider behind the thread), I had to leave two washers old on the inside. I liked this purchase, I was satisfied with the experiment. As always, the products of this company are on top!!! View detail

Best shocks

I recommend it because it has much better ballast than the stock rear shock and looks even cooler.About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail