Reviews
Fits: KAWASAKI ELIMINATOR 250V, KAWASAKI ELIMINATOR 250V, HONDA SLR650 VIGOR, HONDA NX650DOMINATOR, HONDA NX650DOMINATOR, HONDA NX650DOMINATOR
Successor ProductNo
Since this vehicle was a reverse import car originally did not have a Front sprocket fitting to the vehicle originally, as a result of various searches on the Net, it turned out that the sister cars fit, ordered but that product was out of production! The successor model which contacted Manufacturer I ordered by saying that it is out. OEM has 30,000 kilograms so I'm looking forward to this item.
View detail
Fits: KAWASAKI VERSYS(KLE)650, KAWASAKI VERSYS(KLE)650 ABS, SUZUKI DL650 V-STROM, KAWASAKI W800 STREET CAFE, APRILIA RS250, SUZUKI GS500E, KAWASAKI VULCAN(EN)650S SE, KAWASAKI Z650, KAWASAKI Z650 ABS, SUZUKI SV400N, SUZUKI SV400S, SUZUKI SV400, SUZUKI ST400 TEMPTER, SUZUKI SAVAGE400(LS400), SUZUKI INAZUMA400, SUZUKI GSX400 INAZUMA, SUZUKI GSR400, SUZUKI GS400E, SUZUKI GLADIUS400, SUZUKI DESPERADO400X
After I bought R1-Z at second hand, I decided to replace the front and rear sprockets and chain when the travel distance exceeded over 10,000km.I was worried that it might be hard to remove the original sprocket, but the job wasn't that troublesome af
After I bought R1-Z at second hand, I decided to replace the front and rear sprockets and chain when the travel distance exceeded over 10,000km.
I was worried that it might be hard to remove the original sprocket, but the job wasn't that troublesome after using a gas torch, CRC (anti-rust lubricant), and a spinner handle.
I also exchanged the lock washer and nut, and changed to 13T from 14T to improve the acceleration performance.
I think it actually has become better.
The maximum speed should have fallen, but I don't mind, for I don't drive in such high speed. I think it was a good choice.
View detail
The travel distance is going to exceed 40,000km. So I decided to replace the front sprocket, along with the rear sprocket and chain.I really wanted to have a SUNSTAR one just like the rear, but chose this XAM one instead, for I couldn't find it in
The travel distance is going to exceed 40,000km.
So I decided to replace the front sprocket, along with the rear sprocket and chain.
I really wanted to have a SUNSTAR one just like the rear, but chose this XAM one instead, for I couldn't find it in their product lineup.
Model C4413-15 is for Z750S, but it seems that it could be used for Z800 too.
I asked the workshop to install this product, and it was a good choice.
The tightening nut of the OEM front sprocket is tightened extremely hard, and workshop staffs had trouble taking it off. First they used an impact wrench with no success. They had to try things like scorching it with a burner or banging it with a hammer to do the job.
The new sprocket itself doesn't look that different from the original one. And its performance is still unknown!!
View detail
Fits: SUZUKI GS125, SUZUKI GN125H/F/2F, SUZUKI GN125, SUZUKI EN125
It exchanged in order to increase the number of teeth of the Front sprocket of GN125H.Although afflicted by the hardness of fixed Nut, etc., the ease of riding after exchanging is wonderful.I think that the goods themselves have improved and there
It exchanged in order to increase the number of teeth of the Front sprocket of GN125H.Although afflicted by the hardness of
fixed Nut, etc., the ease of riding after exchanging is wonderful.I think that the
goods themselves have improved and there is no dissatisfied point.
View detail
Fits: HONDA MAGNA(V-TWIN MAGNA), HONDA HORNET250, HONDA XELVIS, HONDA JADE, HONDA VTZ250, HONDA VTR250, HONDA VTR-F, HONDA NM4-02, HONDA NM4-01, HONDA NC750S, HONDA NC750S, HONDA NC700X, HONDA NC700X, HONDA NC700X, HONDA NC700S, HONDA INTEGRA DCT(for International Model), HONDA CTX700N DualClutchTransmission, HONDA CTX700N, HONDA CTX700, HONDA CTX700
[Webike Monitor] It has just changed.If attachment has a tool and knowledge, it is easy.Although distance is not running, it does not still seem to have a problem.
[Webike Monitor] It has just changed.If attachment has a tool and knowledge, it is easy.Although distance is not running, it does not still seem to have a problem. View detail
Probably, about a Sprocket, it will be infallible. All also of a friend or an acquaintance are used. And in WEBIKE, it can be hard to purchase quite at a low price.
Probably, about a Sprocket, it will be infallible. All also of a friend or an acquaintance are used. And in WEBIKE, it can be hard to purchase quite at a low price. View detail
Although purchased with 14.15.16 until now, that the problem cropped up is the kana ? grade that a form is different for a while, even if compared with an Afam as the w Title not existing. Although changed into 520 from 525, there is
Although purchased with 14.15.16 until now, that the problem cropped up is the kana ?
grade that a form is different for a while, even if compared with an Afam as the w
Title not existing.
Although changed into 520 from
525, there is no problem.
I am allowed to use it in comfort.
View detail
The maximum high speed is one needed to a slight degree, F12T, and R44T, since they call it even number, they are F13T, and it is the cheapest. It is exchange at the Sprocket of XAM (XAM). exchange is very easy, and it only removes and replaces
The maximum high speed is one needed to a slight degree, F12T, and R44T, since they call it even number, they are F13T, and it is the cheapest. It is exchange at the Sprocket of XAM (XAM).
exchange is very easy, and it only removes and replaces a Snap ring.
Since Aprilia RS50 has a kind not only by a model but by a specification country, the
notes are cautions! Since the shaft diameter and threads per inch which put in the
Sprocket differ from each other, please place an order after checking by the present vehicle.
Incidentally those [ one's ] was ten mountains!
The Torque became that RS50 in which the touch which rode does not have a low-speed Torque from the first although the maximum high speed was extended from former does not still have less.
if it always puts into the
Power band, it will not become pain so much!
-- already -- although he would like to raise 1T, I think that town riding is hard with not carrying out a Bore up.
View detail
Although form differs that it is pure, he has no problems, such as attachment. The check of durability has room for improvement.
Although form differs that it is pure, he has no problems, such as attachment.
The check of
durability has room for improvement.
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1200, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-14R, KAWASAKI ZX-12R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ750R
Since quality is dramatically high, this product is immediately known by appearance. It is better to use the goods here, although it is somewhat expensive if a burden is put on a Motorcycle using the product since it is crude and also there are vari
Since quality is dramatically high, this product is immediately known by appearance.
It is better to use the goods here, although it is somewhat expensive if a burden is put on a Motorcycle using the product since it is crude and also there are various company goods.
Since
durability is also high, it excels in the Cost performance as a result.
Sprocket exchange is the goods recommendation here.
View detail
Although the Sprocket of XAM is value for a while from other Manufacturers, I think that a problem does not have the Rear sprocket used in the past in quality, either, and it is excellent in a Cost performance. Especially, it could equip also with t
Although the Sprocket of XAM is value for a while from other Manufacturers, I think that a problem does not have the Rear sprocket used in the past in quality, either, and it is excellent in a Cost performance.
Especially, it could equip also with this object for Fronts satisfactorily, and has satisfied it.
View detail
As for the Sprocket, themselveses and friends are using XAM and Origin AFAM mostly. Since he bought it at a low price than another place, it was good.
As for the Sprocket, themselveses and friends are using XAM and Origin AFAM mostly.
Since he bought it at a low price than
another place, it was good.
View detail
Fits: HUSQVARNA WR125, HUSQVARNA 125CR, HUSQVARNA 125CR, HUSQVARNA 125CR, HUSQVARNA 125CR, BETA ALP200, APRILIA TUAREG 125 Wind AE, APRILIA RX125, APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA RED ROSE 125, APRILIA PEGASO 125 RALLY, APRILIA PEGASO 125, APRILIA FUTURA 125 EUROPA, APRILIA EXT125, APRILIA CLIMBER240, APRILIA AF-1 SINTESI/REPLICA, APRILIA AF-1 125/F40
Since it was a Front, it was a place which is not visible, but it was not the Type with which meat omission of a hole like a photograph is carried out. Since it was [ attachment / , however ] satisfactory, it just said that it was in general good.
Since it was a Front, it was a place which is not visible, but it was not the Type with which meat omission of a hole like a photograph is carried out.
Since it was [ attachment /
, however ] satisfactory, it just said that it was in general good.
View detail
Fits: SUZUKI VOLTY, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI INTRUDER250, SUZUKI DR400
14 dishes were purchased to one-dish lowering of VOLTY. Although it was Brando who does not know until now [ ], they are very honest goods. He bought it and it was a correct answer. Since it had hit the inferior goods of AFAM in fact, they are
14 dishes were purchased to one-dish lowering of VOLTY.
Although it was Brando who does not know until now [
], they are very honest goods.
He bought it and it was a correct answer.
Since it had hit the inferior goods of AFAM in fact, they are the goods which understood that there was a thing good also for the Manufacturer which is not famous.
View detail
Fits: SUZUKI GS125, SUZUKI GN125H/F/2F, SUZUKI GN125, SUZUKI EN125
"Since engine braking is effective too much and it was hard to ride in the normal front sprocket 14T of Chinese-made Suzuki GN125H, I exchanged XAM front sprocket 15T. After exchanging to XAM front sprocket 15T, engine braking becomes quiet and quite easy
"Since engine braking is effective too much and it was hard to ride in the normal front sprocket 14T of Chinese-made Suzuki GN125H, I exchanged XAM front sprocket 15T. After exchanging to XAM front sprocket 15T, engine braking becomes quiet and quite easy to ride! With it, about 500 rpm of engine rotations also became low by each gear, I could run calmly and fuel consumption also became good! Although I ran about 1000 km, durability does not have a problem, either and it can be recommend for who ride on Chinese-made Suzuki GN125H!" View detail
Fits: YAMAHA DIVERSION600, YAMAHA DIVERSION400, YAMAHA XJR400, YAMAHA XJR400R, YAMAHA TT600
The front was chosen as this manufacturer at the time of three-point set exchange. Although there was no hole like the image, since it was not a part which is seen, I think it is ok. As for performance... Although I'm not sure about a quality judgment, if
The front was chosen as this manufacturer at the time of three-point set exchange. Although there was no hole like the image, since it was not a part which is seen, I think it is ok. As for performance... Although I'm not sure about a quality judgment, if a rear and chain are exchanged, I consider that it is better to exchange three sets simultaneously. View detail
Fits: SUZUKI VOLTY, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI INTRUDER250, SUZUKI DR400
[a webike Monitor] -- three companies of prices which the meat omission lightweight Type was thought and it purchased unlike the SUNSTAR and the Afam by the picture, but were an ordinary Type are almost the same, and the rest cannot be durability -- ? --
[a webike Monitor] -- three companies of prices which the meat omission lightweight Type was thought and it purchased unlike the SUNSTAR and the Afam by the picture, but were an ordinary Type are almost the same, and the rest cannot be durability -- ? -- since this was not understood unless it used it, it was set to *3. View detail
Fits: SUZUKI XF650 XF650 FREEWIND, SUZUKI DR800 , SUZUKI DR650 SE
[Webike Monitor] working accuracy etc. have been attached especially satisfactorily. It is gratitude that there are a product of this vehicle type and stock!
[Webike Monitor]
working accuracy etc. have been attached especially satisfactorily.
It is gratitude that there are a product of this vehicle type and stock!
View detail