Reviews
It would be useful to have when pinching round objects with Vise
I had only had a Mini Vice until now, but when I needed to do some welding, I bought a medium sized Vise. I bought it because I thought it would be useful.
I wish the material was sized to fit the groove of this product, but it is a little difficult to use when the angle is not right. Also, this product has a strong magnet that sticks to the vise, but it is a little troublesome to use it after aligning the teeth of the upper and lower jaw because the teeth of the upper and lower jaw seem to be misaligned and the tooth sides are not aligned properly.
So, it is not suitable for all purposes, but there will be several times in a lifetime when it would be very convenient to have it. The color is Kawasaki green, which I personally like, but there is no Kawasaki motorcycle at the moment, so I am not sure.
View detail
![Lightweight Flywheel [Stock Modified]](https://img.webike-cdn.net/catalogue/images/122501/07021926_5b39fdde38e85_TS.jpg)
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G
steering wheel
This product has a lower weight than the stock steering wheel, which allows for greater motorcycle performance. The park received it in excellent condition, although the packaging was torn as if the piece had been unpacked before, although the product was in excellent condition. View detail
fender eliminator
I received the package in very good condition, both on the outside of the packaging and on the inside, well protected and on the agreed date. The bike takes on a better street style, since with this fender eliminator you can better see the rear rubber View detail
Nice windscreen..completes the look of the new katana
Good looking and proper fitting windscreen For the new katana. I think it looks way better than the small original screen. it even helps a bit at highway speeds Up to 120kmph.or 70mph. View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z1000, KAWASAKI Ninja1000SX, KAWASAKI VERSYS 1000
Replacement is easy.
ninja1000 is a Quantity:Pair (for Left and Right) Remove the Upper Cowl of the BoltQuantity before Tank:Remove the 2pcs and lift it up to reveal the air cleaner box. Next, remove the screws around the box with a Phillips screwdriver and remove the lid to replace the air filter. This filter is just fit like the OEM one. View detail
It looks like it will fit in the stated capacity.
2.The product is up to 5L, but it seemed like a Limit at about 2.3L.
It's in there with no problem, so it's supposed to be in there as described.
It's much easier to dispose of than the previous Dan Ball box was.
View detail
Fits: KAWASAKI ZZR1100 D, KAWASAKI ZZR1100 C, KAWASAKI ZX-10, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI GPZ1100 , KAWASAKI GPZ1000 RX
Black will not fit without shaving due to the thickness of the surface treatment.
I cleaned up the cist Shaft with Paper but it was too tight to fit, so I had to rub the Bearing Inner Ring with Paperetc. a lot to get it in, although not enough to drop the Plating.
The reason may be the thickness of the plating, since I purchased it in black, but after inserting it into the Shift shaft, it turned smoothly, so it may be due to a slight thickening and deformation of the splined area near the shaft due to processing distortion.
The bearing was also reluctant to move, but after placing it in the shift shaft, it rotated smoothly, so I decided that the bearing would rarely rotate and assembled it as it was.
It would be nice if the price was a little lower.
View detail
Size is Exactly
The Size is Exactly and does not flap. It withstood a typhoon by tying up. It is also easy to lock.
Consumables, so they need to be replaced regularly.
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
White stands out.
It will be Accent on Black tasteless Smart key.
It's also good that you can't mistake it for a spare key!
View detail
Fits: YAMAHA DRAG STAR 400, YAMAHA DRAG STAR250, YAMAHA MAXAM, YAMAHA SR400
I am satisfied with the design and price.
Installed on SR400Final edition.
I liked the design of the OEM Mirror, but I had trouble with the narrow field of view, the angle of the Mirror was difficult to adjust, and the installation screws were loose, causing the Mirror to rotate downward while driving. After installing this product, the screws no longer come loose and the angle can be adjusted in a wide range of motion, so I have good visibility.
I like the Square Type design, which looks like early SR.
One drawback is that while it is easy to adjust the angle, the angle changes with the weight of the cover, so it needs to be adjusted each time before running.
The price is reasonable and overall satisfaction is high.
View detail
Barang sesuai pesanan hanya saja segel terbuka terima kasih View detail
Exhaust System first replacement
I ordered this for my CA45A LETS4 because I had a cracked Pipe at the root. Tighten the Bolt and tighten the back Quantity:The 2pc holes were Bolt in while pushing and pressing the Exhaust SystemBody to align the holes.
The noise of the Exhaust System is quieter than before the previous OEM Exhaust System was broken, so it can be used on public roads and residential areas without any problems.
View detail
Almost perfect except for the price.
The front and rear stands seem to be the best in a certain manufacturer, but this product is sufficient for cleaning and simple maintenance at the Amateur level.
However, the price could be lower, so the rating was not a perfect score.
View detail
Fits: Others Universal, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUBC125, HONDA CROSS CUB50, HONDA BENLY50, HONDA BENLY50110, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA LEAD50, HONDA LEAD 90, HONDA LEAD 100, HONDA LEAD110, HONDA LEADEX, HONDA APE 50, HONDA APE 100, HONDA DIOCesta, HONDA XR50 MOTARD, HONDA XR100MOTARD
Exactly to MONKEYGROM
It is Exactly for 125cc Minimoto. It is thick, waterproof, and will not fade. It is quick to hang, and the center clip prevents flapping, even in strong winds.
The holes for locks on the front and back are also well and not frayed.
The black color is inconspicuous at night and plays a role in security.
View detail
After 10,000 km
Purchased due to Idling failure. It has been improved. View detail
Brake Pads Replacement
I used VesrahResin pad for the first time and it worked well enough for city driving and touring. Although the mileage is still low, the brake squeal has stopped. I would like to check the effectiveness and the aggressiveness to the rotor in the future.
If the results are good, we would like to continue using it.
View detail
It seems to be more durable than OEM.
It was firmer than OEM and seemed more durable.
Since these are completely self-satisfied Parts, there is little need to replace them unless the OEM Mud Guard runs out or something, but I replaced them out of self-satisfaction.
View detail
Meter visor installation
With the right tools, it was not too difficult to install. Maybe a larger size would be better for wind protection. View detail
It was just like the image.
I have just purchased a DDR−S100 with KAMUI3 for the purpose of fixing the Wiring to operate it as a HelmetCamera.
My DDR−S100 was modified to be able to cut the cord in the middle and connect it with Waterproof Coupler after the USB cord was disconnected. The third image shows the Helmet side. By connecting the other side of the cord connected to the Mobile Battery to this side, the cord does not get in the way when attaching and detaching the Helmet.
This time, when I use KAMUI3 for motorcycle commuting, I thought it would be better to have a DriveRecorder, so I decided to install DR−S100 on my helmet, and selected this product as just the right one to fix the Power Cord.
This 3mm TubeHolder was not bad looking and had just the right diameter to move it a bit against the thickness of the Wiring.
I have used 5mm diameter ones in the past, but they can also be cut and used, and I think they are quite user-friendly Parts. However, the adhesive strength is not very strong, so you need to be careful where you apply it. If it comes off, I will reapply with a stronger double-sided tape.
View detail
Improvement in fastening area.
The Protector is not too assertive like other Gloves, so it is Refreshing in terms of design, and the fit is good.
The length of the Magic tape to fasten is too short, so it is difficult to fasten.
View detail