Reviews
Although it is used for XR250 (MD30), and it is hard to see by vibration by the mirror of the other company, only why or this mirror is legible for vibration seldom blurring. Incidentally it is the 2nd purchase in this time.
Although it is used for XR250 (MD30), and it is hard to see by vibration by the mirror of the other company, only why or this mirror is legible for vibration seldom blurring.
Incidentally it is the 2nd purchase in this time.
View detail
XR250 (MD30) is equipped. The number of the reasons which came to choose this is four. When a friend encounters an accident in the state of a normal mirror and is given up ahead before, in the attachment part (portion of ball state) of a mirror, t
XR250 (MD30) is equipped.
The number of the reasons which came to choose this is four.
When a friend encounters an accident in the state of a normal mirror and is given up ahead before, in the attachment part (portion of ball state) of a mirror, the first point should tear the thigh and should be sent to hospital half a year.
Therefore, falling on an emergency is an indispensable condition.
The second point is liking to use a convex mirror, in order to earn a back visual field, although it is a favorite problem.
(The thing of a DRC company is a plane mirror) The third point should not interfere in an arm at the time of standing.
The fourth point is that the mirror always vibrated, the back check carried out for too much lightness, and it was hot (it is -- whether it has been improved now) when a trial mirror was used a long time ago.
Moreover, the thing for which a fixing position will be remarkably restricted if it needed to clamp independently for the handle in the case of the mirror and has attached to the narrower handle to the armor handguard (although it is about 15 mm --).
Although I think that it is the product which was able to improve generally, there are three faults.
The first point is a little heavy thing.
The second point is that the angle of a mirror changes at about 100 km/h, if the screw of a mirror tooth-back part is not tightened very firmly.
The third point is that will adhere to if the angle of the root of a mirror (Bar) sometimes is not changed, and the joint of the base becomes foolish with a little impact.
(In our example, when not having carried out angle adjustment in about one year, it generated) Since a fault is also clear although the passing mark is reached, it is evaluation of four stars.
View detail
Although folding is possible, and a mirror is also large and easy-to-use, the wax after a car wash will be cost and it will fall at the speed of about 80 K after it. Although it had written on notes, and is a solution and was, too, its own car likes a
Although folding is possible, and a mirror is also large and easy-to-use, the wax after a car wash will be cost and it will fall at the speed of about 80 K after it.
Although it had written on notes, and is a solution and was, too, its own car likes a polished and will always wax too much.
View detail
Although the normal mirror was preeminent for visibility, in order to take many car width, it changed into this mirror. too, in the motorcycle of this system, affinity with a round mirror appears perfectly, and thinks that a price is also handy on it.
Although the normal mirror was preeminent for visibility, in order to take many car width, it changed into this mirror.
too, in the motorcycle of this system, affinity with a round mirror appears perfectly, and thinks that a price is also handy on it.
A moving part is not solid, either, and it does not necessarily shift during a run, and can also fully secure a visual field.
It is one recommended article.
View detail
Since there were many path-through-a-wood runs, it attached here. A field of view is also satisfactory and the sag of an arm is effective. However, if the bending part is folded up repeatedly, it is likely to loosen before long. It is a place
Since there were many path-through-a-wood runs, it attached here.
A field of view is also satisfactory and the sag of an arm is effective.
However, if the bending part is folded up repeatedly, it is likely to loosen before long.
It is a place where that of ? which increases and cannot do a bundle is regrettable.
View detail
Even if it falls unlike a pure stationary type, in order for the root of a mirror to bend, it is not necessary to damage a mirror. In an off vehicle, it is this. Since the price was also handy, it exchanged and was a correct answer.
Even if it falls unlike a pure stationary type, in order for the root of a mirror to bend, it is not necessary to damage a mirror.
In an off vehicle, it is this.
Since the price was also handy, it exchanged and was a correct answer.
View detail
It purchased on the lefts of the serow. Since an authentic positive one broke, the left was nothing and it had ridden, but town riding is inconvenient if there are no right and left too. From now on, it is not anxious about slash change.
It purchased on the lefts of the serow.
Since an authentic positive one broke, the left was nothing and it had ridden, but town riding is inconvenient if there are no right and left too.
From now on, it is not anxious about slash change.
View detail
Since path-through-a-wood touring was carried out by the serow, it exchanged from an authentic positive one. Time was taken in adjustment of attachment for a while. Since it is smallish after all and the range to which it is reflected is narrow, w
Since path-through-a-wood touring was carried out by the serow, it exchanged from an authentic positive one.
Time was taken in adjustment of attachment for a while.
Since it is smallish after all and the range to which it is reflected is narrow, we do not recommend it to town riding Mayne's person.
View detail
It is attachment by both right and left. It is not worrisome, if it gets used although it is harder to see than a normal mirror. Since it is left-hand side, it is pushing down and running in many cases except the time of pavement road running.
It is attachment by both right and left.
It is not worrisome, if it gets used although it is harder to see than a normal mirror.
Since it is left-hand side, it is pushing down and running in many cases except the time of pavement road running.
It will fall, if you forget to push down once in fact and it is running, and stay has broken.
If a beaten spot is bad though natural, does it break also with a movable mirror?
View detail
It is attachment by both right and left. Although left-hand side has much time of having pushed down freely at dirt, at least the time of assailing Yabu etc. with questions is pushed down here. Although it is a fault that a moving part merely loos
It is attachment by both right and left.
Although left-hand side has much time of having pushed down freely at dirt, at least the time of assailing Yabu etc. with questions is pushed down here.
Although it is a fault that a moving part merely loosens by vibration, since it is harder to loosen than the product of the other company, the point is a plus point.
View detail
Since the push lump was completed from the fitting bolt portion, this product was chosen. On the unpaved way, the mirror was caught in a tree or grass and it had always hit at the time of a fall. If a mirror is only damaged, it is Massey, but cons
Since the push lump was completed from the fitting bolt portion, this product was chosen.
On the unpaved way, the mirror was caught in a tree or grass and it had always hit at the time of a fall.
If a mirror is only damaged, it is Massey, but considering that a mirror holder portion is damaged and a clutch lever and a brake lever are affected, a push lump of a mirror is running an unpaved way with safe material.
Moreover, I feel that it compared pure, and handle operation became light since it was lightweight.
View detail
the lightness which cuts 200 g -- the sag of stay -- appearance -- good. A specular surface is also reflected finely, storage is also good, and when passing through, it can carry out single hand quickly. However, dirt and of 120 K or more when hig
the lightness which cuts 200 g -- the sag of stay -- appearance -- good.
A specular surface is also reflected finely, storage is also good, and when passing through, it can carry out single hand quickly.
However, dirt and of 120 K or more when high-speed, if it does not bind tight somewhat more firmly, it will keep that an angle comes.
View detail
It purchases together with all of right and left. since a position can bring inside rather than a pure mirror -- a narrow place -- a passage -- easy -- it became. Since the moving part also fastened strongly, it does not blur during a run. If
It purchases together with all of right and left.
since a position can bring inside rather than a pure mirror -- a narrow place -- a passage -- easy -- it became.
Since the moving part also fastened strongly, it does not blur during a run.
If high speed movement is carried out, a position will blur truly, but since it does not fly fundamentally to there, he has no problem.
It became [ whether the layout of stay is good, and ] smart when pure.
It was good to buy it.
View detail
A moving part is awfully loose. It will blur a little during a run. A low location has a mirror rather than having imagined. Although the three points were considered as the minus point, an off-road mirror is cool too. He has no looks UP m
A moving part is awfully loose.
It will blur a little during a run.
A low location has a mirror rather than having imagined.
Although the three points were considered as the minus point, an off-road mirror is cool too.
He has no looks UP mistake.
View detail
It attached to SEROW 250. A specular surface blurs in vibration and visibility is bad depending on speed. I think that a next field of view is securable if there is height to a slight degree. That it is foldable although not reached distantly
It attached to SEROW 250.
A specular surface blurs in vibration and visibility is bad depending on speed.
I think that a next field of view is securable if there is height to a slight degree.
That it is foldable although not reached distantly pure uses only, and the function as a mirror is the greatest advantage.
View detail
It purchased by a right-and-left set, and attached to the honda silk road. The reason for having chosen this mirror is because it is so narrow that the entrance of the car barn which is keeping the motorcycle pries a handle and goes in and out. Si
It purchased by a right-and-left set, and attached to the honda silk road.
The reason for having chosen this mirror is because it is so narrow that the entrance of the car barn which is keeping the motorcycle pries a handle and goes in and out.
Since it moves from a root in a mirror, it can adjust to the original location easily.
This point is satisfactory.
Although the blur under run is tolerable, there being projection of an arm and the thing whose height is somewhat low worry me.
I thought if 2 or 3 more cm of stay excels.
View detail
Kawasaki Since a right screw will be 8 mm, the attachment to the sherpa who attached by the super sherpa. Be careful. Since we who also have an 8-mm lineup did not want to use an adapters for a takatsu, I placed an order for 8 mm. Although it had not
Kawasaki Since a right screw will be 8 mm, the attachment to the sherpa who attached by the super sherpa.
Be careful. Since we who also have an 8-mm lineup did not want to use an adapters for a takatsu, I placed an order for 8 mm. Although it had not fallen over yet, since there was no fear of a mirror breaking with this, I felt easy. It is recommended.
View detail
It attached to SEROW250. The retractable type was chosen according to the situation in the damage prevention at the time of a fall, or a garage. It compares pure and the point in which delicate adjustment is possible is pleasing. Since right-h
It attached to SEROW250.
The retractable type was chosen according to the situation in the damage prevention at the time of a fall, or a garage.
It compares pure and the point in which delicate adjustment is possible is pleasing.
Since right-hand side had become a reverse screw in the case of the yamaha vehicle, when he bought a general-purpose article, the thing reverse screw adapter Becoming had to be bought, but since this product had become yamaha reverse screw correspondence from the beginning, it was chosen.
View detail
Since it seemed that slack came out in early stages, it increased several times and the bundle was required. If it goes to attack once, I will think whether there is also any cause which is pushed down about 10 times on the first, or is returned.
Since it seemed that slack came out in early stages, it increased several times and the bundle was required.
If it goes to attack once, I will think whether there is also any cause which is pushed down about 10 times on the first, or is returned.
View detail