Reviews
For replacing deteriorated plug caps.
Used for YSR80 in Restore.
Since it is universal, it can be used for any type of car as long as only the angle and length are taken care of.
It had deteriorated quite a bit and was causing poor contact, so Spark is back and looking good.
I would like to Repeat again if the opportunity arises.
View detail
For As Uotani!
IgniCoil is also not viable without this Type because it requires a Plug cord that is longer than NORMAL because of the relocation. Thank you for your help. View detail
For As Uotani!
IgniCoil is also not viable without this Type because it requires a Plug cord that is longer than NORMAL because of the relocation. Thank you for your help. View detail
For now, we replaced it with an emphasis on appearance.
I can't tell the difference in driving by the Cap alone, so I'm going to change the Others and everything else. View detail
Plug cap
While the replacement itself is easy since all you have to do is screw in the cord, I really have to wonder if it is really Large sturdy enough to screw in. (Fixed with Tie Wrap, in case you are interested) What are your thoughts on the Cap only since it was replaced at the same time as the Ignition coil? View detail
For MACH
Purchased to change the routing of the plug cord
I was able to put it back together nicely.
Performance is second to none.
View detail
Since fault generated whether it was a life for the product which was being used until now, it is a change. Since resistance is lower than pure normal, it uses, but it may be comparatively short-life.
Since fault generated whether it was a life for the product which was being used until now, it is a change.
Since resistance is lower than pure normal, it uses, but it may be comparatively short-life.
View detail
No fear of cracking
Material:Plastic can break when it falls over, so Material:Replaced with Plastic's Plug cap. View detail
One of the parts not to be underestimated
The inside of a friend's Motorcycle plug cap was rusted and ruined, so we bought one for our TL125 while we were at it. Recently, the starting performance first thing in the morning was not good, and I had to do KICK 5-6 times to get it started. Better start-up." I believed the voice that said, "I've replaced the
No Chalk & KICK one start was successful.
The plug cap before replacement was also an old NGK one, but I didn't expect such a drastic change. I wish I had replaced it sooner.
For those of you who ride a motorcycle that is more than 10 years old, we are looking forward to seeing you.
View detail
That's NGK.
I installed a Hyper Ignition Coil in my Gixxer, so I also installed a new plug cap, but the idling is very stable and the response is good. I am glad I bought it. View detail
2nd old car Replace
Reliable NGK products.
I have never been betrayed in the past.
View detail
We also replaced the Ignition coil.
I replaced the plug cap along with the ignition coil.
Originally, it was an L-Type, but due to the price, I decided to go with the 120°Short Type, and it installed without any problems.
The Snap and the stable way of getting into it, without any wobble.
I think it would be cooler if the engraving of the NGK logo on the body was painted white.
View detail
A little different from the picture.
This doesn't improve performance, but it's a safe component to add.
In the photo, the NGK Logo is painted white, but the one I received was all black, so I was disappointed.
View detail
Exchange together
[How is it used?
When I replaced the Ignition coil of SEROW, I also replaced the Plug cap.
The OEM Product was good, but it was expensive, so I bought this one.
I think it is highly universal because there are various shapes.
I purchased a similar shape to the OEM Product.
How was your experience with it?
Just changing the Plug cap will change the look.
It's nice to plug in the Plug without any rattle.
Rubber cap is attached to the cord side and the plug side.
I think it's Large sturdy even with water on it.
The quality is stable.
How did it compare to other products?
The OEM Product was Black, but it was faded, but I made it to the Plug cap of the Red color.
It's a little cooler.
[Points to note]
If you don't plug in the plug cord properly, it may leak from there.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Plug Cap
About quality and texture - Excellent quality, the finish on the plastic and NGK logo is really nice. About the feeling of use - Fits nice and firm onto the end of the spark plug and has the rubber boots to keep the moisture out. Products to buy together - A new NGK spark plug would be recommended to go with this install. Difficulty of installation - Easy to install, slide the rubber boot over the lead first and then screw the plug cap into the lead. Cost performance and comparison with other products - Good pricing and from a brand you know and can trust. About shipping and packaging - I used the sea freight option so slow but arrived in the time frame advertised and well packaged. Any concerns, cautions, or advice when purchasing - The Webike listing had the required information but I needed to visit the NGK website to understand it and confirm it was correct for my motorcycle. View detail
I have no problem with the product at all.
The quality, the price, and the delivery time were all of the high degree of satisfaction, but the Thumbnail displayed on the search result list screen is the same representative image of any Spec.
If it's too much trouble to buy it even if it's in stock, I'll put it off. I hope you can improve it.
View detail
I'm happy with it
By installing SPTakegawa Hyper Ignition Coil and Power Filter at the same time, the maximum speed has increased by 5km from around 500km after installation.
I'm not sure which product did the trick, but I'm happy with the look.
View detail
Great value spark plug cap
Needed a new spark plug cap and instead of replacing it with the same OEM one from Honda I decided on this one from NGK. Great price and quality product from NGK as you would expect. I had never replaced the spark plug cap on a ignition coil lead before but it was as simple as unscrewing the old one and screwing back in the new one as they have a self tapper srew like on the inside of the cap that just bites into the coil lead. I might add a little colour to the NGK logo on the plug cap in the future for a little bling. View detail
It's a nice Small bean color.
I used it on a 1960's Motorcycle called Honda's Benly 50 No. C92.
The Plug cap that came with it when I got it was not OEM either, but it was a Quantity:Pair (for Left and Right) Because it was different, and the Plug cord was almost decayed, I decided to replace the cord and Cap entirely.
Replacement is very easy, just twist in the Plug cord.
Because I also changed the Plug cord together, I did not mind, but when I exchange it with the thing which is originally attached, I think that it is better to install it after cutting the tip of the Plug cord about 10mm.
Because the plug cap side is on the wooden screw, and it is installed so that it may be twisted into the core of Cable, if it twists as it is in the place where it was removed, it may be loose, and it becomes the cause of the ignition failure and the dropout.
As for the insertion diameter of the cable, the one that the outside diameter is thick like the power cable of the same NGK seemed to be just right.
I used the Vintage Style Plug Cord of Guts Chrome which has a thin outer diameter, so it lacks a sense of fixation, but the Waterproof Cap is Exactly, so I think it will not come off.
If it should come off, I'm thinking of using a Heat Shrink Tube or something similar to match the outer diameter.
The mood of the color is Small bean color, not like "Red".
Quantity of images:It's more of a second piece than a 1pc. eye.
The vehicle that I installed is a RealVintage motorcycle and it looks better than I expected.
By the way, because Terminal nut is unnecessary Type, it is not possible to use it for the Spark plug with Terminal integrated.
View detail
After all, this Brand
When I bought a new Ignition coil, it did not come with a Plug cap, so I bought this one.
Reduction in cost, NGK logo is engraved on the body, but no color is applied.
It was sad, so I poured correction pen liquid, lightly scraped off the protruding parts, and finished high.
As for performance, it's not something you can say about now.
It can be used with no worries at all.
View detail