Reviews
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Standard Custom?
[How is it used?
OEM plug cap came loose, so the entire Cable was replaced.
Was the one you received as per Image?
Yes
Was the installation difficult?
I had no problem if I followed the Instruction Manual.
How was your experience with it?
It seems to have become somewhat more powerful … I think it's in the realm of Brushboards.
[Included Parts:were they on?
Logo sticker for Terminal nut, Joint and NGK
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I am satisfied with the texture and the bright colors!
View detail
Fits: HONDA CB500F, YAMAHA BRONCO, YAMAHA VIRAGO250(XV250), YAMAHA VIRAGO250(XV250), YAMAHA VIRAGO1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR250, YAMAHA XG250 TRICKER, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA XJR400R, YAMAHA XJR400R
Due to the occurrence of a chronic illness
One of VECSTAR's pre-existing problems, plug cap disconnection while driving, occurred, so it was replaced.
In the case of VECSTAR, the Ignition coil can be replaced from the root, so the cap cover and seal were removed and relocated from the OEM.
The OEM cap cover cannot be relocated without cutting it, but without it, there will be a gap in the Engine Cover, and water and Garbage will hit the Plug hole area, and cooling fan air will leak out.
In the case of Scooter, it is a Large cut to make sure that the cord length, path, and Clamp are correct.
Color for easy visibility as it goes through the Cowl of the Scooter and for easy recognition of dirt and deterioration.:Yellow
The Engine started once before the replacement, but it seems to have Torque up somehow. I wonder.
So far, no omissions have occurred.
Since it is a single cylinder, I am not too concerned about the price, but with four shots, I think it is a bit expensive.
View detail
Fits: HONDA CB500F, YAMAHA BRONCO, YAMAHA VIRAGO250(XV250), YAMAHA VIRAGO250(XV250), YAMAHA VIRAGO1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR250, YAMAHA XG250 TRICKER, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA XJR400R, YAMAHA XJR400R
Used in FTR223 (Used with Utani Coil)
Since this impression is for use with the Uotani Coil, it does not describe how to connect to the normal plug cord.
[How is it used?
Model used:FTR223
Applications:Street riding, Touring, Circuit riding, Dirt riding
Period of use:about 3 years, bought and used Repeat (1st pc 2 years, Quantity):2pc about 1 year)
It was used in conjunction with the Uotani Coil.
Was the one you received as per Image?
As per Image.Color:The color of Yellow was good, and it did a good job as Accent.
Was the installation difficult?
Inserting the bracket into the Utani Coil is a difficult task and requires a lot of hang. Installing the bracket attached to the Utani Coil is also a bit of a challenge, as it requires a bit of a hang.
However, if you have enough time and work calmly, you will not fail.
How was your experience with it?
It was difficult to evaluate the performance of the Single Body due to the effect of the Uotani Coil.
The quality of the plug cord itself was good, the precision of the plug cap was fine, the insertion into the plug was secure, the coating was solid, and the heat resistance and durability were good.
The colors were strong and there was almost no fading.
As for the performance degradation of the plug cord, with my Level, I can't feel it and will replace it after about two years of use. I thought it was unnecessary. I thought it was unnecessary.
The processability of inserting it into the Utani Coil was good, and I was generally satisfied with the results for my use.
[Included Parts:were they on?
Yes. Please refer to the product description.
[Was there anything that disappointed you?
None
Point and hang of installation
The insertion hang to the Uotani Coil
Crimp the terminal attached to the Uotani Coil so that the bracket part becomes as narrow as possible.
Contact recovery Spray (Wet Type) on the area to be inserted to make it slippery and then insert it.
After insertion, use a parts cleaner to wipe off the contact recovery spray on the outside of the coil connection.
Seal with a fast-drying elastic adhesive such as Cemedine SUPERX2, etc. according to the Utani CoilInstruction Manual.
View detail
Refresh the Spark route
[How is it used?
It was Power cable until now, but because it was uncertain how many years it was using, it changes with Electric LineCheck of Coil, Cable, and Plug.
Was the one you received as per Image?
Yes
Was the installation difficult?
No, sir.
However, it took a lot of effort to connect to the Uotani sp2.
How was your experience with it?
The feeling side is good.
Also, Spark was stabilized and Idling RPM was increased with the same Idle Screw adjustment.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
No
Other items that would be helpful
Electrical system of old car is not good anyway. It is best to replace it completely.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Effective
It's cheap and it works. It looks really good too. View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Torque up in the low and mid range!
In the beginning. Please note that this is an impression of the simultaneous installation of "NGK 2-wheel Power cable" and "SP Takegawa Hyper Ignition Coil". (Sweat)
I was trying to make it easier to cruise at about 70km/h on my MONKEY125. (Enhanced high rpm range) I installed this parts. The impression after the installation is that the car is more powerful and has more room to accelerate when starting from zero when waiting at traffic lights. Torque up in the low to mid range is amazing. The torque up in the low to mid range is amazing. The hill climbing ability is also improved. It is easy to install and recommended for custom beginner. The torque at 3500-6000rpm is thicker than normal. If you change one by one, you may know the difference. (Sweat) Custom inside the Engine is not done because of the durability problem, but this Custom of the ignition system is Recommendation.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Refresh
[How is it used?
I recently got a CUB for commuting and have been tinkering with hanghang.
I installed Minimoto's 88CCKit in the engine and changed the carburetor to PC20.
I thought I hadn't done anything to the electrical system, and the Plug cord was getting hard, so I replaced it.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Just unplug the old cord from the Ignition coil and plug it in while spinning it around. I think it's a good idea to spray some lubricant on it to make it slide better.
How was your experience with it?
I'm not sure. lol
Maybe the Engine is getting better?
[Included Parts:were they on?
It comes with an Attachment that disconnects the original old Cable in the middle and connects it to this product. But I did not use it.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I think that the most important point is the lubricant during insertion.
View detail
Fits: HONDA CRF250R, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI DJEBEL250 XC, SUZUKI DJEBEL250, SUZUKI DJEBEL250, SUZUKI SAVAGE400, SUZUKI SAVAGE400, SUZUKI GOOSE350, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI GOOSE250, SUZUKI GSX400, SUZUKI GL750 INTRUDER, SUZUKI SX200, SUZUKI SX200, SUZUKI SX125, SUZUKI NZ250
It is different from the Cable size stuck in the NORMALIgnition coil.
Because the cable size of the NORMALIgnition coil is 7mm, the cable joint is attached as shown in the title.
If you are thinking of replacing the entire cable directly from the NORMALIgnition coil, the Racing cable is better than this one.
In the video, it seems to get too good (mystery) and fire comes out from Exhaust System.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Grom Plug cord replacement
Simultaneous replacement to replace the plug
OEMPlug cord with Cut and attached Joint
Just connect it, but depending on where you cut the cord
In the case of the Grom, the exterior must be removed.
Joint, but if you can see it, do not remove the exterior.
It can be installed. There are various code colors.
The NGKMark on the plug cap gives a Custom look.
The color was not attached, so I inked it with Touch up.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI GPz1100, KAWASAKI GPz1100, KAWASAKI ZZR1200, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-10, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1100
Expect durability
Of course, since the exchange removes the Fuel Tank, work is Large strange in its own way, but after installation, a custom feeling has been enough in the Plug cord which can be seen peeking from the gap of the Fuel Tank. View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Stable plug cord!
ZEPHYR750's OEM plug cord was broken and replaced with an NGKPower cable I did
I machined and installed the OEM code Coupler without using an intermediate joint
Compared to the OEMs, the NGK code was thicker and the outer rolls had to be cut down It should have been possible to hold it well on the housing side, but the processing failed and the I reinforced it with SiliconBond to complete it
You can reduce the time and effort by using the intermediate joints The Cable color is Color:Choose Yellow Personally, I'm happy with Match to ZEPHYR
View detail
Fits: HONDA X11, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1100XX SUPERBLACKBIRD
Good
It fits perfectly on my Honda CBR XX super black bird compared to the OEM this is more thicker.it would be much better if the instructions were in English I used Google translate to translate it to english.and the images on the instructions were very clear so it was much easier to install the delivery was very quick too NGK is a good brand and the quality is top notch if you are planning on changing the old cables this is a perfect choice.i was changing my old coils so I thought I would change my coil cables to and this is a good choice I am happy with my purchase View detail
Fits: HONDA CB500F, YAMAHA BRONCO, YAMAHA VIRAGO250(XV250), YAMAHA VIRAGO250(XV250), YAMAHA VIRAGO1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR250, YAMAHA XG250 TRICKER, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA XJR400R, YAMAHA XJR400R
Repair and a little fashion
I used it for TW200
When I got the car used, it was pretty badly done, and the Plug cap was also loose, so I replaced it I did
Because of this, the Ignition coil side, in the limit to which the Joint can be attached, is a bit of a challenge I cut the plug cord and installed it
After installation, I think the Spark has stabilized, but it's probably Brush-bo, lol
I'm not looking for performance at all because I was just uncomfortable with the old one, but it looks a bit custom It's good because it gives you a feeling
I'd like to use it again next time in a different vehicle, as it seems to have a choice of angles
View detail
Fits: HONDA CB500F, YAMAHA BRONCO, YAMAHA VIRAGO250(XV250), YAMAHA VIRAGO250(XV250), YAMAHA VIRAGO1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR250, YAMAHA XG250 TRICKER, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA XJR400R, YAMAHA XJR400R
A year and a half after installation, used on a LIVE DIOZX DAYTONABore up vehicle
I installed it on a LIVE DIOZX with the Daytona bore up kit
The car itself was old and the OEM Cable was getting hard, so I replaced it
The advantage of this product is that the Cable is very soft and the plug mounting part is crimped It is
In the non-crimped plug cap like NORMAL, I used it for vehicles with a lot of vibration The part attached to the plug cap and the plug widens by the vibration and the power from the Coil is lost Losses
Harley-Davidson's OEM plug and plug cap, which are particularly prone to vibration, are also It is a Crimp formula This leads us to believe that the Crimp formula is reliable
My LIVE DIOZX uses the Daytona bore up kit and vibrates more than the OEM condition I'm glad I chose this power cable because the number of
Since the original Engine Displacement Volume is low, the Spark is stronger now Torque is out i don't know how much better the Engine works, though I can't see the etc. in my head So I think the power loss is reduced
When Cap is removed by Setting and Maintenance, Cable is soft, so we can work is very easy to do
It's been a year and a half since it was installed and there are no problems at all
View detail
Fits: HONDA CRF250R, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI DJEBEL250 XC, SUZUKI DJEBEL250, SUZUKI DJEBEL250, SUZUKI SAVAGE400, SUZUKI SAVAGE400, SUZUKI GOOSE350, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI GOOSE250, SUZUKI GSX400, SUZUKI GL750 INTRUDER, SUZUKI SX200, SUZUKI SX200, SUZUKI SX125, SUZUKI NZ250
The exchange works!
It was installed on my FZ750 which was suffering from Idling instability
At first I thought that the replacement work would remove the Ignition coil, but I removed the Radiator, and I was able to make it to the point where it was possible to make a new one I abandoned it because it seems unlikely to be able to replace it without it, and I decided to replace it from the middle of Cable ( (As per the Instruction Manual)
Originally, my motorcycle was deteriorating with age, but I could immediately feel the effects of the Engine The blowing and torque feeling was immediately apparent when I moved it
Idling instability is not fully discussed, but the stalling symptoms during idling have subsided and the I am satisfied with the performance
It may be more effective on an older Motorcycle like mine
View detail
Fits: KAWASAKI ZZR1200, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-10, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI GPz1100, KAWASAKI GPz1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100
Power up?
The OEM was getting tired and I replaced it with this one Maybe it's just my imagination, but I feel like my Response is better It's not hard to install, but I left a little of the original cord and connected it with the Connector It doesn't refreshed because of the way it's done I'd like to see improvements so that I can connect directly to it View detail
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
NGK Power Cable (Plug Cord) REVIEW
Have been using this power cable for the last 3 months and no problem so far. Along with iridium plugs the spark provided has been very good. No missed firing has occurred. It also feels like the sparks are fuller and producing a little more power than the previous original stock cable and normal plugs. Also the material of the cable is silicon which will last longer than the stock rubber cables and it a good upgrade for long term use. View detail
Fits: HONDA CB500F, YAMAHA BRONCO, YAMAHA VIRAGO250(XV250), YAMAHA VIRAGO250(XV250), YAMAHA VIRAGO1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR250, YAMAHA XG250 TRICKER, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA XJR400R, YAMAHA XJR400R
It's neither good nor bad
Installation in 1977 model SEROW 225-3 RW 1.
OEMPlug cord was deteriorated, exchanged because of a misfire symptom at the time of rainy weather and thick fog.
Just connect the OEM code and product code to the existing dimensions and connect them with the attached Joint.
I can not feel the difference in performance, I believe in advertising and expect it.
The above symptoms have been improved and satisfied.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
I think it's good..
I purchased it together with Iridium plugs as part of Maintenance. For OEM code 7φ, this product is 8φ, so we attached the code after processing.
I did not expect any effects or sensory things, so I wanted to replace before Trouble occurred, so I exchanged it.
View detail
Fits: KAWASAKI ZZR1200, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-10, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI GPz1100, KAWASAKI GPz1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100
I tried installing it.
The installation was very easy, and it took about 20 minutes as working time. It was Large strange to remove Tank and Air cleaner BOX.
I tried replacing it with Iridium plugs at the same time, but before or after the exchange, something did not change greatly.
It seems that Idling seems to be steadily delicately stated.
I have not measured fuel consumption yet, but I expect a little.
View detail