Reviews
Fits: KAWASAKI Ninja 650, KAWASAKI NINJA400 (2014-), KAWASAKI Ninja 400 (2014-)
Severity Up!
I thought that I wanted to replace the Screen a while ago, but I was suffering with Clear or Smoke and I could not make it to purchase. Just to exchange it, I decided to make Smoke and push out Custom feeling, I purchased Smoke.
The result is ..., the rigidity is up and the rectification effect also became around the chest → chin! It is also satisfactory in installation accuracy, it can be exchanged if there is about 5 minutes.
To mention the inadequacies, the fact that the curvature of Screen became Large, there is distortion in the view over the screen from Seat and the price is high.
Although there are some disadvantages, I was satisfied with it, so it was good to purchase it.
View detail
High speed traveling has become easier.
From the feeling that the wind hit the chest before, now the wind hits the upper part of the Helmet, so the high speed running becomes very easy, the fatigue after driving is visible to the eye visible. With lady there is a difference in Large, texture and surrey are also good. View detail
I think that it is quite good
Full cowl is recommended for those who think A little. I'm in good shape.
I tried to install the protective mall but it is easy to warm it with hot water.
View detail
Fits: KAWASAKI Ninja 650, KAWASAKI NINJA400 (2014-), KAWASAKI Ninja 400 (2014-)
It is perfect for the position of the Screw hole
The price was also affordable, easy replacement just to remove and attach 4 Screws, because I changed from Clear to Smoke so the impression of the face changed quite a bit and I felt Custom feeling. The way to successfully install Protective Tubes attached around Screen is Netetc. It is necessary to check with. View detail
High quality goods
It is impression attached to ZX - 14R. The quality of ScreenSingle Body is carefully made up to the point that it is quite high quality and invisible. Installation is perfect for six hole holes perfectly. There is some problem but Level is completely no problem. If you install Windscreen Mole, the step between Upper Cowl and Screen Body disappears (It becomes inconspicuous) It looks like a design. However, it is a place to review for quality improvement in the future that the gold tool fixing the two ends of Windscreen Mole looks cheap and must be pinched by Pliers. I decided to do without Windscreen Mole. If you attach the wind bleed hole open to Screen which was initially worrisome to the car body, it will become better.. Although it is not running seriously after installation yet, it seems quite a windproof performance. The field of vision is not distorted and there is no problem but it is frustrating Zero gravity has a sense of clearer. (This is really regrettable) Either way it's a good product made solidly. View detail
OEM Product? I think it is Exactly
Since Impre as Screen has many comments from other people, I will write about the time of installation.
If you attach Attachment such as Smartphone Holder using Mirror joint tightening Handle clamp holder, I think that it is better to position it before Screen installation.
Although we are MT-07, since it interfered with Screen at the initial position, we installed Screen earlier just by loosening the Holder, but after installing Screen, we could not remove Mirror. (If you forcibly bend Screen you can manage it somehow)
Screen itself is easy to install, I think that it is a recommended product.
View detail
Good shape and Gradation
I thought about installing Screen for the first time, since the price and shape seemed to be good, I decided to purchase. Installation was carried out while leaving Standard Visor, so that Wiring of all Meter was not visible. Although the clear stream effect has not yet been felt, the installation condition and Gradation - I like Coloring. I wonder if my face looks a little better .... If you get out, please translate (I'd like to have an Instruction Manual here). View detail
Large durable even in summer hot weather!
Aiming at the rectification effect too, in the Motorcycle without the Air-conditioner it will be hell in the summer (And who was riding a certain TouringMotorcycle were talking about Hah).
As this product can not be experienced without traveling at a certain speed even at high speeds, I think that the way this effect works is good.
View detail
Exactly to those who want to Imechen
NORMAL 's charming face is also good, but I wanted to make a little Sharp look.
After installation, it looked like Image street.
View detail
Change in appearance
I selected Clear.
Since the OEM was about Semi-smoke, I tried Clear.
It gets a little higher than OEM's. I felt that the direction of the wind flowed to the top a little.
If you lie down at high speed you can prevent the wind to Helmet.
If there is one hex of installation, you can replace it immediately.
However, although it is hard to install the attached rim dumpling, you can install it for as long as 30 minutes.
I am satisfied with the appearance and the function.
View detail
I can not think of no more
Since NAKED is first, buying it will be wind pressure.
I do not have much to lie down..
Either you or yourself, one mounting hole on Bracket does not match the diameter of Bolt
Bolt did not pass.
I cut it for a while with Leutor.
View detail
That's right MRA
Screen has reliability including MRA design, performance.
Compared to OEM's Small Meter cover there is definitely a rectification effect.
It is not full cowl so it's cruel to compare with NINJA, but Naked is enough for this.
Design also matches the car body without impairing the feeling of NAKED.
View detail
Short Type Screen
I was looking for Short Type at the beginning
I liked the shape so I purchased MRA.
I also like Color because it is almost black and not transparent.
It is troublesome to remove Mirror by replacing Screen
This is TMAX so it can not be helped (Lol)
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Image is different from a picture?
I do not particularly complain, but I feel that it is different from Image's image. Is it because of the angle of the picture?
Although it seems that there was also a Review with the mall attached, there is no attachment, I think I will not get hurt because I was not sharp when I touched the Edge.
Although I thought that OEM seems to be better than the one feeling, there is no sense of incongruity and Design when looking diagonally behind is Parenthesis good.
Wind speed does not feel much change at low speed, but when Speed ??comes out a little and the wind pressure corresponding to Helmet drops considerably.
It is secured with Smoke and visibility is not inconvenient, and I am satisfied overall as a whole.
View detail
MRA Screen Racing CLR
Up to now Puig (Pooch) I was replacing Screen twice, but for the first time this time it was MRA.
Fit feeling is better than Puig. Puig was rather somewhat gaughed or slightly pulled to install, but this item was easy to install as OEM.
I think there is likes and dislikes about the shape, but this Fit feeling is nice.
In addition, although a mall may be necessary for a car inspection, this item is attached and the posture as Manufacturer can be evaluated.
However, it seems a bit disappointing that the portion that Black is getting smaller is smaller than Puig and the Antennas of ETC has become visible - - -.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Excellent rectification effect
Because it was dissatisfied with OEMScreen's windbreak effect so much, exchange with MRA Screen.
The appearance is as high as 3 cm, but the rectification effect is outstanding, the wind got very easy without being brittle.
If you lie down, the wind goes through the head feeling.
I am very satisfied..
However, the position of the hole of Screw is too Limit and it is hard to install
View detail
Fits: KAWASAKI Ninja1000 (NINJA1000 Z1000SX), KAWASAKI Ninja1000 (Ninja 1000 Z1000SX)
More satisfied with the look than the function
I think that the evaluation of OEMScreen effect of Ninja 1000 will be divided by people.
Not a Pure Tourer, I can not expect the overwhelming windshield effect.
Nevertheless, I was disgaged by running wind and insects hitting the face at high speeds, I wanted to improve and bought the MRA Screen.
Since there was a possibility to shoot in-vehicle movies via Screen, initially I was thinking of Clear Color.
However, since this item seems to have Gradation going into the lower half also in Clear, if that is the case, choose Smoke to match according to body color.
There is no difficult place for desorption work.
Vinyl mall is attached because the outer edge is sharp as it is with the cutting surface of Acrylic as it is.
Since the mall is an exquisite Length that Just fit to the upper end of Screen, attention is required so that there is no gap.
It seems that it is not attached with the product image of Webike, but if it actually wears it will look like this picture.
Well, when I start running the key wind protection effect ... Well, is this such a thing?
Compared to OEM, I certainly feel like I was improving.
I feel that the insects' crash into Helmet also decreased.
But, if you say the difference between Level clearly understandable, it may be a bit difficult.
As I posted my attitude forward, I was able to confirm that Wind Cutting sound was reduced even with a shallower forward tilt, but as long as I am in a daily riding attitude, there is no big difference.
However, more than expected than expected.
I chose the Smoke that can harmonize with the body color and was the correct answer.
As long as you are on a ride it is also Parts that go into sight, so I think that it is Large thing that you can be satisfied with the appearance of this part w
It's pretty good on the function side, but it was a good shopping because the satisfaction level on the look surface was high.
View detail
Design is the best - - -
Since Tank is short, it is impossible to hide in the Screen unless you can not hide the butt properly, but even with ordinary Position there is a Protection effect even around the chin.
Large There is no shakiness, design and color are good.
However, Bolt fixing Screen to Bracket is Quantity : It is regrettable that 2pc was out of stock.
View detail
MRA fighting in the world
Ninja 250 OE MScreen is low in height and strong in the wind.
I installed MRAScreen Racing to improve it.
MRA is also attached to the ZX10R which is active in FIMSUPER BIKE, I think that it is a reliable Brand.
I chose Clear so that the front can be seen even when I fell down because Helmet shield is Smoke.
There is a bit of distortion, but it is no problem Level.
Windproof is also improved, height is not too high Cool!
However, although there is no problem in terms of strength, it is somewhat problematic that the thickness is thinner than OEM.
In the case of Ninja 250, Screen is fixed only by Mirror.
Because it is designed to be just right with the thickness of the OEMScreen, there is play in the MRA's thin screen can not be fixed perfectly even if tightening the Mirror bolt tightly.
In order to prevent backlash, Cushion is attached in the gap, but still it moves slightly up and down.
If you improve it there is a satisfaction with Large - - -
But it is good because there is not a problem with the use.
View detail
Installation is Large
Installation is from BracketQuantity from Handlebar : Meter's warning Lamp disappears with 2pc
It may be only the things I bought, but since I did not have the installation instructions, I installed it with all intuition
Well liked the thing itself I just wanted to manage ETC's Antennas to hide and looks like Mohawk
View detail