Reviews
If it is a bit cheaper
Because we are installing OEM's Engine Guard, Guard will not do this product only, but Custom feeling is
I thought it would come out and bought it. It is satisfying Large if it can be cheaper about 10,000 yen, but I can not deny the feeling of quite expensive.
Also, the center of AGRAS Plate is One point, Red color was a bit conspicuous, so now Black
I replaced it for Plate. The latest one seems to be Silver and the texture is also improving.
View detail
Motorcycle has a necessity
We will limit the damage to the car body from the fall of the emergency to the smallest limit. I installed it by saying.
Attached attachment Bolt is long and heavy so I exchanged it with other things and attached it.
Looks like Large I'm crazy! I got a good Dress-up as well
Clearance is Limit for YOSHIMURA's Exhaust System
View detail
Design is Large Satisfactory but Difficult to Detail.
【What made you decide the purchase?】 Because I like AGRAS design
【How was it actually used?】 Because it is a Slider, I do not know until I roll (Lol) Design is perfect.
【Was it difficult to install? (Hard parts case)】 Everyone can do it as long as there are tools.
【Please tell me the point of installation and hang (in the case of Hard parts)】 When installing GeneratorSlider, Handling Instruction Manual states that using existing Washer under Right, but actually it is also on Left. Case and Slider interfered with each other, although it was a little unless you entered Size's Washer.
[Is there anything I was disappointed about?] Bad fitting
【Hope for Manufacturer - Please tell me if there are any improvement points】 AGRAS products were somewhat disappointing because I thought that the Gold amount was rather expensive but I thought that there was added value called Designability and Built-in Goodness.
I hope this opinion can be used as a reference for future products.
【Have you compared items?】 None
View detail
AGRAS full COMP
AGRAS products Left Side's Slider (generator) Because it is wearing Right (Clutch) I also wanted to add side.
Instruction Manual was slightly difficult to understand, but it is simple because it understands the position of the Spacer if it is applied in reality. Even easier with Ratchet and Hex 8 and 6 Bits. Because I did not like the gap with Under Cowl about 1 mm, loosen Cowl's Screw and tension up and tighten upward
I pushed the DURACONParts of Slider down and secured a clearance position of + 2 mm.
Although this is my personal opinion, many elements of Engine Guard seem to be more than Slider
Since my purchase objective is Dress-up, there is no particular problem.
View detail
Measures against standing ups?
As you can see in the picture Slider originally attached, I thought that I needed a Slider further on this I bought it for Dress-up.
Installation is also accompanied by Instruction Manual and it is OK if tools can be prepared. Just replace OEM's Bolt with the supplied Bolt and tighten together.
It will be prepared for a moment's time and it looks good, Parenthesis is nice, the making is also solid and it looks tough.
In Circuit etc, there is a notice that bank angle will be lost.
View detail
Protection performance No complaint
I bought it for the protection of the Engine at the time of falling. Although Engine slider is also on sale from other Manufacturers, it seems that there is only AGRAS made in this model in that it can protect the whole and can be installed with Bolt-on.
It is not necessary to remove Cowl at the time of installation, just by removing Generator cover, Bolt fixing the Clutch cover and replacing it with the attached one, it will be over in 30 minutes. I do not like LogarSeal because I do not like Slider's assertion so much. By the way LogoSeal is red in the picture, but what was delivered was LogoSeal of White.
Although the objective is to protect the Engine, the exact condition is exquisite, as Cowl does not ground to the ground when it is brought down as it is, it also has an effect as standstill countermeasures. Since Material is DURACON, it is considerably scratched by just touching the ground once, but if it is only DURACON it can be purchased at webike so it can be said that only DURACON exchange is done if it gets hurt.
The essential engine protection function is - - -. I was able to confirm the effect because I fell to Sheng Large in March. As a conclusion it is a word of wonderful. I mistook the Brake operation on a wet road and fell down with a speed of about 30 km, then the Motorcycle slid about 10 m and hit the wall and stopped.
Cowl got scratched and broken as expected, but it is totally unscathed on Engine Body. I was able to return home by self-propriety. Since Bar End was in the state of grating like Large roots, if you do not have this Slider, you will have to open a hole in Generator cover and you will not be able to run and you will have to wait a few hours for RoadService on the spot Would not have been there.
As the performance as a Slider was excellent, we introduced Bar End with DURACON made by AGRAS on behalf of OEMBar End, which was put in a state of losing roots. We plan to introduce Axle Protector made by AGRAS later, and now it has become an AGRAS believer now.
There is no dissatisfaction with the product so far as to say it at all but if it is dissatisfied it is DURACON of for Repair described above. 1pc. I will pay 5,000 yen. I'm happy if you make it a bit cheaper - - -.
View detail
Insertion of standing gore installed instead
Easy to install, just replace Engine Mount's Bolt and fix the Slider. As Engine is fixing Bolt so please be careful not to install One Side each time the Engine will be displaced. View detail
Beyond my control - - -.
Though it is a new model, it is thankful to release it immediately. Since there is neither shape nor Cowl processing, the working time can be installed as long as 10 minutes.
As engine mount Bolt, let's keep Torque management proper!
View detail
Replace with another company's Slider
Previously I had attached another company's Slider, but installation is stopping Engine and Frame Quantity : Because I co-tighten using 2 pc Bolt with 1 pc, I thought that the neighboring Bolt was feeling 1 pc left and it was not good looking ....
This product, Quantity : Since 2pc is used together and tightened together, there is no feeling that the parts are left over.
Although it is more expensive than other companies' products, Bolt and Spacer, which are included for attachment, are also Material : Stainless Steel, there is only expensive. It is satisfying because the product precision is very high.
View detail
Slash guardBlack is out of stock so purchase instead
GOLDMEDALGold medal : I ordered Black of Slash guard, but purchased AGRAS because it was out of stock. Installation Frame slider needed a proper tool, but it was simple basic. Quantity on Instruction Manual and packaging : Pair (for Left and Right) I think that there is not much to make a mistake.
Surface finish, satisfactory and satisfactory Dress-up parts with good accuracy. I do not want to check the essential effect so I will run like a dumb.
View detail
I wore it with looks and insurance expectations!
It is not an original use because it does not run Circuit, but easy customization and "Standing gore" I adopted it with insurance expectation. It is relatively easy to install, it is not necessary to process Cowl, it seems that DURACONParts for expendable items can be exchanged and it is GOO! View detail
AGRASRacing slider
I installed the meaning of insurance for the first time for Large type Motorcycle.
I chose Logo, but I like it because I'm matching with the body color.
I do not want to take care of me if I can.
View detail
Cowl's Cut is the smallest limit.
ZX-10R purchased in second hand (2010) It was attached to.
This product is attached to the engine hanger of ZX - 10R Quantity : Pair (for Left and Right) Of each of the four Screws, it is a product to remove Bolt on the front side of the Engine side, not the Frame side, to install it.
Therefore, since the engine hanger bolt of Right Side exists at a position not interfering with Cowl, the bearing part is not so long and Screw is also short, Leow Side has Cowl on Engine hanger bolt, so the Bolt part Only need to drill and install.
2008-2009 is easy to open holes as interference Cowl can be removed from the outside but in 2010 the structure of Cowl has changed so much that Cowl in that part is unlikely to remove about 6 Screw from the inside not. It will be the procedure to locate and then re-install the hole afterwards.
In terms of coming up on Cowl, the axis also protrudes relatively longer than Right Side.
While watching the scratches on Cowl, it seems that only the lower part of Cowl and Mirror will be scratched even if standing on the Right Side.
If they are to be used as insurance at the time of gokke, it may be good to use on public roads.
However, these Sliders are originally Circuit Items for sliding out Motorcycle from Course on the Course, so pass and etc. It is better to understand that it is a product that may slip to GuardRail if it falls over.
Construction itself is quite solid, and rattling etc. I will add that there is nothing at all.
View detail
Design is good!
GSX1300R HAYABUSA also has a similar Slider, but it was saved when actually standing.
What I decided for this Slider is the shape and Logo design & color.
The point that the Red line and white characters are casually Accent in Black is Large.
View detail
Expensive but good shape
Although it is more expensive than other companies, I purchased it with the shape of the Slider part, Brand name of trust.
We do not receive advertising expenses from AGRAS (Lol) Then, as the part whose logo of the messenger Manufacturer name is written is a fellow who thinks it is embarrassing, the point that we can choose the logo of the Slider part was also the deciding factor of purchase. Despite the desire, the Bracket department does not need Logo.
Bolt, Nut etc for attachment attached to the product of this hand are plentiful inexpensive Plating, but this product was accompanied by Stainless bolt, I admired that there is only expensive. Product accuracy is also very high.
Although it is not product impression, this product, anyway Quantity : Pair (for Left and Right) We purchase together, Quantity : Pair (for Left and Right) Is it okay if there is some discount for purchase?
View detail
AGRAS Racing slider
Measures against standing on standoff 3
AGRAS Racing slider Generator side is the same Manufacturer firmly Guard firmly ... Why is the price close to double the Clutch side and why is it different?
View detail
AGRAS Racing slider
Measures against standing on stands 2
AGRAS Racing slider It is firm making! It seems that Clutch case cover firmly Guards when falling down.
View detail
Together with Yamaha OEMEGSlider
Since it was uneasy only with Engine Cover Slider, it was introduced this time.
Because the Radiator is structurally fragile, when you ground it
It is good to be able to earn Clearance.
Easy to install, just replace the Engine mount bolt.
The goods themselves are put in a bag written as Right, Left, and they can be liked easily.
If you can, I do not want to be indebted, but as I can not forget it ...
What do you think?
View detail
Relief!
I was wearing a Pipe-like Engine Guard before
I replaced because my feet interfered with Pipe
I made it to 50 Φ Blackwith Logo
It seems that there is a reasonable intensity, so it seems that there is no problem in standing
View detail
Relief!
I installed Slider with Set
You can also be relieved to build firmly
I did not paste Seal at the center, but it was White but not White
I asked for installation at Red Baron,
There seems to be no particular problem in installation
View detail