Reviews
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI B-KING
To curing before rolling
I was able to go home early on Right Side and crawl damaged part of Cowl by self-propelled garment on emergency, but when I roll on to Left, this part was cut first, the worst cracked, the worst cracked, the Oil is self- So I purchased it before mounting and installed it.
Remove Bolt for installation and finish working in 10 minutes.
I think that the price is somewhat higher, but if it rolls without it, it will be even more expensive.
View detail
Is it looks rather Custom than Defense Up?
I was wearing it on the GSX 1400 that I was riding the previous time.
The installation method is extremely easy, first check the Clutch cover to see which Bolt should be removed,
Just remove the target Bolt and attach it with the supplied Bolt.
There is no need to remove the Clutch cover itself, so there is no need to worry about leakage of Oil.
Perhaps it will end in a few minutes.
Since it did not fall over even after installation, the effect as Slider is unknown.
Originally I was also wearing Engine Guard, even though it was mossed, this Slider seems not to be earthed,
In that sense it was becoming a complete looking Part for Custom.
However, in terms of appearance Custom, since Silver's Slider foundation shines very well on Clutch cover in black,
Personally I was satisfied with Large.
It is not cheap Parts, and there is also no functional meaning if Engine Guard is attached with NAKED Motorcycle, but it is Recommendation for those who place importance on appearance!
View detail
Insurance when falling down
I also attached the Yamaha OEM's Side Slider, but purchasing as it is lonely that there is no Slider in the front one.
It is necessary to remove Bolt which fixes Engine during installation. I tried to install it myself, but I decided to lose Bolt so I asked for a go-around Motorcycle shop.
It cost 1,000 yen worth, but it can not be helped.
Insurance when it falls from past experience.
View detail
In case of emergency
Because the Starter cover is well overflowing, I purchased it because it was sometimes impossible to restart if falling down → being broken.
I feel satisfied with the feeling of Dress-up than I imagined when I installed it.
It is only looks that you will be satisfied, so you do not want to be as effective as this product.
View detail
Measures against standstill
For me MT-07 was high in Seat high and I was worried about the feet, so I attached this part at the very beginning after car delivery.
Since installation is only removing Bolt fixing engine and changing it, even if you work slowly it completed in about 10 minutes.
Because it is with Logo, there is also a sense of luxury, I think that I have matched Design of MT-07.
I installed the Slider so I became easier mentally, but do not want to get indebted to Slider.
View detail
I expect to expect performance.
I was attracted to the appearance and purchased.
I was in stock in June but I came in middle of May.
The real thing looks cooler than the picture It was as I thought.
I also seem to be able to expect performance with firmness.
Well, I will drive to not demonstrate its performance.
View detail
Amulet
This time, I installed it myself a word Cowl drilling Large change. Manufacturer also felt kind if there was something like a paperboard.
But I think that it is safe to attach because the position of the installation is an effective place when standing gobble something.
Shopetc. Those who are asked to please some Cowl hole Gap please forgive me (Lol)
View detail
Simple is well suited
I purchased Black with Logo.
Translation (Please enter here Instruction Manual, I think that installation does not have a problem with individual Level if care is taken with One Side each time using Torque wrench.
I do not want to take much care of Slider's original function, but it is a part that matches well with the car body without breaking the design of MT-07 while Simple at low price.
View detail
While the rain is stopping
Just turn Screw, so it's time to install it while the rain is stopping.
With logo there is no stock, it was a delivery date reply at the end of April but I wore it immediately (^o^) /
After all I think that the person with Logo is cool looking personally ♪
I will be careful so that this is just a decoration (^^) /
View detail
I can't give you results on effects so I'm giving you reviews on mounting. It says in the instructions to raise the body when removing mounting screws but you'll be able to replace them easily if you process one side after the other. The bulge may
I can't give you results on effects so I'm giving you reviews on mounting.
It says in the instructions to raise the body when removing mounting screws but you'll be able to replace them easily if you process one side after the other.
The bulge may bother you but it's the bulge that has effect.
Designs are nice and simple.
View detail
Received in original packaging. Clearly labelled which is left and right. Finishing of the slider is very good, with that shiny looking metal and rigid material. I really hope I don't have to drop my bike to proof the quality. I just wish it came with Al
Received in original packaging. Clearly labelled which is left and right. Finishing of the slider is very good, with that shiny looking metal and rigid material. I really hope I don't have to drop my bike to proof the quality. I just wish it came with Allen bolt instead of normal bolt. View detail
Top quality. Simple to install and very clean in appearance. Base plate held by two bolts. Slider held onto base by one bolt. Base plate is very cool billet, lightweight and clean finish. Slider can come with red and white branding which looks very cool.
Top quality. Simple to install and very clean in appearance. Base plate held by two bolts. Slider held onto base by one bolt. Base plate is very cool billet, lightweight and clean finish. Slider can come with red and white branding which looks very cool. Almost compulsory part. So cheap and can save a lot of damage. I crashed without them and my case was ground causing an opening which leaked oil. I couldn't ride home even when the bike wasn't too damaged. But with sliders you have a much better chance of getting home without your friend's van! View detail
Look before you leap was the reason why I had this part.It is firmly made, and thoroughly finished. I am very satisfied with it.Though it said in the manual that this part will touch the ground on circuit courses, it also scrapes the road even on
Look before you leap was the reason why I had this part.
It is firmly made, and thoroughly finished. I am very satisfied with it.
Though it said in the manual that this part will touch the ground on circuit courses, it also scrapes the road even on public roads if you tilt the motorcycle to a certain extent.
It's not the problem of this product. You can't avoid this kind of situation if you install this type of slider on MT-01.
That's the drawback of this part, but still, I think there is no problem using it in a normal way.
View detail
I purchased it on the sale before consumption tax increase. For the purchase, I used the shop point this time. Although it is only a protection in time of falling over, the appearance is so cool. That is what made by Agras. I think that it fits so well, l
I purchased it on the sale before consumption tax increase. For the purchase, I used the shop point this time. Although it is only a protection in time of falling over, the appearance is so cool. That is what made by Agras. I think that it fits so well, like a pure option item. Now it looks to me better than LSL frame slider which was attached originally to the used product.
For installation, first remove the original three bolts of each side. And replace them to new ones. It should take for as long as 15 minutes for both sides. It is expensive product of a set of right-and-left. I am happy as I could buy it on sale and by the use of points. I may give alumite color processing to the aluminum part later on.
View detail
I once fell and scratched my beloved motorcycle in the past. So I was definitely going to have this part on my new GSX-R750.If you have all the necessary tools, the installation will only take 30 minutes or so.Three days after the installation, I
I once fell and scratched my beloved motorcycle in the past. So I was definitely going to have this part on my new GSX-R750.
If you have all the necessary tools, the installation will only take 30 minutes or so.
Three days after the installation, I lost my balance and fell when I tried to make a U-turn. But the cowl was free of scratches.
(The slider got scraped, though)
View detail
About the engine performance, since it has not fallen yet, it does not understand.By , however an AGRAS reliable by a four-point Set, if it is this price, I will think that a Cost performance is very good. Although we and a DURACON with a Log
About the engine performance, since it has not fallen yet, it does not understand.By
, however an AGRAS reliable by a four-point Set, if it is this price, I will think that a Cost performance is very good.
Although we and a DURACON with a Logo were used, it became a Race ish also in Design again.If can be carried out, not falling is best, but it is likely to be useful in an emergency.
View detail
An order was placed at the time of Motorcycle purchase.Since the drilling process of the Cowling was required, attachment was requested from the Shop.It seems that troubles are individually suffered by positioning of a hole.Truly, a result is also goo
An order was placed at the time of Motorcycle purchase.Since the drilling process of the
Cowling was required, attachment was requested from the Shop.It seems that troubles are individually suffered by positioning of a hole.Truly, a result is also good because of Shop attachment, and it matches and is satisfied with the car body of the color.
View detail
If an engine Damage can be reduced for a rainy day was thought, and this product also with a handy price was chosen.It may be unavoidable when it thinks whether it will become awkward if it does not open in a Beauty by time and effort that a hole must be
If an engine Damage can be reduced for a rainy day was thought, and this product also with a handy price was chosen.It may be unavoidable when it thinks whether it will become awkward if it does not open in a Beauty by time and effort that a hole must be made in a Cover at the time of attachment, but there is only this place in reducing a Damage certainly.Although it purchased with the
Logo, I become an Accent unintentionally and think that a Parenthesis is good.
View detail
Although this product and a left-hand side SLIDER50 were purchased and used for GSX-R 1000L0 before the wearing , since it fell at the time of a Circuit run and had changed into a state like a photograph, only right-hand side was purchased this t
Although this product and a left-hand side SLIDER50 were purchased and used for GSX-R 1000L0 before the wearing
, since it fell at the time of a Circuit run and had changed into a state like a photograph, only right-hand side was purchased this time.
The Crankcase was unhurt by the favor of this SLIDER50.
If it does not care about the
crack, as [ this ] can be used, but since appearance is that, it exchanges.
I think that it will be carried out even if it takes the
old article as spare parts, and I will use it at the time of a thing.
Although this was the first time that he was indebted to the SLIDER50, I attach too and thought that it was good.
View detail
It purchased as a charm. attachment time is only 5 minutes. It is the shin without liking to carry out in play about this product. (Smile) Although it is , the time of having attached and seeming to have been good may come.
It purchased as a charm.
attachment time is only 5 minutes.
It is the shin without liking to carry out in play about this product.
(Smile) Although it is
, the time of having attached and seeming to have been good may come.
View detail