Reviews
I thought I should just be careful when installing it.
I installed it on a 2011 CBR1000RR.
Since the parts are related to braking, it is better to ask a Motorcycle shop to install them if you are not confident.
The front brake control is much better, the OEM rubber hose no longer feels like a grippy hose, and the touch is more snug.
The caution when installing the Hose is that the Hose length is a little short, so if you use the same routing as the OEM Hose, the Hose will stick out when you shift on the front stand. Therefore, instead of the OEM Hose going through the inside of the Front Fork, the Hose was routed right next to the Front Fork to the Right SideCaliper. This way, there is more room for the Hose when it is shifted, so I don't think it will be a problem.
Material:The Stainless Steel ones are more durable and reliable, but I would recommend them to those who value looks and cost-effectiveness.
View detail
Recommended for the visually oriented!
I installed it on a 2011 CBR1000RR.
The replacement work is not difficult, but if you are worried about braking parts, it is better to ask a motorcycle shop for help.
Fitting was fine, but the hose length seemed a little long. Other than that, there were no problems. I think it looks pretty cool and gives the impression of being customized. Banjo bolt is Material:Since it is made of aluminum, it is necessary to be careful not to over-tighten the bolts, but the installation Instruction Manual provided the specified torque, so I was able to install the bolts without any problems. I thought the instruction manual was very kind and helpful. Also, there seems to be a possibility that the banjo adapter may be broken in case of a fall, etc., so those who drive on the Circuit should be aware of the Material:The performance of the Stainless Steel hose is excellent, and the touch is much snappier than the OEM Rubber hose, so I would recommend this product to anyone who wants to improve the control of the Rear brake. I can recommend this product to those who want to improve the controllability of the rear brake.
View detail
I am satisfied
I prefer colors that don't look like they are being changed. [Color] I chose Smoke and it looks great. I had no problems installing it, and I am satisfied with the construction of each part.
A separator was included, but I thought it would be better to have a hose clamp rubber included.
View detail
Subtle in length
TRX850 for Rear, but the length is slightly (about 20 to 30mm) It is long, and when I tried to handle it in the same way as the standard one, there was a strong point where it hit me, so I had to be creative in protecting it. I am satisfied with the construction of each part. Bolt On by Car Type That is the only disappointment for the product of View detail
Sufficient if appearance is important.
The aluminum part is not so durable, but if you want durability, why not choose Stainless Steel? View detail
Fits: YAMAHA XG250 TRICKER
Brakes work better.
We replaced the OEM brake hose with this product. The work itself was relatively easy, since all we had to do was to replace the brake fluid by turning the brake hose.
The effect goes from the OEM's squishy Brake feel to a Snap effect.
I was generally satisfied with the product because it was inexpensive and effective.
View detail
Brake hose
Because the dimensions of the product were not written, it was written for Eliminator 400se but did not meet.
Please fill in dimensions, OEM Product No., etc. I bought the wrong product.
View detail
Brake hose
In the picture of the purchased item, Quantity:It shows 2 pcs, but when I received it, only 1 pc was included.
Please indicate what the enclosed product contains in the product introduction section.
View detail
Purchased for XELVIS
I purchased and replaced the "for Front" and "for Rear" together.
No way, it's a replacement from a 30 year old OEM.
I think both for Front and for Rear are a little bit longer than the other, I think it means that Front is compatible with HandlebarUp, but for Rear, it was a little bit difficult to handle.
Also, in order to attach to the OEM's fixture, the rubber protector wrapped around the OEM's hose must be present or it will be loose. The rubber protector was cut open with a cutter and reused.
It's a mesh hose, but it's not a mesh hose. "Snap" The ring is very easy to handle. It is very easy to handle.
However, the amount of BrakeStroke required will be shorter, so it would be good to be able to adjust Lever for Front and Brake switch for Rear.
Air removal is a practice to learn to be mindless.
View detail
Fits: YAMAHA XG250 TRICKER
Brake hose
Cost performance is by far superior. No performance issues! View detail
Snap and it works.
It is clearly different from the OEMHose. View detail
No problem at all.
Bolt is Material when installed:Aluminum, so it is recommended to work carefully.
Torque can be applied without any problems, and BrakeTouch is now Snap after replacing the OEMHose. 。
Durability is often a concern, but I ride only occasionally as a hobby, so I don't worry about it at all. (Lol)
I think it is cost-effective, so if there is someone who is worried about Stainless Steel, I think this is a good choice for them. (^^)
Personally [Color] Smoke color is recommended.
View detail
Fits: KAWASAKI Z125 Pro
Excellent sensation after the skirting sound on Front.
Control in the limit range is good after the skirting sound on the Front.
This is especially obvious when re-gripping after Release.
Specifically, when the road surface at the BreakingPoint before the Corner is rough or wet.
You will be surprised at how well Linear works.
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100 RS
It looks nice.
Since it is a mesh hose, the feel of holding the Brake lever is Snap, but above all, it should be a bright color that does not stand out too much.
I chose this product because I didn't want to wear it.
View detail
Fits: KAWASAKI ZrX1200ZrX1200 DAEG
GPX750R
In terms of performance, it is probably not LARGE different from other products. I am satisfied with the product because it is the color scheme I wanted, and when I actually installed it, it was just like the Image. View detail
Good!!!
DAYTONA's Red Pad and Brake hose are installed as Front and Rear Set at the same time.
It works TIGHTLY anyway!
I now understand how ineffective OEMs can be.
View detail
COSPAR thinks that it is the better one. It can use ordinarily.
COSPAR thinks that it is the better one.
It can use ordinarily.
View detail
Fits: SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S
pure, although the kana ?? grip cost which surely the direct feel increased about the function is also delicate -- it decreased more!! Rather than anything. [ increase and ] Kougami of a visual!! a yellow spice is effective against the combination of
pure, although the kana ?? grip cost which surely the direct feel increased about the function is also delicate -- it decreased more!! Rather than anything. [ increase and ]
Kougami of a visual!! a yellow spice is effective against the combination of a blue red smoked hose, and it is delicious -- ~~~!! (YO~~ which can be used for K8 skywave (burgman) type M)
View detail
Fitting is the highest by the design only for a vehicle type. Texture is also very best.
Fitting is the highest by the design only for a vehicle type.
Texture is also very best.
View detail
It is made required and is sufficient engine performance. Although various Brando has, aren't the engine performance and cost performance the best? although a hose is a product made from aluminum which is a product made from a good ridge, which ca
It is made required and is sufficient engine performance.
Although various Brando has, aren't the engine performance and cost performance the best?
although a hose is a product made from aluminum which is a product made from a good ridge, which carries out and in which fitting is somewhat uncertain -- necessity -- it is enough.
Although reduction in cost can be seen to several places, it is not a part which influences the engine performance.
Is it a brake hose of connoisseur liking? When a difficulty fastens fitting, is it turning together probably because of the quality of a washer?
This is only only then regarded as Allais ?.
Anyhow, a major brand is too high although obscurity Brando, such as an auction, is disagreeable! The front wheel which is a super-recommend is using the Black & gold for a direction very.
Please refer to the direction which worries about a color.
View detail