Reviews
Fits: SUZUKI GSXR1000
EasyGripSupport EVO
The feeling is very good, it is easy to ride because the body is stable even if G is applied. However, the shape does not match the design of the GSX-R1000 K1 fuel tank, and it took a lot of time to position it. In addition, it is a minus point where the price is also high. View detail
Fits: SUZUKI GSXR1000
EasyGripSupport EVO
It is good without complaint, but I think that it is expensive in terms of Gold. I installed it on my GSX-R1000 K1 and it took me a long time to position it. View detail
Fits: YAMAHA MT-09
Reduce body fatigue and maintain posture
I was holding on to the Handlebar because the Tank was slipping when accelerating, but since I put this on, my upper body feels much better.
As for the knee grip, you only need to put a little pressure on it and it's large and strong. Therefore, the lower body is also easy.
No acceleration, no deceleration. (Even in urgent situations) I also think that my posture is more stable when cornering. I'm glad I put it on.
I like it because it looks good because it is a special product for each car model.
View detail
Excellent installation effect
As you can see, it has a very large effect on knee grip and body position retention.
The leather pants that hit the part became miserable because the processing of the edge was lax and was left uncut when compared with Su TanGrip that is similar Items.
If you are going to move the Riding position actively, you should adjust the pasting position many times or adopt the method to smooth the edge of the product.
View detail
Fits: DUCATI 848SF, DUCATI 848EVO, DUCATI 1198, DUCATI 1098
It's cheap and it works great!
Because the one of a certain famous manufacturer was too expensive, I bought it because I found it when I was looking for a similar product. I didn't know much about it, but it seems to have been used in TTRace and EWC on the Isle of Man, and it has a track record.
The cut is clean and the Size is fine.
It's the middle of summer now, but the double-sided tape that I was worried about is still in place because I degreased it properly. (I don't know about other cars, but the 848 makes the Tank hokey in the winter without a hitch.) It's still neat because the cheaper similar products I used before peeled right off.
It is different from Instruction Manual, but I put it on the lower side of Tank. In fact, the effect is improved because it hits more on the lower side.
It has plenty of grip and is not warty so it won't hurt. It is very useful for street riding, hard braking and hang off.
Oh, as I said in the description. "When you open the package, you can smell the unique sweet smell of the ingredients. was true. It smells so good.
Please experience it.
View detail
Fits: SUZUKI GSXR1300R HAYABUSA
Knee grip is easier
I usually wear pants made of jeans and ride a motorcycle, but when I wax them well, they slip and
When you come to a sudden stop, or when you are in a hurry, your body is pushed forward and the Large cut part can easily become Large strange.
I think that this product is a very useful product in the sense that it is easy to separate the body from the Tank more than a certain level in addition to firmly supporting the body when Curve the part that tends to be caught in Pants.
I used a similar knee grip support in the Hayabusa Type 2, but because the projection was too high, it was easy to get caught in the Pants, and there was a thing that I could not remove the knee at a moment's notice, but there was no such thing in particular in this product.
It is not the feeling which is just fitting though it is written that it fits also Hayabusa of the type 3 in conformity.
(Looking at the examples of the two types of wear, the one I'm wearing is upside down.
However, it doesn't stick out from Tank, so it's functional enough.
I think I'll replace it with one that covers all the sides properly when it comes out.
View detail
Careful with the moulding!
I used to put Sponge type on the part where Cowl's knee hits, but it became tattered, so I replaced it with this product.
I have a Stomp Grip on the Tank side and it is comparable.
View detail
Knee grip for you!
I thought that I wanted the feeling of adhesion with Motorcycle more when I was doing a little Winding and Touring, and I was considering a certain Mr. Stomp, but I knew that there was a similar product with a cheap price and bought it.
I think that Evo looks better than Racing Type of a fine point as shown in the impression of the other person here. [Color] I bought Clear and cut out Seat by applying Vinyl of packing to Tank of Motorcycle for Universal Type and writing on Large size of Large body with Magic.
To be honest, the rattling on the edges is a result of my clumsiness, but you wouldn't know it from a meter away lol.
As for the impression that I tried to use it, I think that fatigue was also reduced when Knee grip became easy and Long touring as imagined after all.
I didn't mind the look, though it may certainly be to some tastes.
View detail
Fits: YAMAHA FZ1 FAZER
Easy to re-tension and really convenient!
I used it on my previous FZ1, and I really recommend it. But if you are not careful, if you do the knee grip on the machine which is leaning forward too much, the rubber pad will be shaved if it is Street Type, and the inner knee of racing suit and leather pants will be shaved if it is pro or evo. The grip power is preeminent, and I have installed this product on almost all of my road motorcycles such as MONSTER S2, cbr1000rr, yzf-r1, etc. View detail
Fits: SUZUKI GSXR1300R HAYABUSA
Makes Motorcycle more stable!
[How is it used?
I always use it when I'm in the car.
Was the one you received as per Image?
Buy it at Clear type. Complete [Color] Not Clear, but a little dull.
Was the installation difficult?
Just stick it on, but make sure it's well positioned.Quantity:Pair (for Left and Right) It's best to stick them symmetrically, and also to check where you can get the most performance out of them, depending on your riding position and where the tank is sandwiched between them.
How was your experience with it?
Very good. I thought it wasn't the type to run with knee grip, but it's very nice to feel the stability at the corner of the mountain road. I bought this kind of product for the first time, but I bought it out of curiosity because there were many comments praising it when I saw other impressions. I think the result was very good.
[Included Parts:were they on?
Sticker to put on the hole. degreaser.
[Was there anything that disappointed you?
I wish it was more transparent.
Point and hang of installation
If you want to put it on when it's cold, it's better to put it on while warming it up with a dryer so that air doesn't get in. In my case, I didn't paste it all at once, but warmed it up little by little from the edge, and worked carefully while removing the air, and I was able to paste it beautifully.
[Notes]
You can't reapply. One shot! If you miss suddenly, it is difficult to peel off. That's how strong the adhesion is!
[ITEMS TO BUY TOGETHER
The degreaser included in the kit is small, so you can use Parts cleaner or Silicon-off to degrease the tank before you put it on.
I've heard that Racers also use this product, so if you've never bought such a product before, you should give it a try. If you have never bought such a product before, I recommend you to try it out. I think I'll buy a Black Type next time if it gets worn out.
View detail
Fits: KAWASAKI NINJA 250SL, KAWASAKI Z250SL
Very good
In the photo, only the Pad of Tank side is shown, but the Pad of Cowl under Tank is also included.
I don't have an instruction manual for installation, so I don't know which direction to put it. I put it like that.
But when you ride it, there is a big difference between wearing it and not wearing it, and the Hold feeling is very good.
View detail
Personally, I recommend it!
When I changed my motorcycle, I installed it not only for the knee grip but also for the scratch prevention.
I used the same product on my previous GSX1300R Hayabusa and had already experienced the look and feel of the grips, so I bought it before I took delivery and put it on the same day I took delivery.
I used to be one of those people who wore nothing at all, but once you experience it, it's actually quite uncomfortable without it (laughs).
I've never used another manufacturer's product, so I can't compare, but I'm very happy with it.
I don't know how durable it is because I replaced it on my GSX1300R Hayabusa without riding it much, but I think I will buy this product again even if it goes bad.
View detail
Fits: SUZUKI SV650
I no longer care if the Leather suit is shaved.
I chose the evo because I knew that the inside of the connecting knee would be shaved. Since the Knee Grip Pad is the one I have used the most, I consider the racing suit to be one of the consumables. When I go to the circuit, I try to wear a clean and new leather suit as much as possible, but usually I wear a familiar one. These items are good, long lasting and cheap! View detail
You can securely hold.
It's very convenient that you can cut it to your favorite shape and it's easy to do grip and hold. The performance is not so different from the expensive ones, so you get a sense of value for money. View detail
I have a good knee grip.
I don't know if the paint of Tank and the affinity of Pants fabric is bad or not, but the seat slipped and slipped;
But with this Seat, it's a big improvement.
I have changed the shape of the car with Scissors and used it for other cars.
As long as you put Seat on the area where your leg hits, you can get a good knee grip.
Also, although it doesn't matter to those who use it without processing, it can be easily cut with Scissors for home use, so processing is also good.
View detail
I think it's good
Definitely cheaper than the famous Manufacturer.
I've never used the famous Manufacturer's products, so I can't make a comparison other than the price, but you can choose from three different types and two colors.
It doesn't come off, and I'm satisfied with Large for now, and
View detail
Fits: YAMAHA MT-09
Just the right amount of grip!
until now [Color] Although I was using Clear, I introduced Carbon Tank Cover. Because it was One-off of quite large-heartedness, Pad around the knee was newly developed in Black.
I recommend just the right amount of Grip power.
View detail
I'd recommend it over stomps!
I used it on my MT-09SP. I have also used the Stomp Grip, but the grip power is slightly higher than the Stomp, but the EasyGrip is sufficient for use with STREET.
The warts are also rounded so they don't hurt through your jeans.
Stomps are not good for STREET because they hurt my knees and my clothes hurt and tear.
So I recommend the EasyGrip here.
View detail
Fits: KAWASAKI ZX10R, KAWASAKI ZX10RR
The box is bumpy, but the performance is good.
The product I received was battered and cracked in places in the box.
The EAZI-GRIP Round Type Seal inside has a paper bag with a cleaner attached to it.
The peeling paper stuck to it when I took it off and it was dirty.
The Tank Pad is not particularly problematic, but I still don't feel good about it.
Even if it is made in a foreign country, I would like to see at least a minimum check before shipping.
I've used a similar Tank Pad in another car and the Grip feel is excellent.
It's easy to get a knee grip on the slippery tank, so you don't have to use any extra force.
I think there will be a big difference in the way you get tired after long hours of riding if you have it or not.
I am sad to say that the packaging was in a disappointing state for a good product.
View detail
good-natured person
I bought a Tank Pad because it's been a while since I've had to ride a motorcycle that has a knee grip.
There were many other pads if you look for the MAJOR vehicle, but I bought this one because I painted it original, so I wanted a pad to fit it.
It was Large to cut it to fit the shape, but I was able to put it on the body of the car to match it, so I was very satisfied with it.
View detail