Reviews
Inexpensive and strong adhesion … scary to peel off
I have been using the Tank Pad of TECSpecifications for GSX1300R HAYABUSA before and felt the necessity of the Tank Pad, so I tried this Tank Pad for my current car.
I'm in the All Pen. [Color] Select Clear, Body is [Color] It's a clear color, but it's a little yellowish for my color because of the pearl condition;
The texture is pricey, the adhesive is super strong and TECSpecifications can be reapplied, but if you peel it off, wrinkles may occur and the paint may be damaged.
It does the job as a Tank Pad with quality at a reasonable price.
Please don't refer to the picture because I don't have one for my model and I use other vehicles.
View detail
Fits: KAWASAKI ZX6R
I used it on Grom!
It is installed on the Grom of Honda, which is active in commuting and touring in Large. The one that I was wearing before was damaged, so I replaced it with this product! View detail
Fits: HONDA CBR600RR
It's a very ordinary Tank Pad.
I used it on a 2013 Repsol color.
It's a very ordinary Tank Pad, not too much, not too little, not too much.
It's built for the type of car you're driving so you don't need to do anything to it.
View detail
The place where you can make your own shape is good!
It's a Large model, so it's a Large model to find a Small model.
So this product, which allows you to create your own shape, is a great choice for those people.
You can use it to increase the area of the car, even if it is exclusive to a car model, or you can use it to increase the size of the car, depending on Ideas. Nice items that you can use.
View detail
It's just the right grip feeling.
I bought it to make it for the Tank Cover of MT-09SP by myself.
Material and shape, Evo, PRO and Silicon, all of which I've touched, and all of which I've used before But Evo has the most grip, so it's Recommendation. So, Silicon is....
As this is for home-made, you just need to make a mold with a piece of paper, cut it out and stick it to the mold.
In the picture, the part of Carbon is the part that I made by myself.
This is a brand that is also available for each car model and can be recommended.
View detail
If you want to improve your knee grip, you should buy it first
Used on CB1300
Quantity:1 Set of 2pc:Pair (for Left and Right) I can handle it
As for CB, Tank has a Large size, but the part that the foot actually touches is so Large size It's better to use the Universal Type Pad that you cut out yourself because there is no Recommendation
If you're not sure how to put it up [Color] I would prefer not to use Clear
I prefer Black or something like that because if air gets in, it's visible
When cutting, you might want to straddle the vehicle once and take the shape on the patterned paper
In my case, that's what I did, and it made me feel like I was able to do it:Pair (for Left and Right) I was able to cut it into the same shape at an even size
I used regular Scissors to cut myself, but does Cutter cut more cleanly? Hey …?
When you put the tank between the body and the tank when laying down, the body grips firmly The "Bumper" is a tight fit with the body of the car
Beginners are the ones who have put on a product that will affect these driving techniques in a positive way I think it's better
If the improved knee grip makes you feel more secure, you should put it on
View detail
BAM!
Motorcycle is mainly used by me for commuting to work“installation required& rdquo; I feel it is one of the products of the rdquo;
The ride quality and the way the car rides before and after it is installed will be completely different
You can grip the Tank firmly, and the body is less likely to Gap back and forth, so &ldquo ;comfortable position” you can keep the comfortable position and ride Mmmmmm, this is good!
It's also nice to be able to choose from product colors and grip surface shapes
The only drawback is that the image of the car changes when you install it Sort of
If I were to switch Motorcycles in the future, I can assure you that I would definitely buy one that fits I like it so much
View detail
I bought it to put over the external Tank Cover!
Because I wanted to use it on top of the Saigaya Tank Cover and the R6 OEM doesn't fit the shape I matched the shape with Universal
I am satisfied with it, except that the white margin on the edge is large and finicky
I chose Black because I am concerned about the deterioration of the product I have high hopes for the future
View detail
Fits: KAWASAKI Z900
High Grip!
Motivation
I used to use the Stomp Grip, but after switching motorcycles, I was able to get a car-specific product I chose EasyGrip because it was there plus the price was low
In terms of performance, I was hoping for an increase in the grip power of the Knee grip as well as the Stomp Grip
[About the product]
When it arrived [Color] I thought I bought the Clear, but I was surprised to see it in Pink
But this was the color of the backing paper, so when I peeled it off, it was normal [Color] It was Clear
Warts and warts are surprisingly large, and it is the first impression that they seem to get stuck firmly
[Pasting]
The important thing is how carefully can you avoid getting airborne? It is
This product comes with alcohol cotton for degreasing Let's
The work is done slowly, letting air escape from the edges
It's quite a persistent process, but let's not give up
I've heard it takes a while for it to fully stick to the motorcycle after it's applied, so I'll be on the motorcycle for a day or so Even if you don't ride it, you should work with Large sturdy Timing
Also, if you are not good at applying slowly, the black color is less noticeable even if there is some air in it Recommendation
[Color] It's quite noticeable when it gets airborne in Clear
Performance
Like the Stomp Grip, the Grip power is excellent
It's not a problem if you are wearing Motorcycle Pants, but if you ride with thin normal clothes, you can't get rid of it It's so stuck that it hurts
Excellent holding power in the circuit
Holding power and stability while cornering have increased dramatically
[Total]
You can't go wrong with this one
It also works like a tank pad to prevent scratches and improve the holding power when driving
When you buy a motorcycle, this is the first product you want to put on it
View detail
Fits: HONDA CBR1100xx (BLACKBIRD)
OK
Black Bird's Black body, so I chose Black Double- since it is a sided tape attachment, the durability and the fading of the body itself may be a concern It's there, but it looks slightly sporty just by applying it View detail
slippery (pro・[Color] Clear)
Ninja400 (18) It's not the tank of the "Tank" but a little bit below the plastic part
You can cut it into whatever shape you want in Universal and stick it where it suits you
A cloth containing alcohol for degreasing? It's also nice to see that it's included in the package
It's mainly street use, but until now, I've been using Axel on and off My hips used to be out of alignment, but after I put them on, that didn't happen and it became much easier to run
View detail
Fits: KAWASAKI Z1000 (water-cooled)
Knee grip is easy!
I bought this when I switched to a new motorcycle
This is my second purchase
I had it on a previous motorcycle and the knee grip was easy to use, so I bought it again this time It was
Before the Eazi-Grip, I used to stand up with my arms to support myself while breaking But after using it, it was easier to support myself with the knee grip
View detail
Fits: YAMAHA MT-10
Knee gripLarge
For better knee grip when winding and breaking I used to ride with Parenthesis on and open crotch and all that If you ride a motorcycle on FashionSMART, you have to have a knee grip Let's get in and rub our knees in
It looks like a race ish, and the grip is so strong that it prevents scratches on the tank and hides them It's good
View detail
I used it for Z1-RTank
We don't sell a car-specific Tank Pad for older cars, so UniversalSeat I made it by myself using ToRACINGPaper to match the Tank and paint lines I take a Large body mold and cut it with a thin-bladed Cutter Knife
It's a "PRO" grade and the color of the tank is Black I chose this one because it's an original paint job, but if it was the OEM color, light blue, I would have been able to get it [Color] Clear is the only choice
I'm also interested in the EVO spec. but I'm happy with the PRO for now It's easy to hold the posture and to have a firm knee grip even on the old car It helps to reduce
It's all about being able to design a good-looking preliminary sketch for yourself!
View detail
Fits: SUZUKI BANDIT GSF650
Very easy to use
Previously, I used other products, but since the adhesion was weak, it got me purchasing this item next.
This shape is suitable for Tank of R1100. Adhesion is also strong, Alcohol absorbent cotton is also tough, so you can easily paste it.
The feeling of use is thin because Pad itself is thin, even if you apply your knees to Tank, there is no sense of incompatibility, and at the time of Breaking and acceleration, it will prevent Gap from Tank firmly.
Speaking of the difficulty, it is odor of Rubber or it is sweet as it is fine. Because it smells awfully, it may be better to put out of the box for several days before putting it.
View detail
Fits: YAMAHA YZF-R1
Good compared to Stomp Grip
I purchased EVO for YZF-R1 2018 MODEL.
At first I tried to make it stomp, but the Panel part under Tank was [Color] Earlier I chose Eazi-Grip because it will turn black even if I choose Clear. Compared with Stomp used for 2 years at 14 R, the stomp grips with a point in a conical shape, whereas Eazi-Grip is spherical and grips at the face.
And when you touch the surface of the stomp with your fingers, it smothers, but here it sticks to your finger like Rubber. Even Denim and jeans have a powerful grip, and clothes do not hurt. Although you can move freely if you do not press the stomp, Eazi-Grip grips to some extent without pressing it. I think that preference is divided when this is staggered.
Also, although it is the difference between PRO and EVO, I tried a friend's PRO, but the Grip ability is inferior to EVO and those who go to pass or circuit recommend EVO. The advantage of PRO is that it looks more natural than EVO. As a disadvantage there is not a reference image so you have to paste it with your intuition while watching the image of Net. It is also very Rubber smelly.
I think that the price is also cheaper than Stomp, excellent in Cost performance, I think that Grip power is also above Stomp, so once it is worth using.
Raceetc of United Kingdom. It seems that it is almost used.
View detail
Fits: BMW K1300S, BMW K1200S
Knee grip is decided
It is also good as Design. Since I am wearing Leather pants, I was slipping when I used Knee grip before using, but after using it I decided very Knee grip. When UTurn is decided Knee grip has become Large change UTurn became easier. View detail
Fits: YAMAHA MT-10
To prevent scratches on Tank
I purchased it considering Tank's scratch prevention and improvement of Knee grip ability. In order to prevent scratches on Tank, we need a separate Protection Seat at the Center of Tank. As a texture Knee grip makes it easier for the knees to slip and there is no thing that knees get caught or get in the way.
There seems to be some goods whose surface is textured, but I decided on this item considering the Damage of clothing.
View detail
Besides that I am satisfied!
To be honest, I thought that Knee grip is ok without it, but I introduced it in the sense of prevention of scratches.
In fact, I found Knee grip easier than ever with scratches! But it was better not to be this wartime booth in design, but abandoning that there is no stock.
View detail
No good
As it was with Clear, if you think it is transparent, thin red (It looks like a different from a hmm photo)
Once you open Package, a nasty smell unique to Rubber can not be said
I returned it by haste.
View detail