Reviews
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF
All Product Contents are sold as Repair Parts.
CB1300SBSP (2021) It is attached to the
It is also worth mentioning that all Product Contents are sold as Repair Parts, which is rare in Aftermarket parts.
It's one or the other that gets mocked, right?
Also, it does not interfere with the design of the vehicle body when installed, or rather, it does not ruin the design of the vehicle.
I once spoke with someone in the sales department who told me that Quantity:Pair (for Left and Right) The length is different in the Pad of the
If it is too long, it may affect other places, and they have designed the balance when it falls down.
It may have that kind of functional beauty.
It is important to use a torque wrench when installing the Slider. Be sure to use a torque wrench.
The tightening Torque listed in the attachment is 44Nm for both Base and Pad.
In particular, the Base attached to the Frame must be used with the Torque wrench or the Quantity:Pair (for Left and Right) You'll be changing the yaw of the
View detail
I installed it on my 2021.
The hole punching stencil included with the package was useless for the '21.
The hole is drilled with a 22mm hole saw, and the hole is widened slightly with a Leutor Large→ If the hole is not widened, the piece for tightening will not fit.
Torque management is a must for this engine, as it doubles as a fixed Bracket Bolt.
Required Tools
53Nm available Torque wrench
22-24mmHole saw
Leutor for hole correction
The above is a must. If you do not have the tools, please have them installed at a motorcycle shop. If you have the tools, you can install it on the 2021 New Model CBR600RR by yourself.
The texture is great, I deducted one star because of the difficulty of installation.
It is better to remove the Under Cover first before working on it.
View detail
Buy Black
Exhaust System is Moriwa Short Tube.
I've got it all lined up.
No complaints about the price.
I have no complaints about the quality.
Is the Large sturdy even if it falls by installing it?
I don't know.
I don't even want to see the effects of the installation.
I'm going to do my best not to fall down.
View detail
Low price and solid
[How is it used?
Normal installation and use.
In the event of a fall, it reduces Damage.
In fact, I've been helped.
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
OK
[Included Parts:were they on?
As many as you need.
[Was there anything that disappointed you?
None
Why doesn't this come with the Standard when new?
View detail
It's better to put it on.
I bought it after seeing a vehicle with it installed.
The price was very reasonable and I installed it immediately after purchasing the Motorcycle.
It is installed at the same time as Sub-frame.
I think it looks powerful and good.
I've never fallen over, so I don't know how effective this is, but I'll be careful not to feel the effects!
View detail
This is for heavy vehicles anyway.
I adopted it, not because it's MORIWAKI, but because it's cheap and solid. I use Skid Pad on my heavy car for now because I'm worried about falling down.
However, since it is attached to the engine hanger, the burden is concentrated on the attachment part in a severe fall. 1300 has cracked the engine hanger… it is good for a light fall, but be prepared for this kind of demerit in a severe fall.
View detail
Dedicated products for car models to ensure
This year's CBR600RR has the SIDE covered entirely in Cowl, so this kind of When installing the Slider, the drilling of a hole in the cowl is mandatory, but this product has the It comes with a backing paper to confirm its position, so you can easily process it yourself (if you have the tools) I think
Also, I actually fell over once (at UTurn), but this product and the Side bag are not the same I was able to completely guard the Damage to the Body
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Great
I don't know how to install it because I ordered it from HondaDREAM, but it doesn't emit light on this product This is a review by Type, and is attached to the BOLDOR in Black, but it is a review by Circuit Thanks to this Slider, Cowl, you can protect Tank intact during SlipDown in Even though the Bar End was only slightly scuffed and I was wearing it as a good luck charm He is a small guardian angel View detail
Easy to install, solid and good
I used it on my ZEPHYR1100
It's very easy to install, and it's very easy to put on, and it's very much in the Construction Manual Torqueetc. was explained
I would like to make sure I don't buy the same thing, but I would buy it again in case of an emergency
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR
Safety in case of falling down
I installed it for the CB400SB, a wide 4 cylinder Engine There has been some standing stalling and other problems with the EngineCrankcase, but thanks to this, the EngineCrankcase has There is no damage It's modest, but effective View detail
Moriwaki SKID PAD mounted to a HONDA RC42
The skid pads are very nice made, fitting is without any problems, materials and mounting bolts are high quality. Gives a good protection for Motor and is very stable. View detail
That's what MORIWAKI is all about!
The quality is as good as the OEM Option
Of course, the Product Contents of the product sent to me were also correct
It is easy to install for anyone to understand
You are a very reliable Manufacturer!
View detail
Eventually
Because it was uneasy, after all, I had you install it at Shop. Because the weight of a single car is less than 300 kilos, it does not seem to work out with this Pad if it actually falls down, but it is good for design and it can be trusted because many other people are also attached think. View detail
Green light that blinks out is the best
Forced to GSX 1300R. However, this unprecedented green colored discreetly Slider is awesome. Moreover, it becomes the shape as long type and this is also the best. View detail
It blinks lightly!
As for GSX 1300 R, it was not Lineuped, so I dare chose for GSF. If you use Bolt of AGRAS you used before, you can also use Cowl drilling as it is. Length is also ample enough to show yourself the best!. However, since it is diverted, it is subtle whether it fits everyone's sensitivity. View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR
It looks good.
I knew that the Engine Guard made of iron is more durable but I bought it with emphasis on appearance. Jack-up and install Engine part by yourself. I recently heard it when I visited, but it seems that it is not possible to push the Engine relationship in the two wheel hall or naps so it seems that I do not install the Slider that needs to replace the Bolt supporting the Engine. It was said that there are kinds also in the certified factory. I put the ZrX 1200 R that I let go of without mounting Jack-up but this time I made Jack-up just in case. View detail
The product itself is nice. It's a cumbersome installation - -.
I bought it for standstill measures.
I have purchased Slider of this Manufacturer for a long time and have a sense of trust, but it is troublesome because it is necessary to boring Cowl drilling. Because my wage costs a lot if I ask the shop, I asked a friend who can do the processing and opened it. (Because it is an amateur, the position slightly deviates and the hole becomes large Large .... ) Once, since Seat which becomes a standard of the hole opening position is enclosed, if you use it, I think that there is no Large failure. maybe???.
Product making itself is well done. I guess I wanted you to make it longer for a bit longer (After all it turns, Cowl and Handlebar are likely to get many scratches)
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1300 SF
This is enough !!
Installation work of MORIWAKIs KitPad
Installation time is about 10 and easy.
14 mm Double-end Wrench × Quantity : 2pc
Socket wrench+Deep socket (14mm)
You can do it if it is there.
Easy to read Handling Instruction Manual - Easy
You can not pay fees at this level.
View detail
Moriwaki Crash Pads, Yamaha XJR 1300 (2005)
Pads are exellent, litlle smaller than Yamaha original ones but still great accessory to the bike. High quality item, Recommended View detail
I think Black will look better..
MORIWAKI's Skid Pad originally attached to ZrX is White
I think Black will look better..
Because it is not too self-asserting parts
As for the accuracy, it is said that it is worrisome that there is a gap between Left Side and Bush as Color goes around.
There is no problem if you install Torque wrench. (^^)
View detail