Reviews
Fits: HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250
A torque wrench is required for installation
I used it on my VTR250
When I attacked the 90°Corner near my parents' house at 60km/h, I fell down completely And that's when it became a powerful tool
It's true that it can't protect the entire car body, but it's enough to protect it from standing moss It is
A torque wrench is required for installation
If you tighten the Engine Mounting Bolt in a casual manner, you will probably have to wait until later I think you'll regret it
I think it's a good idea to check the tightening torque in the service manual
View detail
Fits: KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg
very good engine protector
this engine protector protects the engine, frame and tank from damage and scratch. thanks Daytona. i strongly recommend this to other riders. View detail
To protect the body in case of a fall
My friend asked me to install it on my GSX-S1000F
(I chose this product because of its low price and the power of the DAYTONA brand
As stated in the product description, it is necessary to cut a hole in the cowl to install the Protector ) is required
It comes with a patterned paper so that it can be opened accurately, so if you have a Drill and Files, you should have no problem I think (see photo)
But the product description is only a picture, and in what part of the Cowl? How much? I didn't have the detailed details of the following, so I would like to see this kind of information posted in the future
I've written up to this point, but after conferring with my friends, I still couldn't bear to drill a hole in the Cowl! It appears that the actual installation is not done by the manufacturer's instructions, but by the Bolt ( (Frame and Engine fixing part)
The size and length of the Bolt was fine, and all I had to do was remove the OEM Bolt and replace it
If it's another car Manufacturer, there were examples of this part of the car being installed The strength of the Protector seems to be OK, but it is not as strong as the manufacturer's instructions I feel that the cowl species will be less protected because of its rearward position
Actual performance and durability have not yet been confirmed, as it does not appear to have stood up or tipped over
View detail
Fits: HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 Super Four
Sliders. Very nice and high quality product.
I have long wanted to buy these sliders, but it didn’t work. And finally I bought it. After receiving the box with sliders, I immediately installed them on the motorcycle. They came up like family. Now I hope that when the motorcycle falls, the damage will be minimal. Thank you for submitting quickly. They traveled from Japan to Vladivostok for three weeks. I recommend this store to everyone, respectfully Yuri. I have long wanted to buy these sliders, but it didn't work out. And finally bought it. After receiving the box with the sliders, I immediately installed them on a motorcycle. They approached as relatives. Now I hope that when the motorcycle falls, the damage will be minimal. Thank you for sending it quickly. From Japan to Vladivostok, they walked for three weeks. I recommend this store to everyone, with respect, Yuri. translated by Google Translator View detail
Fits: HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR
Great
Good for CB400SF 2019
I sended to Vietnam
It's a good gift for my dad
View detail
Good thing I have it on!
When I changed to the Large model, I bought it and installed it at once because I felt that it was there somehow I bought it and installed it right away, and as I expected, it was almost undamaged, though I stumbled over it in a gravel parking lot I already got my money's worth View detail
Fits: HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250
proven product
There are many cheaper similar items available on the market but after scrolling through the whole lot of them I decided this to be the best proven quality. View detail
Many people have it installed?
I bought the RS at the motorcycle shop where I bought it when I was waiting for it to be delivered, and I was waiting for it to be delivered as well as myself Two of the three cars had this product on them, and when I asked the shopkeeper about it, he pretty much installed it when he delivered the car I heard that many people ask for a so I asked for it myself Just in case it happens, and more importantly, I am happy with Cost performance View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
I used to have it installed on another vehicle
I had them on another vehicle before It tipped over when I lent it to my son and it reduced Damage considerably
I wanted to install it on GSX1300R HAYABUSA, but I was reluctant to do so because of the need to drill a hole in the cowl I was
I bought it because other imprints said it came with a pattern and was easy to make holes in
However, the Instruction Manual initially drills a hole in 20mm and the dimensions of the collar It was spread out with File to 22mm, but realistically, the finish will be dirty
I drilled the holes from the beginning with a 22mm Hole saw
I worked from the Left Side first, but this one was fixed and installed in one shot
Right Side, followed the pattern and carefully drilled a hole, but seemed to Gap forward about 2mm In order to have become not to fit with Screw hole, it corrects with Cutter and File
The shape of the hole is not clean, but if you wear the Body, it is not noticeable
However, the work of desperately widening the hole in File is very Large strange
I worked on the Stick File, but if I was clumsy or forceful enough to scrape it off, the momentum was enough to get it to Cowl 2 It was scratched in about a few places
Be careful when applying files
I wish the stencils were more accurate
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
Individual differences? The mounting screw didn't fit on the
It's a good thing, but for some reason I'm going to install it on my GSX1300R HAYABUSA When I loitered, the included Bolt didn't fit well
It also seems to be rather short in length
So I bought and reinstalled the M10 fine threaded 130mm bolts
Bolt doesn't fit, so I gave it a low rating
View detail
reasonable price
Installation & rarr; Easy to do even as a do-it-yourselfer, just replace the Mount Bolt Because Jack and Maintenance Stand are required to support the Engine
I'm not a fan of this dress, but I'm a fan of the way it looks and rarr; it's a standard shape, so it's not a white surface I'm not a fan of the dress-up effect compared to other companies' products I don't blame you
There are two types of fitment for MT-09, one for up to 16 and one for 17 or later, but the one for 16 is installed on 17 It is not possible to do The length of the color and Slider are different so that the Spoiler of the Blinker part escapes
Also, it is not possible to protect the blinker because it is installed inside the OEM blinker We can't Let's give it up You should think of it as just Tank and Engine protection Use it with other Slider
Performance → If you are standing on your feet, it will protect you well I've fallen down loudly before with other cars with this Slider installed, but All of the Slider has been shaved off and the Cowl has cracked too
The Bolt of Engine Mount was also bent, and it was Large strange to remove The best thing is not to fall down
All parts can be purchased individually at Repair Parts for this price point, just one of them Even if it hurts, it helps
If you care about looks, use the expensive Parenthesis good one I feel like I'm going to need a Daytona product I like it because it's cheaper when it's damaged
View detail
Simple Design
Custom parts like things that do not disturb the original atmosphere. Various things are released to Z 900 RS, but I bought Logo and DAYTONA products without decoration. Installation was popping, it took about 10 minutes. I'm satisfied with my favorite item. View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
Although it was used in combination with other products, it has no complaint!
【What made you decide the purchase?】
Purchased for the purpose of alleviating the damage of the vehicle caused by fall by using Circuit traveling.
【How was it actually used?】
The other day I raised SlipDown at the time of Left turning of HSR Kyushu Racing course and toppled over.
Used with other company's products (OEMOPEngine slider ? babyfaceRear Sets ? RDmotoRear Axle Slider), but Engine and Frame ? I think the exterior has been unharmed, so I guaranteed it securely.
* Car Both Sides's Damage is a Clutch lever (Foldable) The extent to which Bar End rubbed. It may break unless Retractable Lever is introduced.
【Mounting was difficult?】
It is not difficult because you can stop at Bolt 1 pc each.
【Please tell me the installation point and hang】
In order to remove Engine mounting Bolt, I think that those who worked One Side at a time will be less likely to hurt Screw Mountain.
[Is there anything I was disappointed about?]
None.
【Hope for Manufacturer ? Please let me know if there are any improvement points]
There is also this.
【Have you compared items?】
price ? Delivery date ? I did not have this as it was a nomination buy when I saw Brand.
[Others]
As Repair Parts for falling, it is very appreciated that there is only One Side setting.
Also as stated in the description of the product, not only for XSR 900 but for the MT-09 type car structure, Left SideCrankcase is out of the vehicle, so it can not be protected with this product alone.
Be sure to use Engine Guardetc. Please use in conjunction.
View detail
usually
In the picture there is a red line, but in fact only Black.
It's easy to install around 10 minutes.
Although it is explained if it multiplies Jack, I think that it is unnecessary.
Because it gets hurt if you defeat it, is it cheap and good with a good product?
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
Very satisfied
I think that it is a good quality, reliable Manufacturer, and also excellence in Cost performance can not be missed.
It looks nice, there is also a sense of quality and the impression of Motorcycle also changes. I think that it is recommended product by all means.
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
It is a standard product
As for installation, when Cowl was removed, Cowl's
Drilling was done.
I think you can do it while it is attached
Sponge inside Cowl and Cowl's facet are Engine part
Because it enters into, it is troublesome, but when you remove it to do it
It is recommended.
I think that the effect will be useful for standing.
I'd like to have not only Black but also other colors.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
great little purchase
they look really good, blends right into the bike. very easy in install just need to make sure you have sorted out the bolts right. one of them is longer then the other and one of the washers is thicker. like it said in the description the directions it comes with are in Japanese so unless you have a friends who can read it out to you its pretty much just a guessing game. View detail
Looks great!
I've pushed the brightness on the picture to show that white metal bar that you put inside sticks out a bit on an FZ07 (MT-07) but other than that it looks like a great quality item and it much nicer looking than the cheap generic ones. View detail
Fits: HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR
Attach as an amulet
Standing guts ...
There are a lot of videos of standing up on YouTube, so we installed it because it is not person-by-person.
Since it is not a Type to be attached to a Frame, we asked the vendor for installation.
View detail
The sense of security has risen
As I was able to self-run thanks to Slider when I overturned with another Motorcycle the other day, I made it to this product with a good reputation to attach it to MT-25. OEM's Bolt is pretty tough, so let's bite the Extension to the longer 8 mm Hexagonal Wrench and unexpectedly turn it off. All we have to do is install the Slider. It was easy to do without Engine's Jack-up. View detail